Having problems with your Beko Dishwashers ?

Can waste pipe be connected directly into sink waste u-bend


Answers :

Yes as long as it is before the u bend (pea trap).

If you do not have the connection already there (I assume not). Go to the home improvement store and and ask the plumbing guy for the dishwasher connection. You will also need glue and primer.

Cut into your drain line and remove just enough to fit your new connection. Note that the drain slides about half and inch in at each end so leave enough to do that connection.

Clean and prime the drain lines and new fitting.

Apply glue to fitting.

Insert the new fitting.

Connect your dishwasher per instructions with your unit.

Hope this help. Please rate this solution.

Thanks
Repair Help & Product Troubleshooting for Beko Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can waste pipe be connected directly into sink waste u-bend


Yes as long as it is before the u bend (pea trap). If you do not have the connection already there (I assume not). Go to the home improvement store and and ask the plumbing guy for the dishwasher connection. You will also need glue and pr ... Beko Dishwashers

Hotpoint dishwasher I need to change waste pipe on my hotpoint dishwasher. I was given this dishwasher by a friend and it works well but I cant connect the waste pipe to the bit under the sink as the rubber connection on the end is missing. I bought a new waste pipe but not sure how to connect


Did you have a dishwasher before? If so, you must have had a sink tail piece with a dishwasher drain coming off the side. For the connection, you may have to get an adapter to fit the end of the dishwasher drain hose to the sink tail piece. Take a ... Dishwashers

Frigidaire 2405 Dishwasher has a direct drain into the floor and is too far from the sink to be able to drain into the sink pipes. Can I add a loop of drain hose from the floor drain up to the counter height, about 30", then back to the floor to mimic the loop that would be created by running to the sink drain? I have been told that these new types of dishwashers require water remaining in the pipes to work properly. Thanks, John


There will be no problem with you adding more drain hose to the unit. ... Frigidaire Dishwashers

The waste pipe on my hotpoint dishwasher is connected to a spigot. I now want to buy a Bosch replacement but all models have a waste pipe which is too small in diameter to fit the existing spigot. A smaller spigot does not seem to exist and there is no room to install a stand pipe. Can you suggest a solution? Thanks


Do you have a garbage disposal? It is usually easier to drain through the garbage disposal. There is a fitting for this on all disposals. Be sure to remove the knock out plug first. ... Dishwashers

The water discharge line is connected to a unit that is mounted to the sink. This unit in turn has another line that is connected the the house drain. This unit is sparying all over the sink, counter and floor. What is the purpose of this unit and why couldn't the drain from the dishwasher be connected directly to the house drain?


It is a unit to stop water flowing back into the Washer... I suspect it is blocked... You probably need a Plumber? ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Hello, I have a Neff Dishwasher S5453X1GB/74 and it's not draining the water out at the end of the cycle. I have unscrewed the filter and released the impeller. I have also cleared the waste pipe that runs to the sink waste and put loads of cleaner in the dishwasher. The pipes seem to be clear as water goes somewhere during the cycle but backs up at the end. A few times when I started a cycle the water did not spray out but I could here the drainer or motor? running. I jetted water through th


... Neff 24 in. S5453X1 Built-in Dishwasher

Whirlpool Dishwasher Model #GU940SCGQ2 waste water from sink drain entering the dishwasher. Drain hose drains into same pipe as sin drain. Drain hose is elevated and looped as high as the top of dishw


... Whirlpool Dishwashers

Im having a problem desiding how to hook my drainage pipe up from the dishwasher i cant put it next to the sink cause theres no room so i have to put it on the other side of the kitchen could i connect new pvc pipe to the drainage pipe underneath the floor or do i have to put it above the trap


You can put a new verticle pipe up from under the floor and put the drain hose in that. make sure the vertical pipe comes up to about worktop level and make sure there is a water barrier in it or you will get a nasty smell ... Dishwashers

I have a newly installed Kitchenaide dishwasher. The copper pipe is secure under the sink and appears connected properly to the dishwasher. When I turn the shut off valve on, water begans to run from underneath the dishwasher. There is no water under the sink. The plastic hose does not seem to be the problem.


You should be able to remove the panel below the door and see where water inlet hose is connected to the solenoid valve. I'd bet that's where it's leaking since you say it's newly installed. ... Dishwashers

Just purchsed G1173Vi - failed to fit due to exiting pipework on wall being directing in line with the inlet hose which is located directed above the waste hose. Had no problems fitting previous 2 dishwashers, is this common? Pipes are sealed to the machine Can you suggest a solution? obviously I cannot move exiexisting pipework.


Hi there!\015\012\015\012You say - "obviously I cannot move exiexisting pipework."\015\012, but I would consider it necessary if you need to fit this machine.\015\012\015\012The only other option is to fit a diferent m ... Miele Dishwashers

The dishwasher works fine if you let the waste go straight into the sink, as soon as the waste is connected properly it cuts out in mid program any ideas? Thanks Paul.


The pump what pumps the water away is seized or blocked or plain and simple goosed or the waste for the dishwasher is too high as per manufacturer ... Dishwashers

The overflow air drain on top of the sink that is connected to two hoses under the sink is leaking. It leaks out the top onto the counter. I took it abart but am afriad I did not put it back together right. There is a rubber ring that I think must be for sealing and I put it directly on the counter and then screwed down the air valve over this and water s coming out of the air flow valve and all over the counter.


... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

Hi, how do i install my dishwasher....i dont know where to connect the water supply pipe to as i dont seem to have a tap under the sink for it to be connected to, can anyone help please.


You'll have to tap into the hot water supply for the sink to get a connection for the dishwasher. This is a moderatley difficult plumbing task. If you don't have plumbing experience, it's probably best to call a plumber.\015\012\015\012 ... Dishwashers

I have an LG dishwasher LD2120WH and the waste water pipe has split right where ti endered the machine. Can I remove that little white 'plug' and re-connect the pipe or do I have to buy a completely new one? Can you assist me. Also the wheels on the trays dont last and I would need some of those too.


... Dishwashers

Zannusi 24 911711057 serial number908805364 water from kithen sink goes back down dishwasher waste pipe into machine the ubend under sink is not blocked advice please asap thanks anthony wanford


Hello, your might have blocked kitchen drain? If not blocked, check that your dishwasher drain pipe has higher point then conection to waste pipe. ... Dishwashers

The dishwasher is 10-12 years old, just started to not empty. Checked the waste hose for kinks and bends, checked the plastics underneath the sink for blockages- none found.


The float inside can get stuck sometimes. ... Belling 24 in. IDW602 Built-in Dishwasher

I have a Danby countertop dishwasher. DDW497W what I want do to is connect it directly to the hot water line and my waste line. Can this be done or would it cause a problem?


No problems.............just do it..............\015\012\015\012cheers.................. ... Dishwashers

A loud noise from the pipe that connects the dishwasher under the sink. Would that be a problem with the machine??


It must be the drain tube and the sound is coming from the drain pump.It is possible that the drain motor is jammed and makes the grinding noise with some objects struck inside.So remove the drain piipe, the drain pump and clean the unit.\012Te ... Whirlpool Dishwashers

Ref: NEFF Dishwasher S5555XOGB/70 (FD No. 8602) Problem: Does not drain at end of wash cycle. Checks/Symptoms: 1. No blockage in whole of drainage system, system and filters are clean. 2. Pump does operate mid wash cycle ? drainage tube can be felt pulsing and pipe gets warm right through to the main drain connection at the ?U? bend. 3. At end of wash cycle the pump appears to still be trying to run but there is no flow, even when the door is opened. If machine is emptied by hand the pum


... Dishwashers

I have a hotpoint hydrocare de luxe 7843 model it isnt plugged into the mains or any water flowing through it but when i was filling up the salt container some water split out and drained away and then leaked from the bottom just by the connection for the waste pipe


... Dishwashers

Hi there can a waste pipe extension be cut and then connected to a p trap spiggot? many thanks dean


Bit of silicon sealant and a jubillee clip ... Dishwashers

Have a Kenmore Freestanding Dishwasher that was working when hooked up to the sink. When we plumbed it in and connected the electrical directly, we now get an "F4" flashing on the panel with a beeping noise and the pump sounds like it wants to drain but just get a sucking noise. I've tried putting water in it to prime the pump, but still doesn't want to work. Do the codes mean anything, or point to a specific part?


... Kenmore 24 in. 16332 / 16334 / 16339 Free-standing Dishwasher

I have a Diplomat ADP 8520 dishwasher (possibly SMEG manufacture) which will not stop trying to empty. There are 4 leds lit reading left to right and it beeps. I have read on some forums about pressing the programme button 4 times or holding it down for ten seconds to clear the fault but neither of these solutions work. I thought maybe that the drain was blocked but I put the pipe directly into the sink and it empties ok, problem is, it does not stop.


Fault is probably water in the bottom tray operating the anti-flood device. take bottom front panel off and mop out the water and it will work. if fault reoccurs then you have a leak ... Dishwashers

This a message for phil. The aquastop valve was not under the dishwasher. On my model, it was fitted directly onto the water inlet pipe. I replaced the valve as you suggested. After removing the old valve you could see through the clear plastic housing that water was leaking inside the valve. Anyway replaced valve but had to split wires and reconnect with connections supplied with the valve and according to instructions. Water leak has now stopped but when 'on' button is depresse


Please provide dishwasher make and model. Looks like you are retrofitting the valve to your dishwasher which may not be getting the correct supply voltage from the dishwasher control. Will need to understand part no. of the replacement valve you ha ... Dishwashers

Should the DL model drain be connected by way of indirect waste to prevent contamination due to backed up plumbing ? and if so, can I just run a hose to a floor sink?


... Moyer Diebel 25 in. DF Free-Standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0554 seconds