Having problems with your Beko Dishwashers ?

Dwd4311 dishes on top tray are not being washed, I think that it is not lining up with the top tray water outlet


Answers :

I have some problems with my DWD4311 not giving clean results. It has improved it's cleaning ability if I push the top tray all the way to the back before switching on the wash. The water supply for the top spray arm is provided at the back of the washer and if the top tray is not pushed to the back I think a lot of water is wasted and the top arm does not get enough water pressure to do a good clean. I also think that this wasted water means that the water pressure for the lower arm is reduced also. So try pushing the top tray back as far as it goes before switching on. Good luck everyone.
Repair Help & Product Troubleshooting for Beko Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dwd4311 dishes on top tray are not being washed, I think that it is not lining up with the top tray water outlet


I have some problems with my DWD4311 not giving clean results. It has improved it's cleaning ability if I push the top tray all the way to the back before switching on the wash. The water supply for the top spray arm is provided at the back of the wa ... Beko Dishwashers

I have a Fisher & Paykel fridge (freezer top, fridge lower) probably approx 3 to 4 years old, fridge and freezer works ok, but drips water from top plastic tray below freezer into fridge and into door trays. I'm thinking that defrost or whatever line is blocked (possibly/hopefully ice) Will turning fridge off for a few days fix it ? or is it something worse ? The round plastic bowl/catcher is always empty thank


Hi,\015\012The drain may very well be blocked with ice....that is not at all uncommon...\015\012\015\012Let the fridge off for a day to clear any ice and then blow through the drain to make sure it is open...\015\012\015 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher problems Purchased new Bosch diswasher last week. Dishes were EXTREMELY cloudy, so thought that we had purchased a lemon. We returned it and purchased top of the line Kitchenaid. Installed it today and dishes were still EXTREMELY cloudy. Do you think that the problems originates in the water heater.


Www.dishwasherfilter.com has a great new product out that filters the water going into your dishwasher. it reduces minerals that cause that white build up or residue. it go ... KitchenAid 24 in. KUDI01TJ - Multiple Color Built-in Dishwasher

My Whirlpool dishwasher is not cleaning dishes in the top rack. I don't think the wand is spinning. There may be a blockage in the water pressure line. How can I check this?


Hi,Here is a tip that will help you...http://www.fixya.com/support/r4319937-dishwasher_maintenanceheatman101 ... Dishwashers

The top rack dishes do not get cleaned. I have run the vinegar rinse. The bottom rack dishes get cleaned. It doesn't even look like the top rack dishes get wet. I ran the washer without the top rack in and I think water was coming down from the top. What can I do?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers

My Frididaire Dishwasher Model FDB1250REC1 is discolored inside. Its a browninsh color and it has gotten on my Corningware dishes and stained some of them. I can get most of the color off the dishes if I scrub hard. I have run cleaners for the dishwasher thru and cleaned it temporarly. Do you think this is the soap I use, amount of soap or maybe the water. Not sure its the water cause there is another one on my water line that is not really having this problem. I always run hot water just before


So you need to install a water filter, before you connect water supplie, then you need a special soap to clean wachine (Calgonit diswasher cleaner powder ) use-it without dishes. then use a dishwasher salt (to disolve all water dirt and colour) and r ... Dishwashers

The water does not rinse the top tier dishes. The plastic rotating water sprayer that sets under the top tray is full of particles. Is there a replacement part we can get since it is nearly impossible to clean out this sealed water dispenser part? Thank you. Dave


Http://www.appliancespartsdirect.com/ariston/11389-spray-arm.html\015\012\015\012\015\012Here's the part, but I also thought of something; what kind of particles are in there? if it's soap, or grime , something soluble, you could just take off ... Dishwashers

I have mod. # FDB1050REB0 the top rack wash/rise arm is not turning at anytime during the wash cycle--- We are not covering the hole into which the water is being pumped---- the bottom washing is turning---- this leads me to to believe the line to the top arm is obstructed from the pump to the wash outlet (in the top of the machine)---- what can I do to check the line?


Hi\015\012\015\012Please check if something is blocked near the top spray arm\015\012and also make sure that all holes are open. Use a sharp metal pin to clean the\015\012holes on the top spray arm. Make sure the water pressure is not low ... Frigidaire Dishwashers

Middle and top spinners do not spin The pump is pushing water up the back delivery tube. There are no dishes in the unit and I was able to trick the door into thinking it was closed so I could watch what was happening. Or Not Happening The spinners are completely free of calcium or soap build up and both top and middle are easily spun with a finger. While the pump and bottom spinner were working, I pulled the top drawer out partially and there appeared to be a good flow of water coming out of


Hi,\015\012 Remove each spray arm and check it is clear of food particlesat the jets. The next problem may occour at the rotating joint . If the seal is not good, you can loose a lot of water out of this point.. If both of these seem reasonable ... Dishwashers

Dishes, especially in the top tray, come out with 'sand' dried inside. It is a GE dishwasher that does NOT have a tower that comes up from the bottem, but rather a rotating water dispenser directly under the top tray.


The solution could be something as simple as changing your detergent. Do NOT use liquid detergents. Dishwashers have some delicate parts and the gel and liquid dishwasher\015\012detergents tend to gum up the works, especially around the soap door\015 ... Dishwashers

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

The top rack isn't getting clean. Could this be a pressure problem our an internal problem? It's not whishing like it used to. The water isn't reaching into the glasses. I think the only water getting to the top rack is what is sprayed onto the bottom rack dishes.


My husband told me to call a repair man rather then going through FixYa.Please take me off your mailing. Thank You ... Whirlpool Dishwashers

The top rack will not wash i dont think the water is coming down from the top to make the arm spin with water and qash the dish


If you are mechanical, remove the dishwasher out to your garage or patio and clean out water channels or tubing. Depending on your skills you'll see they are simple machines. Basically a box, a pump, timer and solenoids. ... Dishwashers

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

When I take a glass or cup out of the dish washer after they are cleaned and heat dried, or a day plus from the cabinet to put cold water,too many small bubles are floating on top the water surface, as a soap-like condition; it clears up shortly. The tech told me it is normal. I think it is not normal because I suspect the rinsing is not totally complete because of the water conservation design. Am I drinking soap-water?


Use a rinse agent., such as jet dry. the owners manual will provide you with the specific location as to where the rinse agent dispenser is locatedl ... Dishwashers

Not cleaning dishes especiialy the ones on top rack. Found some broken glass pieces in bottom. No obstructions in line leading up to top washer. It looks like the pump is not pumping enough water pressure and/or volume for the top washer to function properly. Please help. Whirlpool Quiet Parnter I. Approx. 2-3years old.


If you remove the filter in the sump area underneath the lower dish rack (removing the screws to do so) you may find debris blocking/jaming the impeller area. Be very careful of almist invisible broken glass. Inspect the impeller to make sure it is ... Dishwashers

We have a built in GE dishwasher. It has worked fine for about 4 years but now the glasses in the top rack will not come clean. I have cleaned all the holes where the water comes out but I think the sprayer that is beneath the top rack (the one that is attached to the bottom of the top rack) is not rotating. We had someone out to take a look at it and they said it was fine. It isn't fine as it is not cleaning the dishes. Is there a reason that the bottom sprayer is not turning?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwasher

Ran the dishwasher and the water didn't drain completely. Checked the drain line for clog - it was clear. Scooped out the remaining water (barely covered the flat wire mesh filter in bottonm of the machine) and cleaned off the canister mesh filter and carefully relocked the filtyer in place. Tried to run the machine last night. Soap tray opened but apparently no water cycled through the machine as all the soap was in the bottom of the machine. The heat never turned on to dry the dishes and


Hello Ramona Doug,\015\012 Try disconnecting power from your dishwasher for a few minutes to clear the memory and then reapply power again. Start a wash cycle without dishes on the hottest water setting and after a few minutes.. pause the wash ... Bosch Dishwashers

Upper spray arm is not turning and I don't think water is coming out. Dishes on top are not coming clean. Dishes on bottom are clean (as clean as they get with this dishwasher). How do I remove upper spray arm. Also I'm not sure how to remove lower dish rack to access upper spray arm. Any help appreicated. Kitchenaid model KUDP01FLSS5 Chris


Hi Chris,It sounds to me like a restriction in the pump. I put together some information here on cleaning it out. If you try these please give me some feedback as to if they help or not.Thanks! ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

I have a GE Triton XL dishwasher that is not spraying water onto the dishes. I just reset the power, and that didn't help. Putting it on the rinse only or wash cycle fills the bottom with water, but it sounds like a trickle vs. the spray. The heating element comes on and the soap door opens, but there's not spraying. I made sure there was nothing clogging the water line or other parts. What do you think is wrong?


... GE Tritonr XL GSD6260JCC Dishwasher

Hi, my hotpoint aquarius df61 makes all the noises of washing, i hear the water going in, motor is running, however i dont believe the spray arms are revolving, so the dishes are not getting clean. i have cleaned the individual holes in the spray arms, but i don't think the water is getting up the back pipe and into the top spray arm. it does not spin at all. no problems draining. help please. and were can i get a copy of the user guide, free preferably. thanks


How old is your machine? it is posible to have something in the watwr pump, you hear the water and the motor, but the fan of the pump (washing pump) is blocket. also the pipes hat make connection to the water pump and the arms. at someoane i found gl ... Dishwashers

Water is suppose to go throw and turn those spriklers inside the dishwasher but mine is not working.I love my Frigidaire but it is not working right.serial # TH24181756 and the other number is FDB956RBCO the O has an angled line throw it /.black on top and stainless on the bottom.It seams fill up with water and is hot and steamy and when it drains it drains great.it sound like its working but it is not cleaning the dishes,even simple derty dishes.Help Help.Daren K Chidester 13233 peter Kalama Dr


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDBS956CC Stainless Steel Built-in Dishwasher

After it cycles I open up dishwasher and the soap tray is open with soap leaking out and on dishes. How can I tell if this is a problem with float switch or water inlet valve because I think it's not getting any water? have maytag MDB3700AWE. also checked to make sure nothing stuck in float.


Try this link it should help http://appliancehelponline.com/dishfloatwaterinletvideo.html ... Maytag 24 in. MDB4600A Built-in Dishwasher

I have a Bosch SHX98M dishwasher and the top arm will not rotate. I can see water coming out of the holes when open during a cycle and I have made sure there are no obstruction for the arm or anything stuck in the arm feed line. I just had a technician here who was at a loss and did not think the pump was bad since alot of water is being pushed around inside. The bottom arm works fine.


... Dishwashers

I have a Bosch "Classic Electronic" dishwasher that has been in use for only 18 months. If it helps - SGU53E05AU/30 is marked on top of the door.. my problem is that on the last cycle, the water won't drain so I am left with lovely clean dishes but there is water up to the drawer line present and it won't drain until the next wash. I have cleaned all the filters and ensured the pipes are not obstructed. It is odd that it only does it on the last cycle. Could it be the microchip?


Hi there,\015\012\015\012thank you for providing the model #, that helped me narrow down the troubleshooting.\015\012\015\012try the following to fix your problem:\015\012\015\012check for blockage or kink in the d ... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1770 seconds