Having problems with your Black & Decker BDP2600 Gas Powered Pressure Washer ?

I have a black & decker pressure washer model PW1600 and its not getting the high pressure anymore. any ideas


Answers :

Check the unloader valve (pressure relief valve) probably need to replace the o-ring. it should be on the side of the pump and have a large spring. just unscrew and replace.
hope this helps.
I HAVE A PW1500 THAT IS NOT GETTING ANY PRESSURE, WHAT CAN i DO???
Repair Help & Product Troubleshooting for Black & Decker BDP2600 Gas Powered Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a black & decker pressure washer model PW1600 and its not getting the high pressure anymore. any ideas


Check the unloader valve (pressure relief valve) probably need to replace the o-ring. it should be on the side of the pump and have a large spring. just unscrew and replace.hope this helps. ... Black & Decker BDP2600 Gas Powered Pressure Washer

I have a model PW 2200 gas pressure washer. It suddenly lost it's high pressure the other day after working fine for @10 minutes. It's getting plenty of water, but the engine doesn't seem to rev up to give it the high pressure. The operating instructions say to check the oil in the engine, and the PUMP before starting, but I haven't found any place to check for an oil level in the pump????Any ideas, I'm very confused.


... Pressure Washers

Just purchased Black & Decker PW1700spm pressure washer. Can't get the lance hose onto the reel. How do you get it to wind onto the reel?


... Black & Decker Pressure Washers

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

I have a 2200 Troy Pressure washer, I cannot get it to draw a detergent solution. I am using the black soap nozzel, i have a new siphon hose. any ideas?


Dismount the bolt that is use to connect the soap line.Turn on the washer and test if you fill if is "suction" intake air.Sometimes it becomes clogged so see if anything is clogging the suction .Is that not work the suction system is bad. ... Briggs & Stratton 2200 PSI Gas Pressure Washer

Require manual for pw1600 wsr+ - Black & Decker Pressure Washers


... Black & Decker Pressure Washers

The black panel on our belling 603 has broke. Any ideas of where to get a new one from because i have been told it is not made anymore!!


I'm not sure if you're talking about the door panel or the kickplate panel or both, but you should be able to find what you are looking for at www.applianceart.com. They have black panels, white, stainless, colors, designs, etc.... applianceart.com ... Belling 24 in. IDW603 Built-in Dishwasher

What do you do to get the soap to come out - Black & Decker 1700 PSI Electric Pressure Washer


... Black & Decker 1700 PSI Electric Pressure Washer

Black & Decker PW1700SPM Pressure Washer hose broke where can i get replacement


... Black & Decker Pressure Washers

I have a KARCHER Model K 2401 which onstart up has normal water pressure rather than the high. I can usually get it to work by removing the tip, pressing the trigger and running some water through without the tip on. The i replace tip and it will usually retain the high pressure. If I stop depressing the trigger I have to go through these same steps. It is like it loses prime. It works well once I get it started putting out the high pressure.


... Karcher 2500 PSI Pressure Washer

No high pressure. has been a consistant problem for a while. Was able to get high pressure to "kick-in" before by removing nozzle, squeezing trigger to "prime" high pressure, then quickly put nozzle back in then it would work. now it doesn't work at all.


See this link to fix the problem ... Honda Karcher G2400HH-R Pressure Washer

Low pressure While I initially get high pressure, when I resume washing after having released the trigger, water pressure is low. By removing the nozzel tip and reinstalling, high water pressure is resored. What is happening?


If this keeps happening repeatedly it sounds like you need a new seal kit put in it can be done easily enough by you or you can get a shop to do it , if you live in a cold winter climate be sure to winterize the washer every year or keep it somew ... Karcher 2500 PSI Pressure Washer

I have a campbell hausfeld 2450 pressure washer with water coming out of a brass hose nozzel right next to where you screw the high pressure to the pump as soon as you turn the water on from the house, start it up and high pressure comes out of it and the hose about half pressure, any ideas?


This is called the chemical injector which enables you to insert the hose for you to dispense the soap and or chemical by utilizing a soap nozzle .apparently inside this barb you will find a ball a spring and a o-ring,find the replacement parts or ki ... Campbell Hausfeld Pressure Washers

I have two DeVilbiss issues: First, on my pressure washer, I no longer get pressure on "high" mode from the hose. I prime the pump but it doesn't seem to be creating enough force for a high pressure. Second, on my generator, the gas from the gas tank leaks out. The tank is plastic or poly and don't know if it's a gasket issue.


... DeVilbiss Pressure Washer Hose 3600 Psi 25'

Black and decker 1550 psi electric power washer getting handle back together


... Black & Decker Pressure Washers

Hi have a Karcher 6.91 and I cant get any high water pressure. It has power, I have checked the o-rings, filter and lances but it does not build up high pressure. The water also appears to flow back


... Pressure Washers

Back & Decker PW1300 no pressure - Black & Decker 1700 PSI Electric Pressure Washer


... Black & Decker 1700 PSI Electric Pressure Washer

Hi have a Karcher 6.91 and I cant get any high water pressure. It has power, I have checked the o-rings, filter and lances but it does not build up high pressure. The water also appears to flow back


... Karcher Pressure Washers

DuraBuilt 1404. Motor kicks in for two seconds, then quits. High pressure hose blew off and I could barely get it threaded back on. Quick coupler broke so I hooked garden hose up direct. Is lack of quick coupler maybe the problem? Could I be missing a part on high pressure hose that makes it so difficult to thread onto male fitting? Thanks! Bob


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

2-yr old troy-bilt pressure washer with honda gcv160 engine. seems to run well, but when trigger is pulled get full pressure for less than 5 seconds before reducing to house water pressure. when left running, looks a black plastic pressure relief valve starts blasting hot water. appreciate whatever insight you can give. Thx


It sounds like an air lock. Try this: With the machine off, connect the hose to the washer and let it run for several minutes to get all of the air out of the hose, and to purge any air out of the pump. Shut off the water, and connect the high pre ... Briggs & Stratton Pressure Washers

Black & decker pressure washer 1900


... Pressure Washers

High pressure hose connection blew up. Fix? or buy new?


Yes take it to napa auto parts and they can cut and attach a new end which are for hydraulics. They are crimped on and meant to hold very very high pressure. I used to use a pressure washer everyday for a living and it was a tractor rental/repair sho ... Pressure Washers

Briggs and stratton generac pressure washer not getting high pressure model 1908


... Briggs & Stratton Briggs Stratton 2000 Psi Pressure Washer Freeshp

Excell vr2500 pressure washer ,no pressure, took off high pressure hose at bottom of washer , get water flow, but flow does not change when engine is running full throttle


Check the water filter ---high pressurehose must have bbackpressure to develop pressure so disconecting it wont acheive ,much ,if you have agood water supply ,oil in the pump--- adjust pressure by srewing the brass fitting that the pressure hose atta ... Pressure Washers

Using a Bosch 1600W Pressure washer Aquatak 110 plus Was adjusting the twist pressure sleeve to get HIGH pressure and water supply stopped and sleeve seems fixed/seized. I turned power ON and OFF and turned water tap ON and OFF but still no water coming out of the nozzle. What do I do now?


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0896 seconds