Having problems with your Bosch 23 in. SHU3307UC Built-in Dishwasher ?

I have a Bosch SHU3307. Looking in the Owners manual I see an"extra tall sprinkler head" that plugs the opening at the back of the unit when the upper rack is removed. I'm looking for this sprinkler head. any idea on a part number, where to order, etc.


Answers :

Repair Help & Product Troubleshooting for Bosch 23 in. SHU3307UC Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Bosch SHU3307. Looking in the Owners manual I see an"extra tall sprinkler head" that plugs the opening at the back of the unit when the upper rack is removed. I'm looking for this sprinkler head. any idea on a part number, where to order, etc.


... Bosch 23 in. SHU3307UC Built-in Dishwasher

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

I am looking for a lower dishwsher rack for a Kenmore ultrawash stock #15825 model number: 655.15825691 any ideas where to get one. Thanks


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

I need the upper and lower rack rollers replaced but do not know the part numbers. I am looking for a parts diagram on the internet but have been unable to find one. GE Nautilus, Model GSD2200G00CC


This link, provided by www.repairclinic.com shows what you need.\015\012\015\012 ... GE Nautilus 24" Built-in Dishwasher

Top rack not coming clean. It looks like the water pipe that carries water up to the upper spray nozzles has 2 big holes in it. One I can see to recieve the top rack nozzle when the rack is slide into place, but should the other one be covered to prevent all the water from dumping out before getting to the upper nozzles?


... Jenn-Air JDB3200AWS Dishwasher

Collapsable dish rack in upper rack of maytag dishwasher


... Dishwashers

Are the top rack adjusters on the Whirlpool GU2400XTP dishwasher an owner-serviceable item? Do most Whirlpool parts stores sell the top rack adjusters for the Adjustable 2-position top rack? My dishwasher is five years old and one of the adjusters has broken. The two-position rack seems like a good idea but the plastic part doesn't look like it was built for high-temperature durability.


... Whirlpool GU2400XTP Built-in Dishwasher

I have a Fagor/Edesa dishwasher 6 years old and need new plate racks for top and bottom. Model no is VES-032S but if this model is no longer made the sizes of the racks are; Upper rack depth 470mm by width 520mm; lower rack depth 505 x width 517mm. Look forward to hearing from you. my e mail is [email protected]


... Dishwashers

I have a BOSCH SHU5312UC/U06 dishwasher ... the upper wire rack is rusted and falling apart. We want to order a new rack and install, but I can't figure out how to remove the end caps on the arms holding the rack in place. Can you help me?


... Bosch Dishwashers

Upper and lower racks of Beaumark dishwasher purchased in mid-1990s (model and serial number available) need replacing. Coating on metal racks has worn away and resulting rust is getting on dishes. Replacement racks (new) cost more than the dishwasher itself (figure that!). Can anybody help out with a suggestion?


... Dishwashers

I am not happy with the racks in my new Bosch dishwasher! The bottom rack is not right! The silverware basket is in the back right corner and the silverware catches on the seal on door and it is hard to get to. The tongs are two close together and point the wrong way? The upper rack's tongs are also to close together also. I don't seem to be able to get larger dishes in with these tongs in the way. Having never used the mdl 9000359119 Rev B I had no idea. Buying a Bosch ment quality to me


... Bosch Dishwashers

I have broken parts on my top rack and I do not know which parts to order. It will not roll on the rack and it looks like the sides on the basket are broken. When you try to slid the rack out the front falls. Very disappointed in the material of the adjustable.


... KitchenAid KUDS30IXBL Builtin Dishwasher

GLD5900N00WW I have noticed that my dishes in the upper racks are not getting clean. I emptied the dishwasher and ran it without dishes. I noticed (when I opened the door mid cycle) that the bottom arm is rotating but the upper arm does not appear to be rotating. Any ideas why this is and how I might be able to fix it?


You need to remove the top wash arm and check for any blockages in the holes, clean them out and make sure the arm spins freely. ... Dishwashers

I am trying to locate an upper rack for an old KitchenAid dishwasher, Model KDS21, I thought I had found it with part number PS402141 which I found on Partselect.com, but they said it was discontinued. My next try was with repairclinic.com and they also said it was discontinued and suggested part number 9741982, That is how I found you.


... Maytag MDB3100 Dishwasher

I have a Danby dishwasher model 1802W-1. I ordered a new upper rack because the wheel broke. The old basket was accidentally thrown out before I could remove the upper spray assembly. Is there a kit replace? What parts would I need to replace?


... Dishwashers

My Kenmore Elite dishwasher 630.1630 9400 (possibly made by Bosch) has a bottom rack spray arm a top rack spray arm and a missing sprinkler on the outlet at top of unit (ceiling it the cavity was a room). What part number is it? Can I post a picture? thank you


... Dishwashers

Model number 66515632000 Kenmore Ultra wash with quite guard about 8 years old Washer stopped near end of rinse cylce, dishes look clean, water in washer did not drain and looks clean. All attempts to restart washer, or hit drain etc result in attempt to start and then it stops. sounds like trying to start a car with a very weak battery.


Unfortunately it sounds like you have one of two possibilities. A) You have something like a piece of glass or food ect. that has worked its way down into your pump and is tying up the impeller or pump as its trying to start. -To op ... Dishwashers

My Kenmore Dishwasher isn't cleaning the upper rack of dishes, and the spray arm isn't rotating. I have cleared debris from the screen. Where do I look next? The lower rack is operating perfectly.


... Kenmore 24 in. 15932 Built-in Dishwasher

Upper spray arm and tube assembly. This part fell off the back wall. Can not figure out how to get it to stay on again. Looks like it should clip in, but nothing to snap it in place. The part does not look brocken when compared to the part would order to replace. No info in the manual and their service department was no help, How do I fix this.


Hi,\012Those p[arts wear and even though the parts do not look broken they are not up to the specs. of a new part...\012That is not that hard to fix and you can easily buy the parts yourself online... ... Bosch 23 in. SHU 8805 Built-in Dishwasher

ON THE TOP OF THE DOOR IS A ROW OF LIGTHS THAT INDICATE YOUR SELECTION FOR WAS, DRY ETC.. THERE IS ALSO WHAT LOOKS LIKE THE NUMBER 3 INSIDE A BOX. THERE IS A LIGHT TOO AND IT'S STEADY GREEN. I CAN NOT CHANGE IT AND THE WASHER DOES NOT RUN??


... Jenn-Air 24 in. JDB1270AW Built-in Dishwasher

Just bought this dishwasher and the cap for the rinse aid is missing. Any idea what the part number would be so I could order it


I will need the model# to locate the correct part. ... Dishwashers

Food residue is being left on the dishes in the upper rack that was not on the dirty dish, particularly glasses and bowls. It looks like the pieces from the grinder that are circulating but not rinsing off.


Check your sprayer arm holes for food clogs. You can use a toothpic to clean them ... Amana 24 in. ADB1200AW Built-In Dishwasher

We have a scratch on the control panel (top of door) of our Bosch SHX43P15UC/60. Looking for an exploded view to get an idea of the part number. Where can I find an exploded view of this dishwasher?


... Bosch SHX43P1 Builtin Dishwasher

Ge monogram model zbd6880n00ss The wheels to the bottom rack fall off all of the time. I have no idea what happened to begin the cycle of them falling off daily, but I am wondering if I order new wheels and just snap them on, will that do the trick?


Yes it will. part numbers are wd12x10136 and wd12x10277. 8 of each and very inexpensive. Hope this helps. ... GE Monogram® ZBD6880NSS Stainless Steel Dishwasher

Problem: dishwasher (moel MDB6601AWW) will not run. The front panel has a light, between the "Delay 1-9" and "heated dry" buttons, and adjacent to small printed icon (looks like a tombstone with the number 3 inside). Last weekedn I shut off all the water in order to change a faucet, including the hot water feed to the washer. Now the fed to the washer is somewhat frozen -- I can only open it 1/8 turn. So, I wonder if my wife tried to run the machin with no water flow, and it shut itself dow


... Maytag 24 in. MDBH955AW Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1128 seconds