Having problems with your Bosch 23 in. SHU33A Built-In Dishwasher ?

I need to look at bosch SHU5312UC exploded viewe of the door

\015 Bosch SHU5312UC dischwasher. I am replacing the control module and I need an exploded view because two black "spacer like" parts fell out when I took the door apart\015

Answers :

Hello,
\015\012
\015\012I think I know the pieces you are referring to and you can only install them one way. I can direct you to searspartsdirect.com and if you enter your model number you should have access to several breakdown illustrations of your d/w however, I`m here to tell you, don`t sweat it. Most illustration`s I`ve seen don`t even show them either.
\015\012
\015\012Those two blocks ( which slide into the front of the hinge behind the door panel by the way ) can remain left out without any functional consequence to your dishwasher. In fact the regional training representative for north america used to joke with us techs how he had a collection of them from tossing them into his toolbox instead of putting them back in place. They do increase the structural support of the front panel, but unless you plan on moving it around frequently, I wouldn`t worry about it.
\015\012
\015\012If you are still concerned, post back with your email and I can send you a complete repair guide in "pdf" format for your dishwasher.
\015\012
\015\012Hope this was helpful to you. Thank you for coming to "fixya" and please let me know if I/we can assist you further in this matter. Please take a moment and rate the info I provided for you here today.
\015\012
\015\012Good luck.
\015\012
\015\012macmarkus :)
Repair Help & Product Troubleshooting for Bosch 23 in. SHU33A Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to look at bosch SHU5312UC exploded viewe of the door


Hello,\015\012\015\012I think I know the pieces you are referring to and you can only install them one way. I can direct you to searspartsdirect.com and if you enter your model number you should have access to se ... Bosch 23 in. SHU33A Built-In Dishwasher

We have a scratch on the control panel (top of door) of our Bosch SHX43P15UC/60. Looking for an exploded view to get an idea of the part number. Where can I find an exploded view of this dishwasher?


... Bosch SHX43P1 Builtin Dishwasher

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

Hello, My husband bumped into our Bosch dishwasher door when it was open. It won't close now, one side is about an inch higher than the other. Also the inside of the door (not the hinge) looks bent. What can we do? Can a repairman fix the door or do we need to get a new one?


THE DOOR NEEDS TO BE RESET IN ITS POSITION.THAT A REPAIR MAN CAN DO BEST YOU GET THE AXPERT IN TO ASSIST YOU.\015\012\015\012GOODLUCK.\015\012\015\012MOHAMED ... Bosch Dishwashers

Hi, we are trying to install our new Bosch dishwasher model: SMU68M05AU. I am surprised to see packing foam and flimsy edging across the top edge that meets up to the stainless steel door edge when its closed. I can not find detailed installation instructions. Is there not a strip that goes across the top to meet the door as the top looks very ugly? The dishwasher door protrudes from the under bench cupboard space so the top part is in view and exposed.


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Bosch Dishwashers

We have a Bosch Model SKT5102GB/07 and the problem is as follows; we load the dirty washing and start the washing process, the machine then goes through the full cycle of wash. Once finished you open the door and notice that the washing is still dirty and a large pool of water is laying in the bottom of the machine. We have had an independent engineer look at the machine and he has advised that the pump needs changing. Look forward to your reply, thank you. Regards Michael Ballard.


Replacement parts are available here\015\012http://www.repairclinic.com/SmartSearch/SmartSearch.aspx\015\012\015\012on the narrow ... Bosch Dishwashers

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

I need to remove the sprayer on my GE Profile Dishwasher model GSD4130Y70WW because it is clogged. I've got the exploded view, but I can't tell from looking how it comes apart. Suggestions, please? Thank you! Donna


Hi, Donna, W/D here.Most all of the washing arms either have a screw type cap, or they pull off. If you go to pull them off, hold your other hand on their attached points to lessen the strain.You can clean the tips by using a ... GE Profile 24 in. Built-In Dishwasher Dishwasher

Our Bosch dishwasher is 6 mths old. The soap dispense door will not open during any of the different cycles. We have a repair person scheduled to look at it in 10 days. In the mean time... when do we put the soap in? Beginning? Middle of cycle? Please don't tell me I need to wash them by hand! Thanks for your help.


After the first rinse would be ok ... Dishwashers

I have the parts to repair door on an ADL347 Ignis Dishwasher but need an exploded view to see how they fit, any help?


What is your model number is then we can get started then ... Dishwashers

Broken door hinge - need a replacement dishwasher but this one is out of stock (bosch shv46c03uc) i need to find the bosch that will accept the same front panel as my old d/w


You can get the door here:http://www.repairclinic.com/Appliance-Parts?s=t-shv46c03uc-%3d%3dc226 ... Bosch Dishwashers

GSD4911X02SS leaks from the bottom. Opened the bottom cover to see where the leak is and it looks like it's leaking in two places. The leak is ont by the door. It looks like the leake is by the pump or motor dripping down. The diswasher still works, but the leak needs to be fixed. Also I have pictures if you need to see


... GE 24 in. GLD6200L Built-in Dishwasher

My bosch dishwasher door does not lock.its a bosch exxel model.the door closes but does not lock.the latch looks like its not sticking out as far as it should so its not catching the slot on the door.any help would be great.


... Bosch Dishwashers

Bosch dishwasher,exploded parts view,SHU33A05UC/46


... Bosch 23 in. SHU33A Built-In Dishwasher

I have a SHU8805UC/14 BOSCH DW and need to replace the inner door panel. I ordered the part, but there are no instructions on how to replace the door panel. I want to make sure I do it correctly, so


Go on line with Bosh company and look up dishwashers giving your model. Request technical assistance to install the panel... ... Bosch Dishwashers

Door interlock appears faulty on my whirlpool awm 321 . It wont allow program start when door closes . Needs a lot of coaxing , banging with palm of hand , knee etc .Door itself appears fine , catch looks ok , finishes and runs ok once we finaly get it started .Hve tried pressing the interlock slider in with a pencil , but cannot succeed in pushing the contacts into place and starting the program . HELP PLEASE


Only solution is to replace the interlock - it is just held in by 2 screws ... Dishwashers

Need a service/repair manual for a Bosch SGS0905AU/01. The machine is completely dead (no display) after a burnt smell came from it. On the pump motor is a broken/melted brown attachment with a broken ceramic(?) disc inside which looks like some type of capacitor. I really need to know what this is/was so I can replace it. Also, need to know whether there is another fuse somewhere in the machine as that has most likely blown as well. TIA


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012While I can provide a overall Bosch service manual if you post an email address, Based on your description I'd say the issue actually with the motor start relay and consiquently the control...as ... Bosch Dishwashers

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

I need an exploded view of whirlpool dishwasher


Something in the heater circuit \015\012-or-\015\012the motor has died. \015\012I found the front bearing on mine was toast. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My Bosch dishwasher has had a problem since we had it installed. It smells like garbage after sitting for a few hours. This problem is there whether it has been run or not. Water is always standing in the large drain tube under the "filter" and it doesn't look clean. I contacted Bosch by phone as soon as this was discovered - in a matter of days after purchase - and was told by a rather haughty service person to leave the dishwasher door open. Not a practical suggestion even if it didn't sm


Was the drain tube that hooks into the sink drain passed over the partition between the sink area and washer area or through a low-level hole. If through a low-level hole, try rerouting the tube over the partition. This forms a 'trap area' to isolate ... Bosch 24 in. SHU43 Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

I need to replace right door spring on kenmore diswasher mod #363.15324100. Part diagram shows part #wd03x10006 and wd03x10007 total lenth of the part I need is 5.50 unstretched. It look like part #wd03x10006. Can you confirm it?


... Kenmore 15121 Built-in Dishwasher

Do4esnt clean My Bosch SHX33a05 dishwasher has a problem. It fills and drains well but nothing gets clean. It appears as if the arms are not rotating but the inside is wet when I look inside. I have put a bit on catsup on the inside door and even that is on at the end of the cycle. I have opend and clodes the door multiple times during the cycle and bot arms appear to not be rotating. Nothing is blocking them. I have clean the microfilter, the drain screen and open up the impeller to make sure t


... Integra SHX33 Dishwasher

I fell on to the dishwasher door when it was open and now the door will not close properly,therefore can't use it. hinge seems to be bent need to see what the hinge looks like before attempting repair


You'll have to pull the dishwasher out from under the cabinet to get to them. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1384 seconds