Having problems with your Bosch 23 in. SHU 8805 Built-in Dishwasher ?

What do i do if the spinning washer arms are not moving?


Answers :

Repair Help & Product Troubleshooting for Bosch 23 in. SHU 8805 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Frigidaire dishwasher, FDB-1100RHC, that is not cleaning dishes. My fiance cleaned the trap at the bottom of the washer, removing both the small basket and the larger mesh grid. After replacing both, the washer doesn't seem to have enough water pressure to spin the lower and/or upper arms. If I interrupt a cycle and open the door, water is dribbling out of the upper arms, but they are not rotating and do not move from whatever position you place them in. Both arms are completely uno


Hello :)don't feel bad, I run into this kind of problem at least once a week.\015\012It does sound like the pressure isn't there so you're not getting water to the upper spray arm. What you need to do is take the pump apart, which i ... Frigidaire Dishwashers

What do i do if the spinning washer arms are not moving?


... Bosch 23 in. SHU 8805 Built-in Dishwasher

Top spray arm won't spin. No clogs. Water runs fine. Arm just won't spin. Will spin freely if I move it


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Kenmore Dishwashers

I have a maytag MDB2200AWE DISHWASHER I THINK ITS A 1999 THE BOTTOM ARM DOES NOT SPIN FREELY IT GOES FOR ABOUT 1/2 A REVOLUTION THEN STOPS, WHEN I MOVE IT BY HAND IT MOVES FREELY FOR ABOUT HALF A TURN THEN GETS HARD TO MOVE, HOW DO I FIX THIS ,AND HOW DO I GET THE ARM OFF TO SEE IF ANYTHING IS JAMMING IT UP


... Maytag Dishwashers

I have a Whirlpool GU2455.... dishwasher. Top spray arm is not spinning. Lower arm appears to be moving but slowly. Dishes on the top rack do not get cleaned. They are wetted, but the arm doesn't appear to be moving to allow all of the dishes to be cleaned.


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU2400XTP Built-in Dishwasher

Not draining and washer arm not spinning


Have you cleaned the drain filter? The symptoms you describe indicate that the filter are totally clogged. \015\012\015\012Cleaning filters should be done every other week to maintain good\015\012function in dishwashers, it is not uncommo ... Hotpoint 24 in. HDA2130Z Built-in Dishwasher

Frigidaire Ultra Quiet 3 dishwasher- top arm does not seem to be getting enough water pressure to spin. Looked at hose on outside of washer - does not appear to be clogged - the bottom arm spins great.


If two pumps are driving the arms, check the pump connected to thelow pressure arm. ... Frigidaire Dishwashers

My 14 yr old Magic Chef Model DU4K seems to be leaking (it is dripping into the basement just under where the dishwasher is located). it started when the arm at the bottom of the dishwasher did not seem to be moving so my husband took off the bottom "grill" to see if maybe there was something under there preventing it from spinning. It started to leak when he put it all back together (the bottom arm is still not spinning)


Being 14 years old I dought if spares are still available for this machine personally at 14 I would rather replace the unit if you are not in a possition to replace it you could advise from your local appliance repairs as to weather parts are availab ... Dishwashers

3 PROBLEMS 1. SPRAYER ARM LIGHT ON BUT WHEN I OPEN THE DISHWASHER THERE IS NOTHING BLOCKING THE ARM FROM SPINNING. 2. SALT LIGHT IS ALWAYS ON. HOW DO I ADD SALT. 3. I NEED NEW TRIM FOR THE OUTSIDE OF THE WASHER. WHERE CAN I GET THAT. OH ONE MORE 4. IS THERE A WAY TO HAVE THE WASHER SERVICED SO I KNOW IT'S IN GOOD WORKING ORDER. LIKE A CAR TUNE UP? WHO DO I CALL? THANKS!


This is just to let you know that the internal water softener needs water-softener salt. If you do not use the softener (I do not at my house) then the light serves as a convenient on/off light.The other issues you have can ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

The upper and lower spinning arms in the washer do not appear to spin at all. Water comes out of the lower arm but not forcfully at all.Not cleasning dishes and leaving soap residue all over.


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Asko D1876 Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Two problems: the water pressure in the arms is low. If you pop the door, arms are not spinning as it should. Each time you start and stop, the arms move a tiny bit. Have cleaned the filters and the spray arms completely. Also, detergent door no longer pops open.


Hello, Welcome to fixya.\015\012 \015\012I just came ... Bosch SHU3306UC Built-in Dishwasher

How do i turn on the water for my washer?I just moved in to my place, tried to start the washer but it started spinning before any water came in. I think the water must be switched off. There are two taps opening pipes going into the washer, a blue and a white one. Should I try opening one of these?


Yes open both of them they are the feed lines for the washer ... Dishwashers

Maytag MDB-3 will not spin washer arms


... Maytag MDB6769AW Builtin Dishwasher

Washer arms do not spin only squirt water


The recirculating pump is clogged. Take out the bottom rack and remove the sprayer. You'll see some goofy screws...remove them. I wish I new the model, but this is pretty self explanatory. If there's a tube that runs up the back of the dishwasher ... Dishwashers

The top washer arm won't spin - Kenmore Elite 16273 dishwasher


It's probably clogged. Pull it off and check for hunks of food. ... Kenmore 24 in. 16273 Built-in Dishwasher

Our Maytag dishwasher arms in the middle and bottom of the washer won't spin during wash cycle? What do we do to fix this problem? The washer has been stored for 1 year. Thank you.


Does it sound like the motor is runnig??? just no water circulating??? if so sounds like a bad impeller/ seal kit. ... Dishwashers

Have a Maytag model DWC7400AAW dishwasher and the pressure from the wash arms is weak. hardly enough to make the arms spin. I restricked the water flow through the center washer post and it's at lease spraying further up and ratating slowly. Would this most probably be the impeller? What would you suggest?


... Maytag Dishwashers

Top wash arm does NOT spin, but is not blocked or hard to move by hand. Does this run off water pressure? Whatshould Itry next. I have already removed the filters and cleraned around the pump. The bottom wash arm works great.


Remove the dishwasher from the cabinet and look at the hose going up to the top. Make sure it isn't clogged and that there is nothing in the port where it comes out of the pump. The top arm is powered by water pressure from the pump. ... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

My dishwasher makes a banging sound, I've checked the arm & even when the washers is empty it still makes that sound. NOW I've ALSO got a sound like a "clothes washer in spin cycle mode" also in the wash mode of my dishwasher. Do I need a service call or should I just replace it since it seems to be falling apart....it's only 2 yrs with min use


Hi,This is quite a common problem. I would be able to help you, if you could provide few more details. When did you hear the banging noise i.e when filling, start of the cycle, mid cycle or it is always there?Thanks!! ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Dishwasher fills with water, but spray arms don't spray water or spin. As the cycle moves forward, water is eventaully pumped out (so the pump is working). i've selected different cycles with the knob on the front of the machine but they all work the same.... no swishing with the spray arms. When the cancel button is pushed, the water is pumped out... as it should. Thanks for the help.


... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

I have a kitchen aid dishwasher that is not dispursing the water enough to clean. I have cleaned the entire unit with commercial cleaners and have added vinegar to the washer without dishes. And still it seems to not clean. It fills properly but the washer arms do not spin with any power.


You need to remove the wash arms by turning the nut in the centre of the arm and remove,then unblock the holes that are in the arms and replace them,test if the arms now turn and you can see a differance then also check there is salt in the salt disp ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have an asko D3450 dishwasher. Washer makes buzzing/humming noise at start of cycle and then randomly through cycle. I checked the sump and pump appears to be clean and impeller spins freely. The cycle seems to work ok. Water is pumping out ok. If you open the door to stop the cycle, the buzzing will continue for a few minutes then stop. If the cycle is restart, the buzzing starts again. The vibrations seem to originate from under the lower spin arm.


If the sound is a bussing - it is the capacitor mounted to the pump. It is failing.Shown here (big white cylinder on right of pic).. ... Asko 24 in. D3450 Dishwasher

I have a frigidaire dishwasher 4000 series aqua surge with speed clean. The small spray arm on the ceiling of the washer came off. I found it sitting on top of some cups in the top basket. There is a loose part inside the retainer in the ceiling that moves back into the retainer when I try to put the spray arm back on. How do I fix this and how do I get the top basket out to work on it?


The top arm snaps into place. Simply unscrew the retaining clip from the ceiling of the washer. Inside of there, you will find a small white plastic clip. Make sure the two prongs are pointed down and poking out through the hole in the bottom of the ... Frigidaire PLD4555RFC Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0996 seconds