Having problems with your Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher ?

I got this bosch sgs43C12 dishwasher and have the problem that it doesn't fit in our new kitchen(it's to high). i know it is meant as a free-standing dishwasher but is there a possibility to remove the top to get it into the new kitchen? or won't the dishwasher function without the top? many thanks for any help martin


Answers :

THE LOWER LEGS CAN BE ADJUSTED ON THE LEFT ,RIGHT AND MIDDLE
Repair Help & Product Troubleshooting for Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I got this bosch sgs43C12 dishwasher and have the problem that it doesn't fit in our new kitchen(it's to high). i know it is meant as a free-standing dishwasher but is there a possibility to remove the top to get it into the new kitchen? or won't the dishwasher function without the top? many thanks for any help martin


THE LOWER LEGS CAN BE ADJUSTED ON THE LEFT ,RIGHT AND MIDDLE ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Remove the top from free-standing-dishwasher bosch sgs43c12


Hello martin - yes you can remove the top. And no, it will not harm the dishwasher funcion. ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Hello, My GE dishwasher stopped draining. Model Number: VSD2304JOOWW I emptied out the dishwasher of the liquid, removed the cover and checked the filter. (Didn't look bad.) Checked the drain pipe under the sink and there was a little debris (slime) but very minimal. The garbage disposal was installed at the same time as the dishwasher 3 years ago (brand new place). What else could it be? Any advice would be helpful as my new home seems to be falling apart and it is getting pretty e


Drain pump either disconnected or jambed ... GE Profile PDW8400J Built-in Dishwasher

I cant get me dishwasher to start i have tested the overflow switch and its fine i have also tested the water inlet valve and its is fine. but it will not fill the dishwasher with water i have even removed the hose to see if there was any blockage in the line come out from the what inlet valve. the button light up on dishwasher and the cycles work a long with the start button, i have left the door open to see if the door senor could possibly bee an issue and it tested good and function correctly


Hi.If there is no voltage to valve, then parts that can be responsible are only and all the following:Overfill switch or overfill device.Door switch.Electronic control Wiring.If the overfill switc ... Dishwashers

Unable to fit new door panel to front of dishwasher. Have removed old one with great difficulty and now cannot figure out how to get new one on. Have placed the fittings from old door onto new one in exactly the same place but am baffled as to how it attaches. HELP!


Im not sure what new panel you are trying. But if you can still get the old one back on, you can get different panels, color, and designs from applianceart.com. they also custom cut stainless panels to fit or they have a stainless foil that can cov ... Whirlpool GU2400XTP Built-in Dishwasher

I have Kitchen Aid Dishwasher Model # KUDMOITJBLO. We began having trouble with the top rack coming out of the brackets on the upper rack track. Kitchen Aid sent me 4 parts # 8268785. The problem is that the brackets that they sent have wheels on them. I don't know how to get them into the track. A call to Kitchen Aid got me no where. They claimed that they don't sell parts so therefore they could not help me (with the parts that they sold me). The situation has gotten progressively worse.


I removed the tracks from inside the dishwasher.  Then I was able to carefully remove the endcaps (something I had not been able to do previously) carefully.  The existing broken wheels slid out and I slid two new brackets into each track. ... Dishwashers

Just installed a new Hot Point dishwasher.Mo #HDA2100N10WW. I AM HAVING PROBLEMS GETTING THE WATER TO DRAIN OUT. THE OLD MACHINE WOULD DRAIN FINE. IS IT POSSIBLE I FORGOT TO REMOVE SOMETHING ON NEW DISHWASHER?


Remove the drain hose from the sink and see if it will drain into a pail, if not then you have a problem with the machine that is covered under warranty ... Dishwashers

I have a new tall tub GE dishwasher Model # GLD6964RSS. I removed a blue plastic strip located on the top rack because I thought it was packing material. Now I can't get to back on and oviously it was meant to hold the prongs upright. Can you tell me how to get it back on? Peggy Savell 3390 Black Ave. Simi Valley CA 93063 805/527-2120


Hello Peggy. I searched high and low for a diagram to send to you without success. This is what I recommend. Go back to the store where you purchased this dishwasher, armed with your digital camera or cell phone camera. Find your dishwasher on di ... GE Dishwashers

Upper spray arm is not turning and I don't think water is coming out. Dishes on top are not coming clean. Dishes on bottom are clean (as clean as they get with this dishwasher). How do I remove upper spray arm. Also I'm not sure how to remove lower dish rack to access upper spray arm. Any help appreicated. Kitchenaid model KUDP01FLSS5 Chris


Hi Chris,It sounds to me like a restriction in the pump. I put together some information here on cleaning it out. If you try these please give me some feedback as to if they help or not.Thanks! ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

Dishes in the upper rack no longer get cleaned. I've been using this dishwasher since 2004 (purchased new), and have not changed the way I loaded the dishes or the detergent. I called the Kitchen Aid help line, and the rep simply read the owner's manual to me (e.g., stand a glass of vinegar in the dishwasher and run a cycle), which did not address the problem. Any idea what I need to do? Thank you!


It may be full of crud under screen. Remove lower spray arm, tower up to top, covers and you will see where the entrance to the impeller is full of stuff. ... KitchenAid Dishwashers

We have a Kitchen Aid dishwasher model number KUDK03CTSS3. It's only about 3 years old, but the dishes on the top rack do not get clean. We thought maybe it was water not coming out the top, or food stuck somewhere, but do not know how to fix it. Any help would be greatly appreciated.


Had a simular problem, used product called dishwasher magic to clean it well and that took care of it. I got it @ walmart in the diswasher detergent area. Also be sure you are loading according to the manual. I now use lemi shine in every load fo ... Dishwashers

MY KITCHEN AID DISHWASHER MODEL #KUDS25SH CHIKD LOCK IS ON AND WONT GET CLEARED. I TRIED HOLDING THE ENERGY SAVER DRY BUTTON FOR FOUR SECONDS AS SAID IN THE TROUBLESHOOTING SECTION BUT DOES NOT CLEAR. PLEASE HELP I CANT AFFORD A NEW DISHWASHE


Try turning off the breaker to the Dishwasher...See if it resets ...Good luck.,.. ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

Dishwasher model: se6 tie1 Fitted under kitchen work-top. Problem: After setting a program & switching on & closing door ? there is a normal sound from within but if door is opened there is no evidence of water being pumped in. I previously cleared food debris from the drainage pump area (including under the pump cover), checked the spray arms and checked the water supply was getting as far as the long in-take pipe. As it seems problematic to remove the (screwed in) dishwasher, I have not che


... Dishwashers

I have a maytag jetclean quiet pack dishwasher. The top dishes are not getting clean. The glasses always have sandy residue in them and sometimes orange juice etc at the bottom of the glass isn't removed. I have added jet dry, this doesnt work. I ran the rinse cycle today and opened it up during the cycle and I didn't see the middle pop up spin thing in the middle of the bottom shelf doing anything. It should be spraying during the rinse cycle correct? Thanks for your help


Possible that the pump is not working well to spray and inject with good pressure so that the dishes are spot clean.\012You will need to simulate the washer without any dish and checck the performance to understand the fault areas.\012The ... Maytag Dishwashers

I am trying to replace the soap dispenser on my Kitchen Aid dishwasher. I have removed the toe plate and 10 screws on the inside and cannot get the cover off. HELP!!


As I look at the pictoral, it seems there are twelve screws that hold the inner door to the outer door. Youmust remove these and then separate the door parts. Then you will see the screws that hold the dispenser in place from inside the door. ... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

Hi, we have an aquarius hotpoint df61 and it goes through the cycle but does not drain out the last few inches of water and the wash is not as good as it should be, have unscrewed the plastic bit under the filter thing to see if there is a blockage there but nothing, have now taken off the top and side panel to try and get to the pump, currently on it's back but hard to access underneath and not sure how to remove the solid bottom of the dishwasher..please help!


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher I am getting a run around with getting my LG dishwasher fixed properly. We had a tech more than once come in and look at our dishwasher. It has not been fixed and never dried the dishes properly. It is now leaking and going to a "del" level when we attempt to wash the dishes. It is also leaking on our fairly new tiled floor and under our new kitchen cabinet. Your tech stated the dishwasher was not installed properly. The installation dept , Francine stated it is not their problem


Not sure what you mean by a "del" level, but as far a drying issues:\015\012\015\012LG chose to use a very energy efficient drying method which relies on the residual heat of the dishes to help dry them rather than many manufacturer ... LG LDF6810 Built-in Dishwasher

Just had a Bosch dishwasher installed in my new kitchen. The plumber who installed it ran it and it worked. Now we cannot get it to run. We have tried everything. Restarted several times, turned the circuit breaker off and on, changed the cycle and nothing works. The light comes on but it does not get water or run. What are we doing wrong. The dishwasher is brand new out of box but we bought it 4 years ago and remodeling was delayed.


Do you have the manual?What is the exact model #?Thanks~! ... Dishwashers

Just had a Bosch dishwasher installed in my new kitchen. The plumber who installed it ran it and it worked. Now we cannot get it to run. We have tried everything. Restarted several times, turned the circuit breaker off and on, changed the cycle and nothing works. The light comes on but it does not get water or run. What are we doing wrong. The dishwasher is brand new out of box but we bought it 4 years ago and remodeling was delayed. Model #SHU5314UC/U06 FD#8001


Test the door switch. It can be faulty or misaligned. You can also check the back of the unit and/or remove the rear panel and take a look at the thermal fuse. It may be bad not allowing enough current flow to operate the machine. ... Bosch SHU5316UC Dishwasher

TOP ARM HANGING DOWN-Dishwasher's working fine, problem is that the wash arm/spray thing at top is lower than it used to be, we only noticed because when pulling out the top rack the top arm/spray thing at top gets hit by the rack. Work around has been lifting rack up at angle to get past this, but everyone at some point forgets to do this and we are worried eventually something will break. HELP???


... Dishwashers

Dishes all cloudy and spotty. Maytag Intellisense plus 1996 dishwasher. I have real hard water that leave white calcium build up. I can remove and clean all of the lower spray arms and filter. How do I remove top spray arm to remand remove deposits? The motor sounds good, hot water, fill ok. On the inside top of center of arm where it meets the center input connection there is gunk to remove. How do I get to it? remove arm? thanks


The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your d ... Danby 22 in. DDW399 Free-standing Dishwasher

Our Whirlpool dishwasher, DU1145XTPBA, has almost quit cleaning the dishes. It started with dishes on the top rack. My husband was told by rep to replace the top unit. That did not help at all. Now the bottom dishes are almost as dirty and gritty as the top rack. This dishwasher is too new to have to be replaced and we've already spent $50 on the top rack. Is there anything else to check at this point?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Hello I have a built in DCS dishwasher - width 24" heigh 35". It started smoking out the front and the repair man said it needs a new control board. Is that possible or should I buy a new one. IT is not a dishdrawer its a full dishwasher. the top rack is also broken. If I need to buy a new one - where from - new jersey area


Http://www.thefind.com/appliances/browse-dcs-single-dishwasheryou can purchase online from here... ... Dishwashers

Whirlpool dishwasher top arm does not turn. Top rack dishes are not getting clean but bottom dishes are. Not all detergent is getting out either. I tested to see if top arm moved and it didn't. Please help.


Hi,\012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried in vainto clean the things... \012Bought new spray arms online and installed them inminutes...now the thing works ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2265 seconds