Having problems with your Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher ?

Door Problem When we open the dishwasher the door drops down and bounces. Is it possible to limit the speed of the fall of the door? Many thanks Chris


Answers :

There are set springs for the adjustment of the doors on the Bosch dishwashers. they are colour coded for different applications. They are accessed by laying the machine on its back and pulling the springs out of the base. first you will need to check that the nylon lines which attach the springs to the lower part of the door mechanisms are in place and this can also be done while the machine is on its back. or by first removing the side panels to access the door hinge mechanisms. \015\012\015\012If you have a custom cabinet panel on your machine it may be too heavy for the springs and new springs will have to be installed.
Repair Help & Product Troubleshooting for Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Door Problem When we open the dishwasher the door drops down and bounces. Is it possible to limit the speed of the fall of the door? Many thanks Chris


There are set springs for the adjustment of the doors on the Bosch dishwashers. they are colour coded for different applications. They are accessed by laying the machine on its back and pulling the springs out of the base. first you will need to chec ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Our maytag dishwasher has been a perpetual problem. The door hs been falling apart for along time. We babied it and tried to get it to last as long as possible. We bought an extended warranty last fall. It was not cheap. Recently we contacted a service center concerning the problem because we had not been able to use the washer. Maytag refused to repair or honor the extended warranty. They blamed our abuse on the problem. They have no proof. We have tried to keep good care of it. It ju


... Dishwashers

My dishwasher works fine even though it's a few years old. The problem I have is with the door. Itused to open nice and gently , but since last week the door falls open .I skinned my shins several


Most likely one or more of the door balance springs has broken or come out of its mount... ... Whirlpool Dishwashers

Have problem with door on Frigidaire Electolux dishwasher. Door "falls open" rather than eases open.


There is a spring that connects to the side of the door (both right and left) than connects to the holes on the bottom of the dishwasher frame. These springs have either fallen off or broken. To see the area where they connect you will need to remo ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

I have a KitchenAid diswasher Model KUDSO1FLWH1. Problem: When Iopen the door, it falls down. It does not feel like there are any springs holding it in place any more. My wife opened it tonight and the door fell on her foot..hard. Can this be repaired...if so, do you know the part number and where I can purchase it on-line? Thank you, Bill


Hi,\015\012Go to this page and look down part way for the door spring... that is what probably broke.. ... KitchenAid KUDM01FK Dishwasher

A spring or something has broken in the door of my kitchenaid dishwasher. Now the door is extremely heavy and falls to the ground upon opening. How can I fix this problem? Thank you!


Hello, Welcome to FixYa.While I don`t have diagram or illustration I can give some insight because this is actually very common.It is a fairly minor procedure to replace it/them. Slide the entire unit out from the cabinet a co ... KitchenAid Dishwashers

Problem with door hinge. Door locks but falls to fully open position when not locked rather than staying ajar 6 inches. Dishwasher circa 10 years old - " Orbital System"


Look for a broken spring at the hinges. May need to remove the inner door panel. ... Dishwashers

We have the same problem. At first, we were getting a horrible detergent film on everything. We thought that was because the detergent cup wasn't opening or the water was too hard or not hot enough. We kicked up the rinse agent as high as possible, switched to a liquid detergent, and only placed shorter items towards the door. The cup still wouldn't open consistently and our dishes still needed to be re-cleaned. We stopped closing the cup. No change. Why would liquid detergent leave a powder fil


You dont need a new dishwasher. it is your water that is causing the film and residue. go to www.dishwasherfilter.com. they have an awesome product that is affordable and g ... Dishwashers

I have a model # GLD2161SCB1 dishwasher. the door spring is not working, the door has no tension and just falls open. how do i fix this problem


... Frigidaire Dishwashers

GE Dishwasher detergent dispenser has hardened soap in it when cycle is done We, too, have the same problem. Ours is a GE Profile MAX - GSD6610K01CC. The basket is obviously not allowing the door to open fully, so I think it is intended to work this way. The question remains, though, why is there solidified powder remaining in the dishwasher after the complete dishwasher cycle has finished? Tabs work well, as the tab falls out, but all the powder doesn't seem to. Electrosol powder is less expen


... Dishwashers

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

I have washed and rewashed my dishes with no soap and my glasses have a horrible white film and any of my plastics now have white film almost as if the soap is not rinsing off. I have resorted to hand washing and some of the glasses seem to be etched with this white residue....difficult to remove. Please help! I have read possible heating element problems but I just ran the dishes thru a wash cycle with no soap and when I opened the door the heating element seems to be functioning fine -- all


Hi,The scum, film and white residue problems have started since the reduction of phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The heating element does not function; it use to. Also, the detergent dispenser door does not open during the wash cycle. So, how do I determine the cause of the problem - burnt out element, bad switch, etc? Are the issues possibly connected, or separate? Thanks in advance!


Hi,\015\012Probably two different problems....\015\012\015\012Dishwasher Repair Problem Detergent Cup does not O ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I have a Fisher and Paykel Nautilus DW920 dishwasher. However, the door to the detergent dispenser does not open reliably every load -- usually I have to open the dishwasher door about 20 minutes into the load and open the soap dispenser myself. The catch on the dispenser will have released, but the dispenser door will not have sprung open. I am not sure exactly what the problem is -- the soap dispenser door simply seems a bit stiff in its holster. Given a little nudge, it springs open fine. I h


... Dishwashers

The door release bar on our KitchenAid KUDV24SE is hanging loose and so the door won't open. According to the installation booklet, the dishwasher should be attached to the floor or countertop to prevent it falling over when the door is opened, so I can't pull it away from the counter for better access. How do I open the door from the front? Thanks.


Looks like a very tight spot to be in. Your best bet is to get the toe panel off (item 8) in ... KitchenAid 34 in. KUDV24SE Built-in Dishwasher

Close the Maytag dishwasher, cycle starts, but I noticed a leak! Dishwasher door can be opened by putting your fingers on the edge and pulling it open. Tried it again, door clicked, thought it was ok but still could open door with fingers. Emptied the washer, door locked. Put in a few dishes, same problem


Your problem appear to me like it come from your upper basket .\015\012pleas try 1st to ensure the basket goes inside\015\012untill the end it is important..\015\012 thank you ... GE Dishwashers

Hi i have a problem with a candy 122, the problem is the soap door will not open to allow the soap tablet out? have cleaned it all and made sure all the jets are clean and the soap door opens up when operated manually. any help would be great please


Please read your instruction manual. If you do not have download from this web:www.fitness.manualsonline.com or www. retrevo.comGod bless you ... Dishwashers

Heavy dishwasher door that falls open


They are called door springs and it has one on each side of the door,Your handy man husband will find it easy to reattach them or replace them if needed. ... Dishwashers

Door falls open


Without knowing the make and model of the dishwasher, it is hard to\015\012provide specifics. It is very rare for the hinge/spring to be\015\012repairable.\015\012\015\012Generally, the hinge and spring assembly needs to be replaced as a ... Dishwashers

Opened the door of a kenmore elite 66516493300 and heard a loud bang. Then the doo fell open hard. Now when I open the door it wants to fall straight down fast. I see no springs in the parts list but assume that something counterbalances the door. Do you know what's srong and can I fix it myself? Thank you, Peter M. Bonadio


Http://www.managemyhome.com/mmh/lis_pdf/INSTL/L0408224.pdf\015\012\015\012if you look on page 24 it shows the spring and how to adjus ... Dishwashers

GE Nautilus My dishwasher is approx. 6 years old. It has recently started having this problem. On the second cycle (the one where the little door inside opens and release the soap) does not want to work right. The door will open, but it is like there is no water spraying to spread it out. The soap (I've tried both liquid and powder) sticks and drys, running down the door and in the bottom of the tray. I have to open the machine and add the soap to the bottom of the machine if I want to get my di


Smoking from GE (Model:gsd3725f00bb) dishwasherWe moved in an old house, the dishwasher had been installed. but today we found smoking from the dishwasher and smells burned plastic. Could you have any resolution for me? or this problem is popul ... GE Nautilus 24" Built-in Dishwasher

I have a Zanussi ZSF 2420. Every other wash or so the door for the powder does not open. If I actually open the dishwasher to check, sometimes it opens then and the washing powder tab falls out. Sometimes I open the machine and the door is open, but the powder tab has not fallen into the machine. Any solutions to this?


... Zanussi 24 in. ZSF6120 Free-standing Dishwasher

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1423 seconds