Having problems with your Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher ?

My Bosch exxcel sgs45e08 is stuck on pre rinse setting. Have tried resetting/ off and on but still stuck. Any ideas?


Answers :

Please use the link

http://www.repairaction.co.uk/bosch

I think that your d/w is on the list of bosch appliance due a free of charge upgrade.
Repair Help & Product Troubleshooting for Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Bosch exxcel sgs45e08 is stuck on pre rinse setting. Have tried resetting/ off and on but still stuck. Any ideas?


Please use the linkhttp://www.repairaction.co.uk/boschI think that your d/w is on the list of bosch appliance due a free of charge upgrade. ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Dishwasher stuck on rinse cycle. Have three yo son who plays with buttons, but I've been unable to get washer to finish (rinse went for three hrs prior to me realizing it was still running). Tried the front panel buttons w/o effect other than able to turn unit off, but it resumes in rinse cycle. Turned power off to machine from circuit breaker ( w/ machine off) then restarted and still in rinse cycle. How do I reset?


... Miele G892SC SS Dishwasher

Maytag dishwasher MDB7609AWW2 all the lights come on properly hit the start key and will start for about 30 seconds and then shut off then will not start again. Thought it was in store demo mode so reset that still not working when pressing the start key. Any ideas already tried reseting with the circuit breaker.


... Maytag Dishwashers

The program seems to be stuck on draining and i have tried to reset it or turn off the appliance and turn it back on,but to no avail as the pump iis still running. Is there any other way to reset this model of dishwasher?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Unfortunately there is no such reset button however, dishwasher not draining properly or not draining at ... LG LDF6810 Built-in Dishwasher

My Ge profile Triton Dishwasher wont start when I lock it just keeps beeping and the" normal "light flashes there was something stuck in the turnstile and it stopped and beeped all night when I took it out it was left this way I have turned the power off and on and I still cant reset it any ideas it just wont reset


... GE Dishwashers

Kenmore dishwasher My dishwasher stopped in the rinse cycle and no longer appears to be getting power, although the breaker works and the plug it is connected to is still receiving power. Is there a reset button for the motor, or some other idea to try and fix this? Thank you for your assistance. Mark


Mark, you probabley blew the thermal fuse located on the main board. Easy fix. Part number 8269213. You can ohm it out to be sure. You have to remove the inner panel to get at the control board. The fuse sits on the top side and clips on. Two wires ... Kenmore 24 in. 16293 Built-in Dishwasher

GE Quiet Power 3 dishwasher stuck on rinse cycle. Pressing reset doesnt work, trying to start wash cycle doesnt do anything. Any ideas?


... GE Dishwashers

My Kenmore dishwasher has the lock-on light that is stuck in the ON (lit) position freezing any other action. I have tried cancelling it, shutting off the power and resetting it with the "Heated Dry - Normal-Heated Dry-Normal" pushing of the buttons with no success. Ideas?


I held the "Heated Dry" button down until the lock light went out. It may have been 10-15 seconds. All seems well now. ... Dishwashers

Bosch dishwasher is stuck on pre rinse, tried resetting, still wont let me change to any other programmes???plz help


... Bosch Dishwashers

I have a SE24T250 and the timer on the auto programme says 188 mins (it is usually around 120 mins) When the prog runs it doesn't finish and shows 1 minute to go and never gets to the drying or end of cycle part of the programme. Have tried the reset but it still shows 188 mins when complete. Any ideas?


... Siemens Dishwashers

Dishwasher says dishes are clean but is still stuck in cycle. tried resetting the breaker but no luck. the green light that goes on when clean is constantly flashing but dishwasher is non-responsive. any feedback would be appreciated! Thanks


Some dishwashers have some sort of float switch. They can stick , try rocking dish washer if stuck mid cycle, I would make sure the food collect grid at bottom is clear, try flushing machine through with an empty load now and then, you can buy stuff ... Kenmore Dishwashers

I have a Kenmore 665 ultra wash quiet guard 3. The red light at the start/resume button flahes continuosly. I have unplugged it and tried the four button reset. Neither works. The red light still flashes. Any ideas?


The /RESUME light flashing constantly means that there is either have a bad door switch or a touchpad failure.In some case the problem is a faulty control board.The control board cannot be returned.I suggest replacing control pad fi ... Kenmore 24 in. 15689 Built-in Dishwasher

Hi. I have hoover HFI 3015 dishwasher. Just went to put it on and all the lights are flashing with a constant alarm. Have checked inlet and outlet which seem okay. Have tried switching off at plug and it still wont reset. Any ideas? thanks


... Dishwashers

My Miele dishwasher (G 856 SC) is about 9 years old and has begun stopping in the washing cycle. The pump still drains the water when I reset but it no longer finishes the wash. Any ideas other than to replace the machine! I have tried restarting and cleaning the bottom large filter (both of which used to work) Thanks


... Miele G892SC SS Dishwasher

Bosch Dishwasher model : SHV4313GB/17 The machine won't switch off and the pump is still trying to drain water ( there is no water left in machine ) The cycle seems to have finished as it has made the beep sound as if it has finished. The dishwasher is still working even when you open the main door. Have tried to reset it but to no avail. Even after turning it off at the mains it still starts up again as if in mid cycle ! HELP PLEASE


I have a SHV. My sink drain backed up, and the water accumulating in the sink then migrated to the dishwasher, through the drain pipe, causing the dishwasher to fill up and, it turned out, overflow a little. When I turned on the dishwasher, the wat ... Dishwashers

Flashing lights My GE model # GHDA455L00CS Quiet Power a dishwasher's lights are flashing when I start it, will not reset or in-take water. I've tried unplugging it and restarting. Nothing. Tried removing door door screws and press down door latch. Still nothing. HELP!!!!!!! IT WILL NOT PROGRAM. IT HAS A FLASHING LIGHT. WE HAVE BOUGHT EVERYTHING BUT STILL DOES THE SAME THING


It mite be the circut board problem..just  re-soldered a few of the pins in it and things will be back in working order. ... GE Profile PDW8400J Built-in Dishwasher

KUDU03STSS2 The dishwasher won't start and you cannot select a cycle. Hiting cancel twice will turn a small steady light on in the time window were the spining light normally is before a cycle starts, at which time closing the door will drain the dishwasher. Tried using the reset combos: hot wash, heat dry, hot wash, heat dry - all lights came on but nothing reset. Also tried same sequence doubling the heat dry. Unpluged for ten minutes, still nothing. Can select rinse, but unit does not start,


... KitchenAid Dishwashers

Diplomat ADP8224 The thermostat on my dishwasher (Diplomat ADP8224) has tripped and requires resetting. This has been carried out by an engineer who seems to reset somewhere under the machine. I have tried to locate the reset but with no success. Any ideas where this is and how to carry out reset


... Bosch 24 in. SHU43 Built-in Dishwasher

I have a westinghouse SB916 dishwasher - 2 years old. It is not disssolving the powerball.When the cycle is finished the un dissolved powerball is still sitting in the open door. So I re run the cycle putting the powerball in the cutlery holder - sometimes that works sometimes it is still not fully dissolved. I have tried putting it straight into the cutlery holder but it still does not dissolve. Any ideas?


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Westinghouse Dishwashers

The dishwasher won't start, its stuck, pots/pan button is blinking, & the timer has (2)_ _ bars blinking. I tried to reset/pushed the start/resume button nothing happened. I pushed the cancel/drain button still nothing happened. I close the door tight..nothing. I check the trays if there something stuck inside..nothing. I unplug/replug the power cord nothing? my wife was using it when this got stuck about 3 weeks ago.


Did you hold the start/resume button for at least 3 seconds if this works the dishwasher will start ok but if there is a fault it will fail again best you contact your nearest service agent good luck ... Whirlpool GU2400XTP Built-in Dishwasher

Triton dishwasher soap dispenser is stuck. I've tried the reset button several times to no success. I can hear the motor "trying" and I try to assist (either direction) to no avail. any suggestion


... GE Tritonr XL GSD6260JCC Dishwasher

I have a ge dish washer model # gsd2000g00ww and it will continue to pump the water out when triing to fill for wash - i have checked for stuck float - seems to swith ok - i have tried to manually fill but still pumps water out and will not wash


Timer or control ... GE Profile PDW8060GSS Built-in Dishwasher

Model No KFID 60A Dishwasher I have tried to reset but only spraying .I have followed instructions to reset. Press start button for 2 seconds until light goes out. Leave to drain then start a new programme. Still only spraying.


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Tried resetting tried canceling,still will not wash


If the green clean light continues to come on and flash there is a failure in the heat circuit. I have put together some things to check. Take a look at this link and see if it helps. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Smeg diswasher model numbe4r DF612SDX. Just coming up for two years old, various codes re error messages. E2, E5, E8. We have taken off the front panel where the buttons are - nothing obvious. We have taken the bottom off and tried to locate a reset button, but can't find one. We have cleared all the filters inside and checked the water intake and the filter there. Out of ideas, can anybody else suggest what we can try?


Any signs or sounds on the machine you here when the problem occur? ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1145 seconds