Having problems with your Bosch 24 in. SGS65L02 Logixx Built-in Dishwasher ?

How to test Thermostat (4 contacts)

\015 I have a Bosch dishwasher SGS6312GB/12 which dosen't heat up the water. I've checked the Hetare element which has a resistance of c.23ohms. The NTC Thermostat (4 contacts) microswitch breaks when I put it in hot water and makes when it cools down, there are how ever two other contacts. What do they do and how do I test them . They both give open circuit readings when tested with the other contacts\015

Answers :

Repair Help & Product Troubleshooting for Bosch 24 in. SGS65L02 Logixx Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to test Thermostat (4 contacts)

... Bosch 24 in. SGS65L02 Logixx Built-in Dishwasher

Ice maker cannot eject cubes. I took off the front cover and found several contact points for checking the motor, water valve, thermostat, mold heater. There is also a line voltage and neutral contact. Are these contacts live only during certain parts of the cycle? I suspect the heater isnt working to loosen the cubes so they cant be ejected. The motor sounds lilke its running but the ejector is not moving nor is the Gear on the front of the unit. Can someone give me a full description of this t

I usually replace icemakers as a unit. It sounds like the mold heater is out. The system cycles like this: Fill, freeze, mold heat, eject, and start over. The mold heater not working will prevent ejection. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Dishwasher thermostat I am having a problem with my dishwasher as its not cleaning properly and not drying at all,am getting error code e3. I suspect the thermostat is faulty as have tested the heating element,I'm wondering though where is the thermostat fitted in this machine???

Usually on the bottom of the tub ... Dishwashers

I have a Beko DE3542FS dishwasher which has stopped heating the water. I know the heater element is ok because I have had it tested. I was wondering if the thermostat was faulty if this would account for it not heating. The element has had 240v applied and becomes hot. So my reasoning is that it is either the thermostat or the programmer. Any suggestions?

... Dishwashers

Hoover d820 dishwasher water not getting hot heating element tests ok where is thermostat and how do i test

... Dishwashers

Hi I have a Zanussi ZDF501 dishwasher that stopped heating up intermittently. It got worse and I fitted a new heater and all was ok for a few months. Then the intermittent failure started again. Note that I tested the old heater and it is actually OK without a short circuit so I don't think it was the problem adn can be re-used. Could it be the thermostat or heat sensor? I am concerned it might be the PCB since the failure was intermittent. Thanks Dave

In my case, although the solder joints on the relay looked poor, improving them didn't help. I had to replace the relay. Fortunately, Maplin stock a compatible one, JM67X for 1.99. See ... Zanussi Dishwashers

Kenmore Dishwasher Model 665.15912001 Heating element doesn't seem to be heating. Wash cycles are loooooong and the drying cycle doesn't exist. Easy fix or buy a new dishwasher? I haven't tested anything yet. Should I start with the thermostat or the element itself?

Hi. i would test the element first. this will be the likely issue.First, open the doorand look into the tub and locate the heating element (if it is covered, remove the lower dish rack and cover). The heating element has two termina ... Dishwashers

D1796 thermostat test - Asko D1796FI Built-in Dishwasher

... Asko D1796FI Built-in Dishwasher

My Miele G 671 SC-1-2 isn't heating the water as it should. Everything else seems to work correctly. I feel it is either the heating element or the the thermostat that is the problem but don't know how to reach them to test them.

... Dishwashers

Thermostat location on a ASKO D1876 dishwasher. How to test it and or remove and replace it.

... Asko D1876 Dishwasher

We have a hotpoint aqaurius dishwasher df23n. When put on wash 4, the timer stops half way through and has to be helped. When the programme then continues through the rinse cycle, it stops half way through. I have tested the water heater and thermostat electrically and they seem ok. Is there anyting else that stops the timer at these positions? The timer knob is free to turn and is not jamming? Steve B

... Hotpoint Dishwashers

We have a Tricity Bendix TDF 221 dishwasher that does not get the water hot? is there a thermostat cutout (high temp) etc and how do you access the heating element for testing. Regards Chris

... Dishwashers

I have a JDB1090AWS about 3 years old. We noticed a smell and found cutting boards and plastic cups melted. Machine was off. Had to turn off the breaker. Checked both leads to element & have power even with machine off. Not sure if it could be the limiting thermostat; I assume that is to shut the heat down when it gets too hot. Element is on though when it shouldn't be to begin with. I did have to tighten the water supply. Had some water underneath, but all wires seemed dry. Any tests I should t

The heat element can only get so hot.It's timed so it doesn't exceed a period of on, exposing dishwasher contents to continuous high temps.Watch the timer and take note how long it broils your cookware.Good luck. ... Dishwashers

Hi Again, It is us with the dishwasher that we were going to do the test on on Sunday. We have made a mistake in trying to reject another person and accidently it seems rejected you instead. Please contact us again at [email protected] or on here. Please...we are so sorry, it is our first time on here so we did not know how things worked

Hello again,\015\012\015\012I understand.\015\012\015\012 I actually could see the issue was unresolved however, the way it works on here (I think ?) I was `locked`out when my suggestion was rejected I guess ? I am fairly new ... Dishwashers

Frigidaire Dishwasher model # FDB635RBB0, dishwasher keeps running for hours, the dail seems to stop part way through its cycle, the heating delay light is on. I tested the heating element & electricity runs through it, could it be the thermostat.

... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

DWF614SS not heating water, flow through heating element has been replaced and tested but still no hot water. Do I need to check the thermostat, if so, where is this located? Thanks for any help with this one. Owen.

... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

Hi I have a matsui mf160 integrated dishwasher about halfway through the cycle it stops and beeps 20 times and stops the cycle . I have tried replacing the 2 thermostats to now avail I have also tested the element which is ok both the salt and rinse aid are full . Please help its driving me bonkers

... Dishwashers

Dishwasher is 'tripping' electricity to the house fuseboard as soon as water heating begins in any cycle - cannot locate thermostat to test ?

This can be due to the fact that the heaters draw up more current than required and so trips the circuit. it will be important to remove and check the heaters, check if the contactors are faulty that feed supply to the heaters. Also if ... Dishwashers

4 years old with light use.fills with water.house fuse blows.reset house fuse & blows every time the door is closed.have striped to a point & can run the mashine if i disconnect the red wire to the heater element.it then fills & will not move on & obviously will not heat.heater element is expensive & looks time consuming to replace. ntc,thermostat,programmer or element ? some ideas or tests please

... Neff 24 in. S5457X0GB Built-in Dishwasher

Dishwasher Thermostat This dishwasher has two thermostats, one for TEMP BOOST WASH and one for TEMP BOOST RINSE. I'm floored that that they actually have two different thermostats for what could easily have been a single thermostat (unless washing dishes has suddenly become as complex and precise as launching rockets). but even more shocking is the fact that one thermostat is a $15 part and the other is $60. I suspect the only difference is the trip temperature so I'm looking for spec

... Frigidaire Dishwasher Temp Assure Thermostat - 154227805

Our GE model GSD4320Z00B is having a problem with the drain system. I've run the unit in the test mode and it does pump the dishwasher down. The problem is the unit does NOT pump down during a normal wash cycle. The fact that the unit works in test tells me it is not the pump. I've checked all the hoses and drain paths and there are no obstructions, again verified by the fact it works in test mode. Any test that can be used to determine the problem besides replacing parts one by one?

... GE 24 in. GSD4320Z Built-in Dishwasher

Maytag Dishwasher - found schematics and test codes

... Maytag 24 in. MDB6100A Built-in Dishwasher

I have a Blanco Dishwasher Model BFDWC65X. It appears that the thermostat may be faulty as the water gets extremely hot on cycle 3 which is supposed to operate at 45 degrees centigrade. When I open the door mid-cycle, clouds of steam emerge and the whole dishwasher smells hot - almost a burning smell. I have found an online source for a replacement thermostat, but would like to know how difficult a job it will be to replace the thermostat. Also where can I find a manual that details where the th

... Dishwashers

I cant get me dishwasher to start i have tested the overflow switch and its fine i have also tested the water inlet valve and its is fine. but it will not fill the dishwasher with water i have even removed the hose to see if there was any blockage in the line come out from the what inlet valve. the button light up on dishwasher and the cycles work a long with the start button, i have left the door open to see if the door senor could possibly bee an issue and it tested good and function correctly

Hi.If there is no voltage to valve, then parts that can be responsible are only and all the following:Overfill switch or overfill device.Door switch.Electronic control Wiring.If the overfill switc ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0256 seconds