Having problems with your Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher ?

BOSCH SGS69L02 Dishwasher, Hi, how do I change the fascia/control panel, as ours is starting to crack at the handle? I have a new panel on order, thanks, Tim.


Answers :

Repair Help & Product Troubleshooting for Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

BOSCH SGS69L02 Dishwasher, Hi, how do I change the fascia/control panel, as ours is starting to crack at the handle? I have a new panel on order, thanks, Tim.


... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

I have a Magtag dishwasher, model #MDB6650AWQ thats not running. I check the power supply all the way up to the door latch and it shows that there's power there. However the circuit panel not lighting up and nothing happens when you push the normal wash cycle or any of the other buttons. I believe the problems is electrical in the door latch handle. Is there any way to check the solenoids which are attached to the door handle before I order a new door latch.


I have the same problem with mine. It is 3 1/2 years old. The repair man was just here and said it is the control panel. It will cost $171.85 for the part and then $53.85 today for his visit and then a return visit when the part is in.\015\0 ... Maytag Dishwashers

I have a maytag mdb6650 aww dishwasher. The dishwasher just stopped. The light on the control panel is on. If I push the buttons to try a different cycle, the light over light wash remains lit, so the buttons don't seem to respond. I was wondering if it is the control assembly, or if the door switch is not working. The handle cracked a while ago, but if the dishwasher still worked even though the handle had cracked in half.


... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

Have a whirlpool gold dishwasher.The problem is that the clean lite on the control panel flashes not allowing the unit to work.I installed a new disposal and forgot to remove the plug for the dishwasher drain hose.When the flood happened I opened the door in order to stop the dishwasher.Now the unit will not work.The lite flashes 7 time ,then it pauses and flashes 7 times etc.Is there a reset procedure to run in order to get the unit to work or do I need to buy a new control panel?


HI,Can you please give the make and the model no. so that i can give you the manual.Waiting for your reply ... Dishwashers

The plastic recessed door handle on our Smeg Model PL823X Type 11053 has suddenly cracked and broken away with normal handling which makes it difficult to open the door. We are told we need a a complete new program selector panel, that is very expensive and we are informed we may as well but a new machine. Is that true and is that good design? Purchased about 2006/7


... Dishwashers

Hello! I just ordered a new facia panel for our Bosch dishwasher SHU9955UC/U12. It seems like it should be fairly easy to replace it (meaning, myself...). Is it really just a question of unscrewing the screws on the inside of the door, removing the old panel and then replacing the new one? Are there any especially delicate inside mechanisms/parts That should be protected? Many thanks.


... Bosch SHU9955UC Built-in Dishwasher

After power loss my ge monogram ZBD6880K00SS dishwasher just makes a beeping noise when I shut the door and when I reopen it the lights on the control panel are on but go off immediately. The control panel is unresponsive. Any trouble shooting I can do before ordering new parts?


... GE Monogram® ZBD6880NSS Stainless Steel Dishwasher

The maytag dishwasher model mdb7130AWB stoped cleaning correctly so we went from the arm assembly in bottom of dishwasher down to the cutter disc and we found a crack in the housing so i ordered that piece. the new part was designed a little different but we put it all back together the way it came off. but it started and ran maybe 1 minute and stopped. so i have pulled up the diagram and see some problems. in the current diagram. original there was no part 37, 17 19 and 3, alos the crew d


... Maytag MDB7130 Dishwasher

I removed door panel of Bosch SHV4803UC dishwasher in order to tighten the door handle. Now the the diswasher won't run the cycle, but the lights are on.


... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I need the diagram for the door pulley system so I can make sure I am hooking it up right. The original door chord/pulley assembly broke. I ordered new parts, Now I want to make sure I am putting it back together the right way. The edge of the screw- on floor panel is pushing the plastic hook off of the door hook when you shut the dishwasher door.


... KitchenAid Dishwashers

Neff Dishwasher Model: 195301525 built-in I require a schematic for this model so I can order some parts for the unit: Top panel which is broken Catch Door Handle


Telephone BSH 08705 543210 ask for spares department who are very good helping you with spares as long as you have all relevant serial and product numbers it can sometimes be difficult to get through because they are always busy, be persistent ... Neff 24 in. S5456 Built-in Dishwasher

I ordered a stainless steel door panel (SGZ1005UC) for my Bosch dishwasher (SHV45M03UC) and the installation instructions are minimal and the diagram does not match the door. I can attach the handle, but do not know if I should remove the partical board that is in the door when it shipped. Also, there are no pieces protruding that I can see for attaching the door.


Did you ever figure this out? I just got the door and have the same questions! ... Bosch Dishwashers

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

How does one change the colour panels on the front of the dishwasher. Need to change panels to white with new appliances. I was informed many years ago when we purchased dishwasher that panels could be reversed to new colour.


On any dishwasher, the bottom rail can be pulled off and the panel bends and pulls right off. ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Kenmore dishwasher 13749 needs a new electronic control panel


I have a similar problem. The control panel buttons are peeling off. It seems like a manufacturing defect rather htan steam damage. Did you replace the panel?Thank you. Michele. ... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

Our Amana ADB1500AWW dishwasher leaks at far left and far right edges ( at bottom points) of the inside door panel due to a design flaw. ie - In the fully open position ( door in horizontal position) the far left and far right edges (at bottom) of inside plastic door panel are stressed beyond what the plastic can withstand consequently the edges of the panel crack as far as 3 inches from edge to inside. This crack is very small and cannot be seen until the panel is removed and then full insp


... Amana 24 in. ADB1500AW Built-in Dishwasher

Our dishwasher was taking in water, circulating it but not heating it up or moving through the cycle. My husband took the control panel off and there were some scorch marks on it so we got a new one. He replaced the control panel and the dishwasher went fine for one night. It heated up and washed everything perfectly. The next day when we put it on it was back to square one plus the lights on the control panel are now not working. Just wondered if anyone has any idea what we could do or are


Yes it's time to visit the dump ... Siemens 24 in. SE64A630GB Built-In Dishwasher

I have a Whirlpool Quiet Partner 3. It sat up for a few months because the control panel went out and it took a while to save up and order a new one. Now it blew the thermal fuse. I put a 15amp automotive fuse in it to try it, and it runs until it fills up and blows the fuse again. I am trying to figure out how to test the motor and the heating element to see if they are shorted. My local repair shop told me that they want to replace my new panel with their panel first, and that after that


A 15amp automotive fuse is rated for a 12VDC system in an automobile, not a 125VAC houshold electrical system in an appliance. I don't think your automotive fuse can handle the start current being drawn by the main wash pump as the dishwasher starts ... Dishwashers

I live in the ny area. I own a ge pdw9700lii dishwasher with a costly custom wood front. This dishwasher has a top rack that has been a major problem for 5 yrs. The track has broken over 15 times. PC Richards has given me a $1100.00 credit to buy a new dishwasher from them. This washer is discontinued. The only unit GE makes is the pdwt502rii that accepts a custom wood front.GE says my panel will probably not fit. He wasn't 100% sure. Can you tell me if I can use my custom panel. I can't have an


... GE 24 in. PDW9700LII Built-in Dishwasher

I urgently need the template for dishwasher PDW9700N panel(pub # 5-x063). I ordered one last week and I got the owner's manual instead. I have an appointment to place the order for my cabinets at 5:00 this afternoon and cannot watir another week for the template to arrive. Can you help me by supplying the dimensions? If I have the outside dimensions of the panel, I can order it. Thanks, Don McCann


I finally got a real live person at GE who gave the specs for the panel and I was able to order my cabnits.\015\012\015\012Thanks,\015\012\015\012Don McCann ... GE Dishwashers

Fitted New Dishwasher Control Panel - Need reset sequence


One likely cause you can try first is to disconnect it from power via the cord or a breaker. after a brief period, it may reset itself.otherwise you likely have a logic board issue.logic boards seem to be very vulnerable in dishwasher env ... GE Profile PDW8400J Built-in Dishwasher

I have a Maytag MDBH 965AWW Dishwasher. I replaced the latch assmembly because the handle had cracked. I replaced it with Part w10130697 from Johnstone Supply. Now when I power the dishwasher up I


... Dishwashers

Maytag MDB5601AWS Dishwasher worked fine when I moved into my new home less than 2 weeks ago. It just stopped working a few nights ago and the sellers did not leave info on the dishwasher. The only buttons that light up are the buttons on the right side of the START/CANCEL button (which does not light up at all) and the LIGHT WASH button on the left side of the panel. The DELAY WASH button blinks for a while, and then all lights on the panel go off completely. No noise at all comes from the


CLICK HERE for your owners manual.\015\012\015\012If, after reading through it, You feel you h ... Dishwashers

My Whirlpool GU2400XTP dishwasher keeps blowing the fuse. It sat up for 6months because the control panel went out and I couldn't afford to get a new one. Finally replaced the panel and the thermal fuse blew during the first wash cycle. I tried to put a 15AMP fuse in it's place to check it out before I bought a new thermal fuse and it too blew during the first cycle. Any ideas?


Are you replacing the wires along with the fuse? It is important to change the wires too as they are usually the cause for the fuse blowing. Be sure and get the fuse kit that includes the wires. \015\012\015\012Is your water too hot? Hot ... Whirlpool GU2400XTP Built-in Dishwasher

Screw drop Hi I was installing my new LG dishwasher and I droped a screw in the hole in the side panel where you can put a screw to connect to the side of your cabinet. There is a small plastic cover which I removed where you can screw a screw into the cabinet. However the head of my screw was too small and fell in the side panel. I can not get the screw out or see it now although I know it is in the dishwasher. Is there anyway of getting it out or will this cause a problem? Since it is in t


A great retrieving tool for this is a flexible shaft magnet wand. I strongly recommend this tool be placed in everyone's toolbox.\015\012\015\012as far as leaving it there if not found? probably safe from electrical. will years of vibration allow it ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2366 seconds