Having problems with your Bosch 24 in. SHU43 Built-in Dishwasher ?

HI I AM [FED FED} UP WASHING MY DISHES BY HAND DONE A CONTINUIETY TEST ON MY FLAVEL DWFA20S AND THE ELEMENT SEEMS TO BE WORKING THERE IS NO POWER GOING TO THE ELEMENT CAN A NY BODY HELP HELP FROM A DISTRAUGHT WOMAN IN IRELAND


Answers :

Find a distraught man in Ireland that knows how to fix dishwashers(grin):) You can Google your unit for 'support'. I use Repairclinic.com, but your unit may operate on different voltage from us here in the colonies. Always be aware that 220 comes in from both ends and meets in the middle.
1). check the house fuse or breaker for the dish washer.
\015\0122). turn on the washer by closing and lock the washer door.
\015\0123). reselect desire washer setting.
\015\012
\015\012if it still have no electric to the washer. you need to trace the wire from the back of the washer to the breaker panel. if that is no something you can do,then you need to get an electrician.
Repair Help & Product Troubleshooting for Bosch 24 in. SHU43 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HI I AM [FED FED} UP WASHING MY DISHES BY HAND DONE A CONTINUIETY TEST ON MY FLAVEL DWFA20S AND THE ELEMENT SEEMS TO BE WORKING THERE IS NO POWER GOING TO THE ELEMENT CAN A NY BODY HELP HELP FROM A DISTRAUGHT WOMAN IN IRELAND


Find a distraught man in Ireland that knows how to fix dishwashers(grin):) You can Google your unit for 'support'. I use Repairclinic.com, but your unit may operate on different voltage from us here in the colonies. Always be aware that 220 comes in ... Bosch 24 in. SHU43 Built-in Dishwasher

I have an Indesit IDL500 dishwasher. It had stopped heating the water up, it looked as if it had short circuited and so i replaced it, i have power going to the element. A couple of forums state that it may be the pcb behind the timer/selector switch. Does this pcb control the program selection and heating of the element? or is there a thermostat that controls the stop and start of the heating element? Any help would be greatly appreciated


Hi\015\012\015\012The unit\015\012has two thermostats and you can test both of them for continuity before\015\012replacing, no continuity replace the thermostat. Hope\015\012this helps...please post back fo ... Indesit 24 in. IDL500 Built-In Dishwasher

Power going to the element but will not heat. If element is connected to direct power the element will heat!


Replaced Circuit board. Circuit board was burnt out. New one costs around £80 - £100. ... Zanussi 24 in. DE6850 Free-standing Dishwasher

Hello, Please help. I follow recommendations for cleaning: sewer pump, cleaning arms, screens of the dishwasher. However, still machine is not working. water is not going through arms: lower, middle or top. Also, I get water into dishwater when it starts, and when I open i hear noise for water dripping into hot elements,but no water is running throughout. PLEASE HELP


... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher

My dishwasher is a swan sdw7030w, water is going in and out the machine but no water is getting through to man part wher dishes are, am putting it on and it's jumping from my choosen cycle to economy while beeping, the salt light and starish looking 1 are both on as well, can anyone help me? It was working fine n old house, could it possibly be my water pressure as I can't think of anything else as a woman. Please help me.


... Dishwashers

My dishwasher is a swan sdw7030w, water is going in and out the machine but no water is getting through to man part wher dishes are, am putting it on and it's jumping from my choosen cycle to economy while beeping, the salt light and starish looking 1 are both on as well, can anyone help me? It was working fine n old house, could it possibly be my water pressure as I can't think of anything else as a woman. Please help me.


... Dishwashers

All hooked up and ready to go but after powering on, nothing happens. help


... Danby 17 in. DDW1802W Designer Series Built-in Dishwasher

Hi I have a kleenmaid dw3 dishwasher that will not wash it will go through to the wash cycle in economy [no prewash] and then it just stops. in day the dishwasher just started, weeks later. I hadn't realized it was still on as we usuallydon't turn the power button off. i'v put in a new timer but that made no difference. Can you help me, please! Sonya


Hi and welcome to FixYa,Offhand, I am tempted to think that there is no major component that would require replacement. At most would be the door close sensor/switch. May I suggest a simple test, jump the two wires leading to the switch a ... Dishwashers

Hi. Our DS603I dishwasher starts on the Rinse cycle on its own - it beeps, red light flashing and no water entering the tub. It does this even if it is open. Similarly, when we try to turn it on to do a normal or heavy cycle, it starts (making quiet a loud noise) and then goes to the Rinse cycle, beeping, red light flashing, no water going into the tub. The pump wheel is turning. We can't find any blockages in the tubes. We have power-cycled it many times. Please help!


Dishwasher Repair Guide: How To Fix a Dishwasher - ACME HOW TO.com\015\012\015\012\015\012\015\012 ... Fisher DS603W / DS603B / DS603I Dishwasher

J have a moyer diebel 500 HT i need a picture of the tank were the heater elements go ..i had a repair guy com in to wire the heaters up because they shorted out and he wired them wrong if you can help me out it would make my day thanx


Hello thereThe 500HT machine is very old one. Turn off the power first. To get to the elements you have to get the control box off first so you can get to take off the elements cover , now you can see the elements.If the system have been ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

I have a Maytag Quiet Series 300 dishwasher that won't start. There is power going to the unit, but the control planner was not function. please help.


I had no lights on my control panel, eventhough power was good.I replaced the control panel ($265 part), it worked for 2 weeks, then I now have the same problem.Frustrated, I am probably going to buy new from a different manufacturer. ... Maytag 24 in. MDB9750AW Dishwasher

I have a GE Triton XL dishwasher that is not spraying water onto the dishes. I just reset the power, and that didn't help. Putting it on the rinse only or wash cycle fills the bottom with water, but it sounds like a trickle vs. the spray. The heating element comes on and the soap door opens, but there's not spraying. I made sure there was nothing clogging the water line or other parts. What do you think is wrong?


... GE Tritonr XL GSD6260JCC Dishwasher

I have a whirlpool dishwasher that won't start even though there is power going to it. I was told by someone at Lowes ro shut the breakers off for 15 minutes and that would no doubt fix the problem. it did not change a thing ,can you help? the model number is DU1145XTPBA the machine was purchased in 2007.


Hi,\015\012 Check there is no water in the tray under the machine.\015\012There will be a switch that turns off everything if there is a possible leak - so may be that. Just blot up any water and try again.\015\012If there is a sli ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Nasty dishwasher there is nasty wet grunge at the bottom of the door, around the place the heating unit in the bottom of the dishwasher. half the time the dishes are clean in the bottom of the dishwasher. half the heating element is melted..for some reason...what do i do. the dishwasher still works, if we make sure the dishes are clean before they go in. using more for a sanitation thing than a dishwasher. can ya'll help me?


Sounds like your heating element is broken and you should replace it to prevent a possible fire hazard. \015\012You can replace the element easily for not alot of cash. You'll need to pick up a new one at an appliance parts store, just bring them the ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

KitchenAid dishwasher: KUDS01FL - I have had to replace the fuse every year and now I can't even get through on cycle with the fuse going. It is now dead again! It almost makes it through the full cycle and then stops (fuse blows)- no power - and there is some water left in the bottom which I have to physically remove. I spent a fortune on repairs every year since I bought it and would like to try to avoid another charge. I appreciate any help that you can offer. Thank you, Carol


I would check the pump. It may be slightly jammed or have debris which is causing it not to fully move or cause it to move very hard popping the breaker. Also with a jammed or broken pump, that can also cause water to be left in the bottom of the mac ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hello, we have a Frigidaire dishwasher Model# FDB1250REC2. There was all kinds of junk down in the lower filter area and when I tried to remove the parts they all came out together and then fell apart. I need to see how the parts go back together, because I thought I had them in there correctly, but when I opened up the dishwasher after running it the water sprayer was laying on the heating element. Could you please help me get it back together right? Thank you


I am having the same problem...were you able to fix it? ... Frigidaire Dishwashers

Yes I have a whirlpool DU1345XTVB1 dishwasher. Just got in July. After each wash cycle the dishes are not dry. I have been using Finish gelpacs w/jetdry & also have a off brand drying agent in reservior to help dry dishes. The water temperature is set pretty hot & washer is draining good. I have tried checking wash cycle a few minutes into 1st cycle to see if water is in filling & heating. Didn't know if maybe heating element going out or thermostat not working? Thank you for your time.


<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-language: EN" lang="EN">Hi,<br />Check your heating element.. </span><br />\015\012<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-lang ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Hello i have a slimline beko de2431fw dishwasher and it will not fill up with water. None of the settings seem to alter the noise it makes which indicates there is power going to it. Any help please! I have had a dishwasher repair person look at it and i thought it was fixed but its not. He charged me £50 for nothing.


... Dishwashers

Dishlex DX302 Hi mate, I have the smae problem with the water not heating . I have checked for the burnt out relay (as is common)but no go. You mentioned you could send the service manual and wiring diagram for this model to the previous user you helped out. If you could please send it to me that would be grate as I want to test the heating element. [email protected] Thanks Jason


... Dishwashers

We just reinstalled our dishwasher and there doesn't seem to be any power. The current going to the dishwasher is fine just nothing happening. No buttons are working no light on the display. Help!


DO U HAVE A MODEL # AND MAKE ? ... Dishwashers

Have a frigidaire dishwasher (model- PLD4375RFC0)about 2 years old. Set to run as we left to go out of town- when we came back all lights flashing including error- found a child's plastic bowl that had fallen to the bottom and had a melted spot as it was next to the heating element. Called support and were told to master restart- shut the power off for 15 minutes. Did and now flashing "27". Cannot find a code for that and neither could support without sending out a repairman. Any advice before


... Frigidaire Dishwashers

Neff dishwasher will not switch on , checked fuses etc and positive that power is going to the machine but will not switch on,is there any safety feature such as blockage or otherwise stopping machine from switching on, red lights not coming on, machine 4 years old and very little use? can u help


Just went through this myself. It could be a latch switch. Open the door undo the screws that holds on the inside door panel remove the latch. The 2 black boxes with wires attached are the switches. Take them out (use your camera so you know how to p ... Neff 24 in. S4443 Built-in Dishwasher

Dishwasher confused Dishwasher was switched off just after cycle commenced (tablet had been released). On restarting dishwasher, it wouldn't take in water and has just been going through the motions of the cycle without anything happening. Even when the power button on the machine is switched off or the door is opened, the motor continues to run but without water. Water is definitely switched on under sink. I think the computer is confused - can you please help?


I suspect this is nothing to do with switching off during the cycle.take the bottom plate off and check if there is water leaked into the bottom pan. alternatively, if you can, tilt the machine back to 45deg and see if water runs out.most ... Dishwashers

The control panel on my dishwasher will not work. I have tried the unlock button and that was not the problem...I have turned off power to it for 2 minutes and that was of no help either...Can someone please let me know what is going on with my dishwasher....


Your touch pad control panel has gone bad. The part alone is about $150. not counting a house call and labor. If this machine is over three years old I recommend replacing it. A repair without a warranty is not cost effective. Joe ... Whirlpool DU930PWS Built-in Dishwasher

Karcher 2.35. used it for about an hour, working fine. Suddenly motor stopped. Checked fuse and conections...all good but no go. Disconnected water hose and gave it a rest. As I was putting it away, connected to power and motor worked. Connected hose and motor won't work!! HELP! Thank you, Cliff Taylor


... Karcher Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1377 seconds