Having problems with your Bosch 24 in. SHU43 Built-in Dishwasher ?

Replace cover on Bosch Dish washer> Now a C6 code is displayed in the window

Answers :

I had the same problem after replacing the white panel on my Bosch SHE45M02UC with a stainless panel. I got the C6 error code. I called Bosch customer service twice and neither rep was helpful. One guy told me he didn't know what the C6 code meant. He suggested that I call a local appliance repair guy and he would know what the code meant. I replied, you mean to tell me you work for the manufacturer of the dishwasher and don't know what the error code stands for but a local repair guy that doesn't work for Bosch does?

After all this frustration, I took the panels off and tested the dishwasher with no buttons. It worked fine! Turns out, each identical button isn't identical. Each one is labeled A-G. After putting it back together, no more C6 code! On a side note, try reseting the dishwasher. With the dishwasher on and door closed, hold down the cancel/reset buttons for 5 seconds and release. The disher should drain and reset.
Took mine apart and got the same C6 code when I replaced the control unit. Took it apart again, replaced buttons correctly, and now the unit works fine. The buttons, in particular the buttons on the left, will be way too "jiggly" and don't spring back properly if you have made this error. Each button is worth a penny, but that's one more penny Bosch wants to save, so they make you harvest the old buttons from your cheap plastic garbage fascia.
\012I can't believe I paid 80 bucks for another chance to have this flimsy disaster of a part break on me. Fool me twice, shame on me.
\012Could I just say THANK YOU to the folks who posted this fix. Bosch was unhelpful and lied to my face that this was a problem.
Repair Help & Product Troubleshooting for Bosch 24 in. SHU43 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replace cover on Bosch Dish washer> Now a C6 code is displayed in the window

I had the same problem after replacing the white panel on my Bosch SHE45M02UC with a stainless panel. I got the C6 error code. I called Bosch customer service twice and neither rep was helpful. One guy told me he didn't know what the C6 code meant. H ... Bosch 24 in. SHU43 Built-in Dishwasher


... Bosch Dishwashers

My bosch dish washer is displaying an error code of e20

... Dishwashers

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring The solution I tried didn't clear the error code on the panel. Is there a reset or do I need to replace the aqua sensor or ? The machine still won't start and displays a #1 on display. There is no water in the whi

... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I have a Frigidaire FDB2810LDC1 dish washer displaying codes

The multiple sensor errors indicates your main timer/circuit board has failed.A True sensor error for your machine will start with a Letter. F, FL, D, etc.Everything is incorporated to the board - so there is no separate com ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I have a Bosch dishwasher, stainless steel front- with buttons on the inside top( same as display, and the washing cycle won't start. Water seems to be running into the washer, as I can hear it, but the cycle never starts. Recently, I had clogged garbage disposer issue that has been resolved. The dish washer drains into the disposer, and I had free standing water left behind in the washer for 2days during this time.. Could this be the issue? Can you help me figure out this problem? Thanks!!

... Bosch 23 in. SHU 8805 Built-in Dishwasher

What does e16 error code mean on a bosch exxcel dish washer. i am not able to turn a cycle on as this code is dislplayed.

... Bosch Dishwashers

Bosch SHU43C My Bosch SHU43C is stuck with the drain pump running. I ran the self-test and it gave me the fault code 4 wich indicates a filling fault. The washer is empty and all wash cycles display the correct number of minutes for the cycle. It counts down to 0, but the pump continues to run. Does this indicate a stuck float, or is the problem with the control board? Where is the float located? Are diagrams/pictures available on-line anywhere? I've done some searching, but haven't found any. R

My SHU43C is just over 3 years old. I had a similar problem recently. First, there were a few floods. Then, the Bosch only drained non-stop. Even when I used the Cancel Drain buttons the drain pump would run without stopping. When I ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishwasher not draining E25 error code (Bosch exxcel) . I have cleaned filters & removed pump inspection cover to check / clean debris I have also checked the waste water pipe is not kinked, it runs for 1hr 15 mins last time and then cut out with the error code displayed.

Gr8 stuff klaudi & Nypmh - rocking it back 45% worked a treat. Bloody BonzaShell XX ... Bosch Dishwashers

Have a 15 day old Thermador Dish washer direct wired to the circuit breaker, replacing a DW that was there for 10 years. Wiring is the same age. The unit will not turn on and I took the cover off the electric cover the hot wire had melted the connection. what's going on? model DWHD630gcm

... Thermador DWHD630GCP Dishwasher

Bosch aquatech dishwasher will not fill with water and displays code F in the wash time display window. Removed blockage from the inlet supply pipe, but machine still does not fill

... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Dish washer displays pf code

PF is probably PE like mine, sometimes the bottome row of the liquid display doesn't work properlyPE is a Pressure Error - condition - The water level in Tub goes down during operationPossible Causes¥ The Circuit of ... LG Dishwashers

Error code 7h on bosch model she46c dish washer

... Dishwashers

I have a bosch SHU6802UC dish washer. Recently the cycles were getting very long (3+ hours) and now when you press power/start, the unit turns on and you can hear the rather loud hum (pump?) of the cycle starting but it does not do anything else, just continues the loud hum. No cycle, does not fill with water, nothing. I ran the diaognostic and it immediately came up "7" on the display. Any thoughts or direction would be greatly appreciated. FYI, I did thuroughly clean it which made no di

There are a few possibities...if you remove the lid and take the two t20 screw off the left side panel at the front you could check the pressure chamber and its hose are not blocked. Use the link and go to page 4, part 263834 and 361113. You ca ... Dishwashers

Model SHE6AF02UC/02. Dish washer will not run had code h:01 at first now displays h:02

... Dishwashers

My dish washer GE twenty two hundred have a code in window

... Neff 24 in. S5443X2 Built-in Dishwasher

I have a heller hdwe12ss dish washer with error code 4 showing on display can you help me

Hi \015\012\015\012Error 4 is usually caused due to the unit not draining properly or the float switch trip. Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged ... Dishwashers

Bosch SGI4345AU/17 shows 2H on the display, it does not seem to matter which program is selected, the unit runs continually. It does not heat the water or finish any cycle. The washing tablet covers the dishes and is not rinsed off. Any thoughts

The Control unit on your Bosch has a burnt out heat circuit. Just about every dishwasher has a number of "thermal holds" during the wash and rinse cycles in which the controller waits for the water to be heated to a specific temperature ... Bosch Dishwashers

My bosch dish washer won't work. A number 1 is displayed on the electronic panel. what does this mean Paul

Helloduranjp,Welcome to fixya. You said, Your Bosch dish washer won't work. A number 1 is displayed on the electronic panel. If it is displaying"01" then that means the extra dry setting is being applied!Did you t ... Bosch Dishwashers

Whirlpool dish washer displays error code FA. what does it mean? Thanks.

... Whirlpool Dishwashers

I have a GE dishwasher (GSD4020Y70BB) new in 1996. I replaced the whole motor assembly in 2007, seal was leaking. My dishes are not getting clean now, dried food left on plates, coffee stains in cups not being cleaned. I removed main spray arm, found nothing, turned washer on and plenty of water gushing out. I took the cover off sump all clean. I removed the filter screen in the back, there appears to be a valve with some soft rubber around it. Water gushes out of this, does stop during the cyc

Have you checked the drain pump impeller and drain hose? I am curious if there is a back siphon from the drain hose or the waste outlet at the garbage disposal might be blocked or plugged with food debris.\015\012I wou ... Dishwashers

My Bosch dishwasher model #SHX99A15UC control panel displays a "Delete Errors" code and will not allow me to adjust the Rinse Aid level. The dishwasher stopped drying the dishes when this problem started.

... Bosch Dishwashers

Hello, Firstly, thank you for what you do, you help so many people and I know it takes time. I have a Bosch SHE44C06-UC Dishwasher. I fixed the E1 (Heating Circuit) error. First, before I found the writeup about the solder joint, I bougut a new heater and replaced it, ithe part included the element, flow switch and high temp sesor soall are new, then I fixed the solder and E1 went away and the cycle finsihes and the dishes are clean and dry. Still I check the error codes and still have

... Dishwashers

Bosch dish washer model SHX57CO2UC/21 error code CI or PO what do they mean

... Bosch Dishwashers

I have a Kenwood KDW243A model dishwasher, and half way through programme the bleeper goes off and E4 code appears in the display window. There is nothing in the Instruction Manual which explains this. What is going wrong? The cycle moves on but the dishes are not drying and are greasy.

Hi,\015\012The E4 error means that the flood sensor is\015\012detecting water in the base pan. Pull the unit out and tip it backwards\015\012for 30 minutes to drain the water out. and reset the flood sensor.\015\012After 30 minutes tip it ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1805 seconds