Having problems with your Bosch 24 in. SHU43 Built-in Dishwasher ?

Like the other writer,mind to fills with water when it's off. I looked at video my model is SHU43CO2UC,I don't have that part in my tub. It could take 10-12 hours before it overflows.


Answers :

Your water inlet valve on the back where the water supply comes in is sticking. It needs replacing.

Repair Help & Product Troubleshooting for Bosch 24 in. SHU43 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Like the other writer,mind to fills with water when it's off. I looked at video my model is SHU43CO2UC,I don't have that part in my tub. It could take 10-12 hours before it overflows.


Your water inlet valve on the back where the water supply comes in is sticking. It needs replacing. ... Bosch 24 in. SHU43 Built-in Dishwasher

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

I have a Bosch dishwasher that is about 4-6 years old (model SHU8805UC/U12). A few days ago I found clear water in the tub hours after the wash cycle had completed. I drained the tub by resetting the cycle as instructed in the user manual, but the tub gradually filled up with water again after several hours.. will replacing the inlet valve solve this issue?according to what I can tell for my model the water valve assembly (part No. AP3783031) is the part I need. How difficult and expensive


Just pulled mine out last night. You have a different model but it should be the same. Remove the bottom dress panel and detach your inlet hose from the water valve assembly (have a rag handy to catch a little water). Two torx screws on the front ... Dishwashers

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

Frigidaire FDB520RHB Dishwashers : We bought this dishwasher about 3 months ago. Today I ran the washer before I left to do errands and when I returned, I believe the washer had finished its cycle. But about an hour later, I noticed it had started up on its own? It then proceeded to run for almost 3 hours before my husband canceled the cycle. We were kind of waiting to see if it would stop on its own, which is why we let it go so long. I think it usually takes about 1 1/2-2 hours to wash. Could


Try to run the dishwasher on a short cycle like rinse and see if it finishes the cycle.It is likely the heater or hot water temperature is not reaching the desired level and this could cause the extended wash cycle. Feel water temperature ins ... Dishwashers

Dishwasher overflows I have a Maytag PDB3600AWX dishwasher. The pump works well, pumps all water out of the tub when reaching the appropriate cycle state. However, it keeps taking in water when it's not running / turned on (e.g., overnight) and the tub starts overflowing, cuasing obvious leakages (to the basement). What part needs to be replaced? Thanks, C Artz


Sounds like you've got a problem with the water intake valve(s). If it takes on water without water running in the sink, that is where I would look. If it happens when you use the sink, then I would also check your drain hose placement ... Dishwashers

My Bosch dishwasher is taking hours (at least 3 - maybe more) to complete a cycle. There is gummy, yucky stuff building up inside - sorta pinkish brownish. Could the water not be hot enough? A couple of months ago we installed an on-demand hot water heater and I wonder if that could have anythig to do with it. I've tried running the hot water in the sink first but that doesn't help. Any ideas


If your on demand heater is one of the small ones that mounts under the sink, it will not flow enough water to fill your dishwasher. the dishwasher is waiting for the water level to fill before it starts washing. your bosch will heat its own wat ... Bosch SHX46A07UC Built-in Dishwasher

Like so many others, I am experiencing a problem with my GE dishwasher's smartdispense. I have ALWAYS used the SAME detergent(Cascade Complete)and still have the gumming-up issue. I noticed that the dishes were not getting clean and when I opened the smartdispense cover I could see that the detergent was gelled. Spent the better part of 2 hours trying to remove as much gunk out of the dispenser as I could with the help of a plumbers flexible plastic drain cleaning tool. This really angers me as


I had the same problem as you also using Cascade Complete. It turned to a wet solid and completely cloged up. I have spent 3 days cleaning it and now have it working again. I had to spoon out what I could, but the purge method still would not wash ... Dishwashers

The wash cycle seems to take hours. the water wont drain away and i get a little blinky light on the front. i dont have the manual either so i dont even know what the arrow buttons mean on the front of the machine


... Zanussi 24 in. IZZI ALU Built-In Dishwasher

Settings i dont get the setting purpose and dont understand it what does the settings do cuz my washer takes 2 hours for a small amount of disher


Settings should show you how the machine is to function. Do uou have a manual? ... Beko DFN1000X Dishwasher

My dishwasher BOSCH SGS4802EU/12 dont stop after 92 minutes, wich is the time of one cycle. it take more than 3 hours to finish. I think that can be resolved if y make a reset on the dishwashwer, but y dont how to make the reset. Can you help me please? Best regards. Pedro Antunes


... Bosch Dishwashers

Kenmore model 665.16509200 Does not clean very well and now dry cycle not working. Wash cycle takes almost 2 hours, and still dishes had gradoo and white detergent on them, even ones that were clean when they went in. The drying coil had plastic melted on it once before, so that could have caused that malfunction. I am not so concerned about that, it is the dirty dishes after 2 hours that is driving me nuts. The short wash cycle leaves EVERYTHING dirty, so I just quite even trying that.


... Kenmore 13599 / 13594 / 13592 Built-in Dishwasher

Bosch dishwasher the string on the door tensioner has broken I have the new part but dont know how to got out the lower part. Do I have to take off the hole door or is there an easy way to change it? It seems odd that as its string and must be prone to breaking that there is not a simple way to fix it.


You have to remove the entire dishwasher from under the counter. Then locate the broken cable. There is a panel you need to remove to access it. It attaches to a spring which goes to the underside of the dishwasher. Not an easy repair. Need alot ... LG 24 in. LDF 7811 Built-in Dishwasher

My Beko dishwasher dwd 4310 w will run a full cycle but makes a choked, gargling sound and takes hours to complete a cycle. I mean 7-8 hours! There are long periods of inactivity with the machine before it goes into the next part of the cycle. It is the same on all settings. Please help!


... Beko 24 in. D3731F Free-standing Dishwasher

I have a Bosch (SHU5302UC/U12). The washer often takes 2 or more hours to run. Sometimes it gets stuck for a long time part way through (e.g. just sits at "43"). Other times, it gets stuck at 1 and won't stop on its own. The latest thing is 2 dots have appeared on the display that I've never seen before. For example, instead of "43", it reads "4.3." Eventually it gets to "C.L." but does not stop running. Also, its been making very strange noises during part of the wash cycle.


... Bosch 24 in. SHU43 Built-in Dishwasher

I was given a low hour, 10 year old, CH PW205002LE 6.5 HP gas vertical shaft 2000 PSI/2.5 GPM pressure washer with a Lavor pump. It did not work - no pressure. I found a broken o-ring on the brass unloader valve and replaced it with a ring as close in size as I could find as the part break down doesn't state size. Everything was very clean. I coated everything with silicine grease and reassembled, seating the brass piston? as deep as it would go. I had to press the trigger in order to get the mo


My personal experience is that 40% of all the sellers I dealt with on e*** exaggerated their products or worse. If you decide to go the e*** way be sure you put it on a good credit card so you can get your money back if it's a bust. Don't use your ba ... Campbell Hausfeld Pressure Washers

Washer won't start tried everything , I could think of changed spark plug tried new gas , Two things that bother me are . if i take out the spark plug and put my thumb over the spark plug hole theres no pressure and the wire that comes from the coil to shut off the pw it has continunity from the coil to the pin that sticks up to shut off the pw but it also has continuity from the coil to all parts of motor.


... Pressure Washers

My Siemens dishwasher takes 4+ hours to complete a cycle. The inlet water supply has been always COLD, which means that the dishwasher always managed to heat the water properly. What could be happening now?


... Siemens 24 in. SE53200 Built-In Dishwasher

Dishwasher will not shut off and has water in the bottom of the tub. Whirlpool Gold, Made in Germany GU120ES1Q. I had a repairman in to check it out yesterday. Now the dishwasher will not turn on at all and the repairman says the two parts that it could be are not available.


... Whirlpool Gold 24 in BuiltIn Dishwasher w Adaptive Wash Cycle 24 in Builtin Dishwasher

Machine does not heat up. The water remains cold and the cycle takes hours irrespective of the setting temp. Heater seems to be OK and a tech guy repleced the sensor today as he thought that was the problem after everything else seemed to checkout ok but still no go. It has already cost us 200 dollars and I dont want to keep spending money having tech guys guessing the problem. Any suggestions? Thanks


Depending on the model, I have had loads of Bosch dishwashers fail because they have blown the heater relay solder joint on the main control board. Usually just requires control board to be opened up, and the faulty solder joint re-soldered. Occasion ... Bosch Dishwashers

How does this system work? I paid $19.99 to live chat a problem and the link went down. I tried to get back on line but the system would not let me. i have now paid for a full monthly membership and the system wants to charge me again for a live chat. I have emailed the company and i had an automated email saying someone would get back to me but it could take up to 48 hours. I am feeling a bit like this is a con... what am i supposed to do now?


Hi,\012You can view the solutions posted to your problem by going to your "My Profile" page. Direct link: http://www.fixya.com/users/kazziebingAlso, you can contact FixYa Premium support by clicking this link:http://www.fixya. ... Dishwashers

Maytag Model No WU202 is running through all cycles but is not pumping out the water from the tub. I can hear the pump running and a gurgling sound. Could it be the micro mesh filter that is plugged? Any detailed drawings available of the lower wash assembly and instructions to take it appart? This machine is more than twenty years old.


Hi,It sounds like your belt broke. Open the bottom access panel below your door and check. The part is :-http://www.repairclinic.com/SSPartDetail.aspx?PartID=2814&PPStack=1If you take off the front ... Maytag Dishwashers

When I set it to normal wash it takes more than a hour to finish I also press all the other settings dry heat, sanatizer. dont know if I'm doing something wrong


Every setting extends the wash time. You only need sanatizer if your doing a lot of baby bottles. The normal cycle with the strong dishwasher detergent will kill all bacteria anyway. The dry heat extends the time even longer and uses more hydro. Just ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I have a bosch shu312uc with a few issues 1. takes forever to count down (pretty sure its a control module) 2. dishes dont clean - smells terrible like bad water (could this be a result of the control module??) i checked to see if the trap was clogged, it didnt appear to be. any suggestions??


Hello Cliff, The first thing which comes to mind when I read your post is 1) your on the right trac, and 2) this is a very common occurance with B/S/H ( Bosch, Thermador, Gaggenau ) manufactured dishwashers, a failed solder on the control board, spec ... Bosch 24 in. SHU53 Built-in Dishwasher

I have purchased a house with the single door dishwasher and it takes forever to wash - about two hours - what could be the problem?


Normal cycle is approx 2 hours. Fast cycle is approx 55 mins. You can download the user manual from the Fisher and Paykel website www.fisherpaykel.com.au, click on "customer care", then "Find a User Guide". \015\012The user manual has a lot of u ... Fisher and Paykel DS603SS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1047 seconds