Having problems with your Bosch 24 in. SHU43 Built-in Dishwasher ?

I have a Bosch diswasher She6Af02uc/03 and its not even 6 months old. There is an error code that keeps appearing e-02 but I cant find what that means? Any help would sure be appreciated! Thanks in advance.


Answers :

The machine is under the makers 12 months warranty contact the supplier.adrian,,,,,,,,
Repair Help & Product Troubleshooting for Bosch 24 in. SHU43 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Bosch diswasher She6Af02uc/03 and its not even 6 months old. There is an error code that keeps appearing e-02 but I cant find what that means? Any help would sure be appreciated! Thanks in advance.


The machine is under the makers 12 months warranty contact the supplier.adrian,,,,,,,, ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a prima lpr600 fully integrated appliance. it appears to start - emptying machine to begin with, then starting to pump in water - but then starts to beep continuously! the display light flashes 11 times before a pause, but i cannot seem to find what this error code means. please help!


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

I have a new world DW60 dishwasher which comes up with an E1 error code. I can't find what it means anywhere & I have checked the manual. Can it be repaired? Do you do the parts needed? I appreciate your help. Michelle


... Dishwashers

Trying to find the dimensions of the Miele G694 SC Toughtronic Turbothermic Dishwasher. It doesn't appear to be the standard 24 inch size and wanted to verify the dimensions before I replace it with another dishwasher. Any help would be appreciated.


Hi,\015\012\015\012if you go to the Miele website you should be able to download the manual for the machine if you don't have one and in the installation part of the manual this should give you dimensions. if not Miele service dept should ... Miele 24 in. Touchtronic G694SC Built-In Dishwasher

I have just aquired a Proline Logic dishwasher DWF1250 P but have no manual for this. I have no idea what all the symbols under the buttons mean so I dont know what wash to put it on. Please can you help, I cant find a manual to print. Thank you.


... Dishwashers

I brought a Buffalo WHR-G300N Wireless N Router, did all the login screen thing, connected all the cables correctly and everything.. but I can't load the IP Address ( 196.182.11.1 .. Not sure if thats exactly right) but anyway, it wont load.. so I cant configure the router to connect to my laptop, which has wireless network enability so, i have no idea what to do, any suggestions? Any help would be greatly appreciated!


If you are using the router as an Access Point, 192.168.11.1 wont work unless it is in Router Mode. You should find out LAN IP for the G300N, and use that to access it with username "root"and nothing for the password.\015\012\015\012192.1 ... Dishwashers

Normal cycle light blinking, won't turn on MDB7609AWW1. Was told it was micro computer. Replaced it....same problem..Put old micro computer back in.. wife secured all wires and banged the machine and it started working tfor a few Days.. stopped with same old symptoms..I'm sure guru is correct and it is the touchpad, but his facing appears to be glued on,I don't wan't to ruin the front of the console , and I've not been able to find a touchpad part on the schematic or online. Help???


... Maytag MDB7609AW Builtin Dishwasher

I have a kenmore ultra wash dishwasher mdl nbr 665.1304 that wont close. the lock appears to be stuck but the door is open and i cant get it to close. any help would be appreciated. i am a single m


... Kenmore Dishwashers

Bosch KGV2620GB/03 Hi, I have a Bosch KGV2620GB/03 fridge freezer (bottom freezer, free-standing, the product listed below isn't right) and the light in the fridge won't switch off when the door closes. Any ideas? I assume it's something to do with the switch that registers the door has closed, but not sure how to fix. It's an electronic control, so there's no temperature wheel/switch inside, and we don't have the user guide (which I also can't find online!). Any help much appreciated. Dan


Hi,\015\012 If it is the one I am thinking of, then the whole light assembly is actually able to move and this also acts as the switch.\015\012\015\012Turn off the appliance and unplug.\015\012\015\012You should be able ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I have an Electrolux Dishlex DX303 Dishwasher. Recently it has been stopping early in the cycle and the display shows -10. The selected program is flashing. The cycle will restart by pressing the program button again but it no longers wash's right through the wash pe=rogram as it is meant to. I do not have the manual to trouble shoot and find out what this means. Your help would be appreciated. Regards Peter H


Hi peter,\012according to manual book -10 is not filling water fast enough.\012check inlet hose and valve, check pressure switch and pressure SW hose and clean sump filter which located bottom of tub that plastic strainer and stainless mesh clean the ... Dishwashers

I have an old Frigidaire Dishwasher model # FDB510LCS5...I can not find any info on will you please help me to find a book or a web page that will help me to take this crappy machine apart and rebuild.Any help at all will be greatly appreciated.


... Frigidaire Dishwashers

My 13 year old Frigidair dishwasher (model FDB221RFR2) is not disolving the soap tab that drops in during the later cycles. We sometimes find the soap sitting on dishes or on the bottom. It appears that there may not be enough water but I'm sure of how much there actually should be. It also appears that the soap may be dropping late but again I'm not sure of when it should normally drop. I checked the inlet value and it appears to be ok. I also checked the timer (to the best of my ability) and i


CHECK YOUR WATER TEMP, IF ITS NOT HOT ENOUGH SOAP WILL NOT DISOLVE. I HAVE ALSO SEEN INTAKE VALVES DROP OUT LATER IN CYCLE. THAT MAY BE YOUR PROBLEM. GOOD LUCK! ... Dishwashers

Like sand Not getting the dishes clean it seems like sand and other stuf in the glasses :( cant find any extra filters , have clean the regular ones in the bottom of the machine. Please can someone help me find a solution or find a manual online.


Clean out both top and bottom spray arms\015\012Deep Diver ... Bosch 24 in. SHU5305UC Built-in Dishwasher

I have an electrolux wt30 m/n LS6 dishwasher, trying to find a wiring schematic so I can try and rewire it to operate on 220v 1 phase, presently it's wired for 220V/3 trying to find a site that may offer a parts and repair manual w/ schematic would appreciate some help in resolving this problem


... Electrolux Dishwashers

I have a MDD8000aws dishwasher with three colored leds in the front panel above the handle. What does it mean when the middle light is flashing red. I never could find out what the lights were for. please let me know what any combination of these light mean. Thanks so much for your help. Glenn Pritchard


The middle light means that the dishwasher is set for a 6 hr delay befor it starts. The light to the left is hi temp wash and the one on the right is control lock press and hold for 3 secondes to lock the controles. You can get the manual on the link ... Maytag MDD8000AWS Builtin Dishwasher

Hi, I have a westinghouse dishwasher 921 model. When i start the dishwasher (on eco normal), it counts down from 39mins to 36 and then starts flashing "FL". Nothing seems to happen (ie dishes aren't washed) Are you able to help over email. I have checked the filter (thinking "FL" means filter, but the filter is completely clear. Any suggestions or help you can offer would be appreciated. Kind regards Donella. p.a, I don't have a manual.


Check to see if you have something stuck under the float it is the mushrrom looking thing at the front bottom left hand side ... Dishwashers

We have a Kenwood KDW8ST2A Dishwasher which is about a month old. The other day we had to pull it out from under the worktop because something rolled under it. When we put it back and went to use it later that day, we got an E1 error code appear and it's been like that since. We pulled it back out to make sure that we hadn't accidently pulled or loosened any of the pipes. We have the manual which does tell us what the error means but it doesn't tell us how to fix it. I'm sure it must be somethin


You can find a manual here ... Dishwashers

Hi i am trying to remove my dishwasher from the (way it was attached to the undercounter) i cant find my mannual to find out how in the workd it is attached. Please help


The installation instructions can be downloaded from this site.\015\012Hope this is helpful. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

YES We are having aproblem trying to find a diagram of our kitchendishwasher there seems we cannot find anywhere online to get access to a drawing or diagram of some kind to help my husband . If you know of a website we can go to that would be greatly appreciated the dishwasher is a kitchenaid aaaaaMODEL kudso1ijwho THANKYOU


As a general rule, they are supplied in the unit, small plastic pouch, look around ... KitchenAid Dishwashers

Its happened before i have a kud101flss6 diashwasher and something trips the computer a repairman came and pressed a sequence of buttons on panel and fixed it cant find repairman and cant remember sequence help


Usually an interruption in the dishwasher program results in a blinking "Clean" light. This commonly indicates a component problem or program malfunction. If a\015\012component is defective, it's usually attributed to the heating cycle or\015\012the ... Dishwashers

Hobart LX30 Thank you for your help earlier. I figured out a way to get the machine running on 220. Now my problem is finding the intake for the sanitizer and detergent. I have looked all over the machine and I cant find tubes anywhere. The guy I bought it off of tells me that when the water temp is over 170 you don't need any cleaning products. I just want a second opinion. I feel that our glassware is not as clean as we would like. Any thoughts?


I'm not sure I'm comfortable with the direction your seller is leading you. I assume this machine is installed in some type of place where you are serving food to the public. If this is the case, then the local health inspector will expect to see a w ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I tried to repair my karcher spray gun. I have a small spring and a small white plastic piece which the spring fits onto to find a home for. I'm sure its to do with the trigger handle but I can't see where it fits. Can you help, a diagram would be helpful.


... Karcher Pressure Washer Gun 91120200 91120200

Ariston dishwasher i have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left (total 4 lights)...can anyone help. i cant find the model number on the machine. The lights looking like sprinkiling water..i have filled the salt, and rise etc but still it wont come on please help


I have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights ... Ariston Technologies L63 Free-Standing Dishwasher

Model 01902 2350 psi . engine runs fine , sprays out nozzle but lower pressure and water sprays out plastic elbow on relief valve , that is supose to **** in soap if used , cant hold finger over spray from elbow , high pressure , took apart relief valve and plastic valves all orings are ok , brass pump seals look ok , all back together , still blows out elbow . ?? plastic spools were out by somebody else , not sure if they are in right , cant find picture to compare .


It sounds as if the non return valve in the elbow is the wrong way around .The o-ring normally goes in first then the ball then the spring. Try it and good luck. ... Pressure Washers

GE Quietpower 3, GHDA480N10WW. Need help. Dishwasher has worked fine. used it last week. Today, when I pushed the buttons, it did not turn on. The power is hooked up, breaker has been checked and re-set but buttons do not activate at all. Acts as if there is no power at all after a week of no activity. Any help would be appreciated. thank you in advance.


... General Electric Adora GHDA670N Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1176 seconds