Having problems with your Bosch 24 in. SHU53 Built-in Dishwasher ?

Bosch Dishwasher Model SHU5316UC-06 -- what does error code 2H mean?


Answers :

2H is not exactly an "error code", but it does indicate a problem. It means that the machine exceded its wash time by more than 2 hours. This is usualy caused by a failure of the heater, most often caused by a failure of the controll. Remove the control from the door, remove the plastic housing from the control, and check for a bad solder joint on the heater relay.
\015\012If you find a bad solder joint, REPLACE the controll.
\015\012Or call a qualified service person.
\015\012
\015\012NOTE: The SHU53A dish washer with serial numbers from FD8205 to FD8507 are included in a factory recall. If your dishwasher is one of these contact BSH @ 1-800-586-9226 24/7.
Repair Help & Product Troubleshooting for Bosch 24 in. SHU53 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bosch Dishwasher Model SHU5316UC-06 -- what does error code 2H mean?


2H is not exactly an "error code", but it does indicate a problem. It means that the machine exceded its wash time by more than 2 hours. This is usualy caused by a failure of the heater, most often caused by a failure of the controll. Remove the cont ... Bosch 24 in. SHU53 Built-in Dishwasher

What does the error code LE mean on my LG Dishwasher Model LDS5811ST mean? Dishwasher makes noise in the rinse cycle and at end of cycle LE error code shows in window.


MAin wash motor needs replacing\015\012\015\012Affordable Appliance Repair\015\012Lake Forest, CA 92630 ... Dishwashers

My bosch dishwasher model she6ap02uc has error code h01. What does this mean?


... Bosch Dishwashers

I have a Bosch SHU5316UC dishwasher. The last two times it ran, my wife says the display said "CL" (for clean) after running through the cycle, but she heard a "motor running" until she opened the dishwasher. Attempting to run the dishwasher tonight, it won't start - it displays a "P" (error code?) when you attempt to start it. Can you tell me what the error code P is? Thanks, Dave


P stands for program in computer algorthms. The device displays program whenver chages were made to the default settings. A powered on devices least has malfunction only requires reseting to attaon default features. Depending on the type of device, r ... Bosch SHU5316UC Dishwasher

I have a 13 month old Bosch SHE58c dishwasher. The pump runs constantly and will not refill the tank. There are no error codes thrown on the control panel, but not sure there are error codes for this model - the manual doesn't mention any. So I have removed the side panel and can see the bottom pan is bone dry and I made sure the overflow drain switch was not bound and operates freely. Is there some type of reset button or other task I can perform to continue troubleshooting this problem? Repair


I have exactly the same problem. Turn on the machine and it just pumps and pumps, door controls do nothing. According to the technician who came and looked at it the problem is a bad control board. He ordered the part and we are waiting on it. ... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Error Code E1 means longer inlet time. possible causes faucet is not opened, or water intake is restricted, or water pressure is too low, according to the BRADA portable dishwasher model EP9242AWW What does that mean and how do I fix it? I have shut the water faucet off and the error message still shows.


... Dishwashers

My bosch dishwasher model no SKS60E02EU is showing error code 14


... Dishwashers

My Bosch dishwasher, model SHE58C did not completely drain. We were eventually able to use the cancel cycle/drain procedure to get the machine mostly drained, but now all the lights are lit on the panel, and the count down display is 11. I haven't figured out how to reset. I have tried to hit "Cancel drain" and turn on the machine to get into diagnostic mode, but I can't figure out what the codes & light combinations mean because my model is not in any of the online sources I've found


I have managed to pick up typical diagnostic error codes for a bosch dishwasher - these are\015\012\015\0120 = No faults detected 2 = Heating fault 8 = NTC (temperature sensor) fault\015\0121 = Aqua Se ... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Have a hotpoint Dishwasher Model BFI620. The Eco light is flashing an error. Anyone know what this error code means?? Any help would be appreciated, cheers, julia


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Hi my Candy dishwasher model CDI 1012/2 is filling with water then after a few minutes if bleeps and the error code meaning according to the manual is "Longer inlet time. possible cause Faucets is not open" The tap is fully open and the dishwasher is now full of dirty water. Could you please suggest an alternative cause?


... Candy Dishwashers

My Bosch dishwasher model #SHX99A15UC control panel displays a "Delete Errors" code and will not allow me to adjust the Rinse Aid level. The dishwasher stopped drying the dishes when this problem started.


... Bosch Dishwashers

My bosch dishwasher wont dry. The model number is she44c02uc/47. I don't know what codes i need to see to get it to heat. I've tried to hold the cancel drain buttons in to change the code. I get a C1. what does that mean. Thanks for your help. john


... Bosch Dishwashers

Dishwasher LG Dishwasher Model LDS5811WW I have an error code LE, what does this mean?


The LE code indicates motor failure (or intermittent problem with motor). Based on what Ive read their support sucks, so sory to be bearer of bad news... ... LG 24 in. LDS 5811 Built-in Dishwasher

Bosch dishwasher model she error code


... Bosch Dishwashers

Diplomat dishwasher model ADP8332, error code F5, what does this mean?


... Dishwashers

What does the error code OE mean on a LG dishwasher model number LD14At3?


OE drain Error\015\012\015\012Not fully drained out in\015\012spite of 5 min. drain\015\012operation\015\012\015\012The Drain Hose kinked or blocked.\015\012Wiring connection is OK?\015\012The drain outlet of sump is\015\012blocked.\015\012The Drain ... LG Dishwashers

What does error code e05 mean - Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher


... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

I have a Bosch Dishwasher Model # SHU43C that is not washing properly. Some dishes are not being cleaned if we don't pre-scrub or rinse. There are no error codes on the panel. During the cycle I hear the pump motor starting and stopping repeatedly on about 1 second intervals. I suspect it may be starved for inlet water. I checked the inlet water line and it is clear. We use well water that occassionally has some iron sediment in it and it plugged the inlet water screen for our washing mach


Hi,\015\012It is very possible that the screen is plugged...most inlet valves have a screen just like your washer does. I would at least remove the hose/pipe and check the flow...and check for a screen. \015\012Also the solenoid can get j ... Bosch 24 in. SHU43 Built-in Dishwasher

Frigidaire dishwasher model#fdb4315lfb3 is giving error code "uo" in display...what does this mean? i installed a new board and did not correct problem


... Frigidaire Dishwashers

My one month old Bosch dishwasher Model SHE6AF06UC has and error code E-01. It was there when I came home. Can't find anything on this.


Think this means that your water pressure is not high enough for rinsing to be completed 100%. do you have low water pressure. ... Bosch 24 in. SHX99A15UC Stainless Steel Dishwasher

Hoover dishwasher model HED 6612/1-80. Has all lights lit up and beeping. Error code in manuel says "too much inlet water" What does this mean and how can i correct this. Thank you


... Hoover Dishwashers

Error code 01 on bosch dishwasher. what does this mean?


Error code 01 means interrupted heating phase or no heat on final rinse if machine is heating on beginning of wash this will be a blocked transfer hose or pressure chamber need to remove left hand side panel to access and base panel to access trans ... Bosch 24 in. SHX99A15UC Stainless Steel Dishwasher

My bosch dishwasher model shx45m runs for hours. It gets down to the last minute on the cycle time and then will not move on to the next cycle. The error code is 01.


... Bosch Integra 500 SHX45M0 Built-in Dishwasher

Hi i have a siemens dishwasher showing the error code F what does this mean ? ( model number is SE24030GB/17 )


... Smeg STX2 Dishwashers

What does the error code E01 for bosch dishwashers mean


My dishwasher e01cod show then turn off ... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1721 seconds