Having problems with your Bosch 24 in. SHV55M03GB Built-In Dishwasher ?

Top Wash Arm not Spinning

\015 Hi Model SHV55M03GB. Items in top tray are not cleaning properly. The top spinning arm is not revolving. Have checked filters and feed pipe to spinner. Spinner revolves freely.\015

Answers :

Water is not circlating, you need a circulation pump
Repair Help & Product Troubleshooting for Bosch 24 in. SHV55M03GB Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Frigidaire Ultra Quiet Plus dishwasher. The top spray arm isn't spinning during wash. The bottom spins fine and I can spin the top freely by hand. It appears there is not enough water pressure gettig to the top spray arm. Any suggestions? Tanks, Sam


I may have the answer. I had what sounded to be the same problem. I found the dishes were dirty after they were cleaned, but I found there may have been a big pot lid blocking the upper arm. I decided to run the machine again, and after a bit open ... Frigidaire Dishwashers

I have a Frigidaire UC DW Model FDB250RHB2 The unit is not a year old. It is not getting dishes very clean. I read similar posts. I found that there is water coming from top nozzle but not a very impressive stream. It is weak enough that most of the water misses the funnel on top rack. Also not top or bottom arms spin. Last week when i would quick peek during wash cycle there seem to be water coming out of top arm's holes but no spin. We also are getting heavy white staining on glass ware


... Frigidaire FDB520RH Builtin Dishwasher

I have a triton xl model @ gsd6200g00bb serial #va790400b. The dishes on the top rack are not getting clean. I have removed the top, and middle, and bottom arms cleaned calcium out of them. Removed the screen below the lower arm cleaned. The top and middle arms are still not spinning during wash cycles. Where do I go next?


Apart from the spray arms themselves there could be other reasons why the water is not getting up to the middle and top arms.\015\012\015\012The distribution circuit from the wash pump that feeds the arms could be blocked or the wash pump ... Dishwashers

I want to inspect filter on Whirlpool DU1055XTSS2, but can't seem to remove the lower wash arm assembly. The top of the lower spray arm hub just spins and spins.


... Dishwashers

- the dishes and glassware on the top rack are not coming out clean - I checked the course strainer to see if it is being blocked but don't see any thing there - I also took out the spray arm that sprays up into the top rack and ran water through it with a hose - it also appears to be free of clogs. - I don't see the spray arm spinning when I open the door during the wash cycle - - lastly, it may be unrelated, but the dishes are not coming out of the washer as hot as they used to be any i


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

Top wash arm does NOT spin, but is not blocked or hard to move by hand. Does this run off water pressure? Whatshould Itry next. I have already removed the filters and cleraned around the pump. The bottom wash arm works great.


Remove the dishwasher from the cabinet and look at the hose going up to the top. Make sure it isn't clogged and that there is nothing in the port where it comes out of the pump. The top arm is powered by water pressure from the pump. ... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

Hi, my hotpoint aquarius df61 makes all the noises of washing, i hear the water going in, motor is running, however i dont believe the spray arms are revolving, so the dishes are not getting clean. i have cleaned the individual holes in the spray arms, but i don't think the water is getting up the back pipe and into the top spray arm. it does not spin at all. no problems draining. help please. and were can i get a copy of the user guide, free preferably. thanks


How old is your machine? it is posible to have something in the watwr pump, you hear the water and the motor, but the fan of the pump (washing pump) is blocket. also the pipes hat make connection to the water pump and the arms. at someoane i found gl ... Dishwashers

Noticed dishes on top shelf not entirely clean. Ran machine empty and opened many times during wash. Noticed that Lower Spray Arm works as expected, but Middle Spray Arm turns only 1/8 or less, then Lower Arm spins again. Schematic with Use and Care manual just says pump motor switches from one to the other in certain cycles, but I don't see this happening. Looked for obstructions to water flow and pressure seems normal. Is control for this function part of the pump, or in the control panel?


Something could be in that checkball, see page 5 ... Frigidaire 24 in. GLDB653A Built-in Dishwasher

Top Wash Arm not Spinning


Water is not circlating, you need a circulation pump ... Bosch 24 in. SHV55M03GB Built-In Dishwasher

GE Quiet Wash 3, top arm does not spin


It sounds like you don't have enough water. Your water inlet valve may be not letting in enough water or the plastic pump inlet screen located on the bottom of your dishwasher had something blocking it. \015\012\015\012Chec ... General Electric Adora GHDA670N Built-in Dishwasher

Top wash arm doesn't spin.


Hi,This is usually due to restrictions from debris in the sump area of the pump, it will not allow enough pressure from the pump to spin the upper arms. I have put together some instructions on cleaning this on your model, follow the link ... Whirlpool DU1055XTS Built-in Dishwasher

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

I have a Kenmore Elite-not sure where to find the model number but the manual lists 665.160524, 1650594, 160534, 170524, etc. the problem is that the top dishes are not being washed. nothing is blocking the arm from spinning. Should water be coming down from the top? It doesnt appear that it is. Nothing seems to be reaching these dishes


Hello. The problem is most likely in the rear of the top drawer. Pull out the drawer and empty it of all dishes. In the very rear you will see a tube that will align with the water supply tube on the rear of the machine. there are little clips th ... Dishwashers

Hi experts! The middle wash arm in the dishwasher (underneath the top tray) does not seem to be spinning resulting in dirty glassware etc. I have checked the arm for debris which is clear and clean. The only thing I can think off is there is not enough pressure being pushed through the pipe from the back of the machine. Unfortunately I do not know where to go from here? Please help! Thanks Paul


Hello,Welcome to FixYa,Based on your description... I`d suspect a plugged or really dirty wash pump. It could ultimately be a worn out wash ... Dishwashers

The top rack will not wash i dont think the water is coming down from the top to make the arm spin with water and qash the dish


If you are mechanical, remove the dishwasher out to your garage or patio and clean out water channels or tubing. Depending on your skills you'll see they are simple machines. Basically a box, a pump, timer and solenoids. ... Dishwashers

I have a kenmore quiet guard dishwasher, model # 587.16252 400. It fills with water and goes through the cycles. The problem is the lower wash arm spins and shoots water, but the top arm won't. Any ideas?


... Kenmore 24 in. 16259 / 16254 / 16252 Built-in Dishwasher

Kenmore Elite Ultra Wash Dishwasher - top rack arm not spinning


Hi: I just posted a similar problem, but found a solution. After taking the arm, etc. apart (and verifying no blockages), I thought maybe the lack of water pressure was being caused by the fact that there are TWO holes for the top spray arm (higher ... Dishwashers

Hi I have a Blanco dishwasher BFDw8 which is having poor wash results in the top tray I have tried all the trouble shooting things in manual. Investigated further by opening door during wash cycle several times and discovered the top arm is not moving although water is still coming out of the arms. I did get a split pea particle out of the arm approx 2mm and have since had a mildly better wash and have used superior wash powder and rinse aid to try and help. Also have put a cleaner through di


\015\012\015\012Check the water temperature. Should be 125 to 140 F. \015\012\015\012Check pump re-circulation., Listen, see if it sounds like it is spraying the water around with enough pressure. ... Dishwashers

The top wash arm sprays water but doesn't spin. Can you tell us what to do?


... Maytag DWU9962 Dishwasher

After about 2 yeares, my Kenmore Ultra Wash 13713K Dishwasher suddenly will not get the dishes in the top rack clean. Nothing seems to be clogging the tubing, and nothing is preventing the upper arm from spinning.


... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

Top level glasses, dishes, etc are covered in gritty substance after wash cycle. Lower level all dishes end cycle sparkling clean. I have removed and rinsed upper water spin arm. Am also using a rinse agent and still have this problem. Bosch model SHE45M06UC/50.


... Bosch 24 in. SHU5305UC Built-in Dishwasher

Hotpoint hda300y my top wash arm does not move at all, and spins freely by hand.


See if any of the things in this thread apply:\015\012\015\012http://www.fixya.com/support/t2297203-spray_arm_doesnt_move_gsd5630d01ww ... Hotpoint 24 in. HDA300Y Built-in Dishwasher

Top spray arm does not turn during wash or turns slightly..it is free of clogs and spins freely by hand


It will spin freely by hand, but needs to spray water out of the jets at the trailing edge of the arm. Check inside the arm for blockage and make sure that water is getting to the upper arm from the pump. ... Whirlpool 24 in. DU1055XTP Built-in Dishwasher

My GE Profile dishwasher is not cleaning the glasses on the top rack. It leaves all kind of grit and food on the glasses. I did some testing and it lookslike the wash rinse/wash assemblies are not spinning at all. I think the conduit main may be blocked or leaking at the seal. My question is, how do you remove the track (conduit) that brings the water to the upper rinse arms?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Dishwashers

My lower rack will not clean bowls or cups and I have to be very careful how I place plates. The serviceman has been out twice and I have run vinegar through multiple times with no improvement. My top rack is working fine. I have tried running it on different settings and we have verified that the lower wash arm seems to be spinning. The temperature seems to be fine. Even glasses placed on the lower rack that weren't very dirty seem to have a scum in them when finished. Any ideas?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0735 seconds