Having problems with your Bosch 24 in. SHY56A05 Stainless Steel Built-In Dishwasher ?

I HAVE A BOSCH SHY56A I TOOK OFF THE FRONT DOOR AND TWO WHITE PLASTIC PIECES FELL OUT FROM THE BOTTOM OF DOOR AND CAN'T FIGURE WHERE THEY GO BACK NEED TO SEE DIAGRAM


Answers :

Hi,
Here's a page directly from the service manual...

5c384dd.jpg

Hope this helps!

SG







Repair Help & Product Troubleshooting for Bosch 24 in. SHY56A05 Stainless Steel Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I HAVE A BOSCH SHY56A I TOOK OFF THE FRONT DOOR AND TWO WHITE PLASTIC PIECES FELL OUT FROM THE BOTTOM OF DOOR AND CAN'T FIGURE WHERE THEY GO BACK NEED TO SEE DIAGRAM


Hi,Here's a page directly from the service manual...Hope this helps!SG ... Bosch 24 in. SHY56A05 Stainless Steel Built-In Dishwasher

BOSCH SGS6302GB I took the front door cover off my dishwasher and 2 clearish plastic grommits fell out from the bottom (each side) of the door. I cant see how they fit back in. Can you help me?


Hi nikkij\015\012\015\012 It is simple to put them back on. the plastic pices fit on the bottom of the hinges. there is a cut out where they fit in. when you look at the door at the bottom you will see the hinges and the cut outs, the ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

GSD4911X02SS leaks from the bottom. Opened the bottom cover to see where the leak is and it looks like it's leaking in two places. The leak is ont by the door. It looks like the leake is by the pump or motor dripping down. The diswasher still works, but the leak needs to be fixed. Also I have pictures if you need to see


... GE 24 in. GLD6200L Built-in Dishwasher

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Soap door on my Whirlpool dishwasher model # DU810SWKU0 does not open.I had inner door off to check rinse agent problem.Is there something i did putting inner door back on? If I close soap door and turn timer knob on outside of door the soap door will open after I make two full turns of the knob.If this cant be fixed can I just put soap in the bottom tray that has no door or put soap in both trays and do not close the soap door? Thank You RH.


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Door came off,need to see picture or told how to piu it back on


Http://www.par ... Dishwashers

I need the diagram for the door pulley system so I can make sure I am hooking it up right. The original door chord/pulley assembly broke. I ordered new parts, Now I want to make sure I am putting it back together the right way. The edge of the screw- on floor panel is pushing the plastic hook off of the door hook when you shut the dishwasher door.


... KitchenAid Dishwashers

Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help


... Dishwashers

Need to put back the lower spray arm and housing - need a parts diagram to see what goes where


What brand is it ... Dishwashers

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

The maytag dishwasher model mdb7130AWB stoped cleaning correctly so we went from the arm assembly in bottom of dishwasher down to the cutter disc and we found a crack in the housing so i ordered that piece. the new part was designed a little different but we put it all back together the way it came off. but it started and ran maybe 1 minute and stopped. so i have pulled up the diagram and see some problems. in the current diagram. original there was no part 37, 17 19 and 3, alos the crew d


... Maytag MDB7130 Dishwasher

Indesit idl535 dishwasher door is loose at bottom right hand side. how do i get to see if it just needs tighten a screw?


... Indesit 24 in. D63 Free-standing Dishwasher

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

Water leaking from bottom of door. Is there a gasket I can replace? I cant seem to figure it out. Also a link to a parts manual Thanks Dennis


Check under door, should feel a rubber gasket. sometimes it gets pushed up by silverware. on each side of the door you'll see a small bit of plastic from the gasket, give that a push down and close the door, should fix your problem. ... Dishwashers

The bottom spray arm screw seems to be stripped and just turns , so I'm having trouble removing it. This is the first time I've tried removing it. It is at least 5 years old, but the dishsoap dispenser didn't open this time so I figured it would need cleaning. What do I try now? What will happen if I can't tighten the screw back up. I've tried and it slips. Help Please.


... Whirlpool GU2400XTP Built-in Dishwasher

The door to my Kitchenaid dishwasher lost a spring. It will fall to the 100% open position. When you close it, the spring does not help it back up. Where is the spring? How do I get a diagram to see how to fix this? thanks.


The springs are located at the bottom of unit one on left and one on the right remove bottom cover and they are above the side railing...sometimes there is not enough room to access from the bottom and you actually have to pull unit out a few inches ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Dishwasher has stopped during programme - door may have been opened during cycle??!! - although cycle had only just started. bottom of washer has water in but cant seem to restart on ANY programme - pls help!!! have turned off at power and back on etc - no joy :(


... AEG 24 in. Favorit 80860iW Built-in Dishwasher

I can't figure out how the detergent timer lever attaches. It fell off before I got the panel of the door so I couldn't see how it was attached. If I had an exploded diagram showing how it attaches, I could finish the job.


May I get the make and model # to help you more ... Dishwashers

Need a diagram of how to put the lower spray arm witha tower back into the bottom of dishwasher Maytag model WU284


I think you are looking at item 1 in this diagram.\015\012\015\012Hope it helps. Please rate th ... Maytag Dishwashers

Hi My Bosh dishwasher is model SMU 7056UC The water is not out of the bottom of the unit, when the cycle is complete it is still cloudy. What do we do? What part number do we need for the door seal as it leeks ? I tried to down load the manual to see the parts and couldn't.


Hi \012either your dishwasher has a blocked filter or a blocked water outlet. Some dishwashers will reset if you can unblock the pump or outlet where it goes to waste. You will need to bail out the water first, then pull out all the filters and ... Bosch Dishwashers

I have a ge nautilus dishwasher and i took the door panel off. Problem is the spring popped off the timer and I do not know how to put it back so that the cup closes that releases the detergent. My wife is upset and I need some type of help. A diagram anything I am searching the net but to no avail. Please help. Derrick


Hello Derrick,\015\012I learned a long time ago that a picture is worth a thousand words and that before attempting any repair, I typically take several digital shots as a backup and in case I forget where things went. I know that won't help yo ... Dishwashers

I need to see how the bottom of the dishwasher model number part 154520101 is put back together please [email protected]


You can go to partselect,com and type in your model or part number and it will show you a diagram of exactly how it goes together ... Kenmore Dishwashers

Bought FSP door link kit 8194001 fo KA dw FUDSO1FL--need diagram


... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

I have a Kenmore Model 665.15955792 dishwasher. Water is leaking out the bottom of the door. I changed the door seal and the defusers but it continued. I took off the front of the door and I see the water filling into the base of the machine. When the dishwasher starts the cleam cycle, water is pushed up into the small square holes in the bottom of the door and then splashes up over the lip of the door and out onto the floor. It has never done this before, just started recently. I have had the d


... Kenmore Dishwashers

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1642 seconds