Having problems with your Bosch AQUATAK 115 PLUS Pressure Washer ?

My bosch aquatak is making noise - Bosch AQUATAK 115 PLUS Pressure Washer


Answers :

Repair Help & Product Troubleshooting for Bosch AQUATAK 115 PLUS Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My bosch aquatak is making noise - Bosch AQUATAK 115 PLUS Pressure Washer


... Bosch AQUATAK 115 PLUS Pressure Washer

Using a Bosch 1600W Pressure washer Aquatak 110 plus Was adjusting the twist pressure sleeve to get HIGH pressure and water supply stopped and sleeve seems fixed/seized. I turned power ON and OFF and turned water tap ON and OFF but still no water coming out of the nozzle. What do I do now?


... Pressure Washers

I have a Bosch Aquatak 115 plus pressure washer that has a blockage on the inlet. I suspect some small particle in the water supply has caused the problem as it occurred in the middle of a job. I want fix the problem and and add a filter.


Need to clear out your total inlet system and flush the pump out if needed and install either inline filter or screen ... Bosch AQUATAK 115 PLUS Pressure Washer

Bosch aquatak go plus leaking - Pressure Washers


... Pressure Washers

Bosch aquatak 100 plus pressure washer instruction manual


... Pressure Washers

Bosch aquatak 150 pro - Bosch AQUATAK 150 PRO X Pressure Washer


... Bosch AQUATAK 150 PRO X Pressure Washer

I have a bosch 110 plus pressure washer the problem i have is i turn on washer squeeze trigger and works fine when i release trigger and press again it wont work and trigger seems to have pressure on it


... Bosch AQUATAK 110 Pressure Washer

HI I am Shashi, After switching on the Bosch Aquatak 150 pro pressure washer, inital starting sound is not stopping, and machine is not able to output any water


... Pressure Washers

We have a bosch aquatak click 125 pressure washer. Could you tell us how to rewind mains cable into machine, normally it goes back on its own. Thanks


Try pulling it towards you and then letting go. Sort of like an old vacuum cleaner cord. It will probably click and then retract. ... Pressure Washers

Pressure washer gradually loses pressure


... Psi PowerBoss 20262 Pressure Washer

Bosch pressure washer


... Pressure Washers

I have a G2500VH pressure washer that has started to pulse when the trigger is squeezed. This happens if I use the 0,25, and 40 degree nozzles BUT if I use the one for low pressure(detergent use) it will hold pressure fine. I have changed the unloader valve, checked all the valves and seals ad they seem to be fine. What could be the problem?


Do you mean pressure on and off with the hp tips and smooth and steady with chemical tip? ... Pressure Washers

I have a bosch aquatak 1300si the pressure has dropped off considerably.It usedto cut out automatically when it reached operating pressure and only cut in again once you started to wash ,now it runs constantly but does not achieve enough pressure to wash effectively


... Pressure Washers

Honda pressure washer model # exhp3640-1 3600psi 0=13hp has low water pressure out of triggers motor does not engage for higher pressure


... Pressure Washers

Bosch SHU43C My Bosch SHU43C is stuck with the drain pump running. I ran the self-test and it gave me the fault code 4 wich indicates a filling fault. The washer is empty and all wash cycles display the correct number of minutes for the cycle. It counts down to 0, but the pump continues to run. Does this indicate a stuck float, or is the problem with the control board? Where is the float located? Are diagrams/pictures available on-line anywhere? I've done some searching, but haven't found any. R


My SHU43C is just over 3 years old. I had a similar problem recently. First, there were a few floods. Then, the Bosch only drained non-stop. Even when I used the Cancel Drain buttons the drain pump would run without stopping. When I ... Bosch 24 in. SHU43 Built-in Dishwasher

Hello there.My Karcher pressure washer motor constantly runs with no pressure coming out of trigger gun.I have tried another gun with the same result.The motor should stop/start when you press gun.The model is a 350M plus VPS. Could you please help.thanks


The valve that admits more water to be compressed is stuck. It is likely the O-Rings on it need replacing. No water to the pump, no pressure!\015\012\015\012The motor will stop when pressure is up to the designed pressure. ... Karcher Pressure Washers

Hi there I have a Bosch SGV4313GB/17 Dishwasher the problem is there insuffient water pressure to feed the washer arm and they are not rotating Ihave cleaned the arms and circulation pump impeller with white vinegar ,I have also overriden the door switch and operated the dishwasher with arms removed and the circulation pump seem to be working but with insuffient pressure also the machine does not fill to the depth it did when it was fine! How does one tell if it is the impeller or the


Ours is a SHU3300UC/06 model, basic model which we bought in 1999 so have had 9 years of trouble free service.Recently\015\012we noticed that there was soap left in the soap dispenser after the\015\012machine had finished all the cycles. On fu ... Dishwashers

I have a Bosch dish washer model SHX 43 M 0 ZUC / 48 FD 8709 00169 The dish washer is about 1 1/4 years old and was installed by a plumber as part of a Home Depot kitchen remodel. The problem is draining. The quick wash does not drain at the end of the wash. The regular wash sometimes drain and sometimes does not. The auto wash does drain. The lack of draining does not cause problems with the regular wash cycle. I checked the drain hose re the instruction manual and it is correctly installed.


Usually a brush with a flexible shaft will do the trick...\015\012\015\012Like this venturi tube cleaner (available where gas grills are sold)\015\012\015\012 ... Bosch Dishwashers

I have a Karcher G2600 OR Pressure Washer, 2600 psi, 2.5 gpm. PN 1.194 506 0. gas engine works fine and water flows fine but pump is not adding pressure to stream. Checked and cleaned inlet water filter.


... Pressure Washers

Can i run plus gas in my washer - Northstar Pressure Washer 3000 PSI


I'm not sure what you mean.I think you are asking if your power washer needs oil mixed with the gas.Does your machine have a oil reservoir below the engine?If there is a place to put engine oil, then your engine runs on ordinary gas ... Northstar Pressure Washer 3000 PSI

My Bosch pressure washer has power and the water is flowing through the machine, but no high pressure?


It would take a small book to explain how those things work but I'll try to cut it down some. Most have three pistons in the bottom of the pump that are operated by a cam that looks like a wavy pancake. As the waves pass over the spring loaded pumps, ... General Pressure Washers

Bosch Aquatak Clic 125 running problems - keeps pulsing and unable to reach continuous full pressure - has been working well up to now - water pressure OK


... Dishwashers

Bosch pressure washer


... Bosch Pressure Washers

Bosch aquatack 110 pressure washer , keeps blowing my hose attachement off ?


... Pressure Washers

Bosch aquatak high pressure switch


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0791 seconds