Having problems with your Bosch Dishwashers ?

Bosch Aquasensor - water not heating up? What do we need to fix? We do not know where the element is located?


Answers :

Hi - thank you for your assistance, but I've deciced to contact a local technician to help me. I read on your forum that it is a difficult process and do not want to take the chance of messing it up completely.
\015\012Rather let the experts do the job!
\015\012
\015\012Thanks in any way!
Repair Help & Product Troubleshooting for Bosch Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bosch Aquasensor - water not heating up? What do we need to fix? We do not know where the element is located?


Hi - thank you for your assistance, but I've deciced to contact a local technician to help me. I read on your forum that it is a difficult process and do not want to take the chance of messing it up completely.\015\012Rather let the experts do ... Bosch Dishwashers

DWF614SS not heating water, flow through heating element has been replaced and tested but still no hot water. Do I need to check the thermostat, if so, where is this located? Thanks for any help with this one. Owen.


... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

I have a Bosch Classixx SGS43CO2GB which is working but not heating the water or drying? Is this something I can fix myself, and if so where could I get another heating element? THanks


... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Our SB915WJ doesn't heat water though the heating element is ok, I checked with my multimeter. Is there a mains relay or something i need to change in the circuitry to fix this problem? Does anyone out there have a service manual you can email me? Also the fan drier isn't working, also the relay that is supposed to flip open the soap dispenser doesn't work. The unit is only eighteen months old. I'm not impressed with it's working life.


THERE IS A HIGH TEMPERATURE CUT OFF SWITCH WHICH LOOKS LIKE THE BAK OF A STAINLESS STEEL WATCH IT HAS TWO LUGS THAT THE HEATER ELEMENT IS ATTACHED TO. IF YOU TEST IT YOU WILL FIND THAT IS IS OPEN CERCUIT. I'M NOT SURE WHERE IT IS ON THAT MODEL BUT ... Westinghouse Dishwashers

Hi My westinghouse virtuoso does not heat the water any more and i wan to know were is the heating element located please


If you want to see all the parts you can go to searsdirectparts.com and put in your model # and you can view every part and location of your machine.let me know if this helps. ... Dishwashers

Hello, Firstly, thank you for what you do, you help so many people and I know it takes time. I have a Bosch SHE44C06-UC Dishwasher. I fixed the E1 (Heating Circuit) error. First, before I found the writeup about the solder joint, I bougut a new heater and replaced it, ithe part included the element, flow switch and high temp sesor soall are new, then I fixed the solder and E1 went away and the cycle finsihes and the dishes are clean and dry. Still I check the error codes and still have


... Dishwashers

My PDW9280LOSS GE Profile diswasher runs and cleans fine. However, the high heat(sanitize cycle as well) does not finish ther job. A while back I changed the element due to hard water damage. I beleive I need a control module and I need to know if there is any sequence to reconnect for reprogramming (the new one)it? Or anyother ideas? Thanks


Hi,Before replacing that module I would check for power at the element first to confirm that there is no power....coming from the module...As far as the change out goes... just make sure the power is off when changing... then ... GE 24 in. PDW9280LSS Built-in Dishwasher

Fills with water, sounds like it starts to pump water then stops, then start again. It attempts to start pumping water 3 or 4 times them turns off leaving the water in the tub. I have read about the water needing to heat up for the cycle to advance. When I check the water that is left in the tub it is warm but not hot. The heating element is not hot either. I did a continuity test on the heating element and it seems to check out ok. I also did a continuity test on the red wire from the heating e


You have a wash pump problem. can be 1 of 3 things. most likely something is caught in the pump impelor if not the wash pump motor may be faulty or ceized or it could be the capacitor for the wash pump motor is faulty. you can try removing the wash p ... Maytag MDB7100AWB Dishwasher

I need a heating element (i think) for my whirlpool quiet partner 1 dish washer, but i need the model number and I dont have it with me, do you know the part number for the heating element that I need or do I have to know the model of my dishwasher? it started with DU and was either DU1100 something or DU1050 something?


Your Whirlpool Quiet Partner 1 should have its model number inside along the left side. Mine is DU1010XTXT1. Your heater part is original Manufacture # W10518394. Can be purchased for about $38.00 at \012 ... Whirlpool Dishwashers

I just replaced the heating element and it was working fine for about a week. Yesterday, the soak and scour light (which I've never even used) started blinking constantly. The dishwasher, Model GU2400XTPB3, won't let me even enter the reset code. I need to know if it's something we can fix without paying for another part/service by finding a manual. Thank you.


... Whirlpool Dishwashers

I have a Chef Classic dishwasher ( model B8913WW) which is no longer heating the water, I assume I need to replace the element but nobody in my area knows where to get parts for this make or model, any ideas please??


If you know how to use a multimeter you can get to the heater connections and check the resistance of the element. it chould be about 26 ohme. Also the over heat protector thermostat should measure zero ohms. Make sure all wires connected to the heat ... Dishwashers

My Bosch SHI4306UC dishwasher will not stop running in the rinse mode. I was wondering if it will not advance because the heater is not working well enough to increase the water temp to complete the cycle. Is this most likely the heating element and something that can be fixed by a homeowner? Thank you for your help, Steve


... Dishwashers

Need to know where water value is located - Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher


Valves are generally fitted inside the cabinet & close to to the water inlet ... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

I need to know how to fix my dishwasher. It's a portable Maytag. older. Not sure how old. It will fill up with water and heat it up, but it gets stuck there and will not wash the dishes.


Hi.If the machine fills and heats up the water, but does not proceed any further in cycling , that means that the timer board did not detect that the correct temperature has been reached.The machine keeps heating or filling wa ... Dishwashers

Bosch Dishwasher My 8 year old Bosch is not draining. It will not go past 1 minute on the rinse cycle, and 13 minutes on the regular cycle. For the past few weeks I have noticed a lot of bubbles in the bottom of the dishwasher after it is done, but it was draining. Now it's full of water and will not go past the 1 minute mark. I need to fix this, I can fix this, I just need some expert advise on how to do this myself. Thanks!


What is the model #?... there are 2 buttons when pushed together it will drain the water out..try the button to the left next to power scrub... and economy...hold the 2 buttons for 3 sec. you will hear you drain pump running.. if you don't hear any ... Bosch 24 in. SHU43 Built-in Dishwasher

Bosch dishwasher (SXH55MO6UC/46): The power comes on and runs normal, but no water is coming into the unit. I was told that it was a water inlet valve that needs to be replaced (part #263833). I need to know if this is what needs to be replaced and if so, is this something that I can do or do I need an expert repair service to do it? If it is something that I can do, I need instructions. I am handy, but this is something that I have not done before, Thank you, Craig Covey


Hi Craig,Yes it may be the fill valve...but first take off the pipe or hose and check the screen just inside the fill valve...some do not have it but most do...also check that water comes out of the hose or pipe at the valve....THEN ... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

Hey, bosch sgs43a18gb/27 dishwasher not heating the water and hence the cycles take ages. ive read that plugging it into the hot water feed is not recomended, so is there a fuse on the element i can test? if not im assuming the element has gone in which case the washer is scrap as an element is £100 cheers


Hi,OK there is a NTC (temperature sensor) which is near the heater in the sump unit.Meter it out and check the wiring. You should get a reading in Kohms.But to be honest i have never replaced 1 of these on these m ... Dishwashers

Yes I have a whirlpool DU1345XTVB1 dishwasher. Just got in July. After each wash cycle the dishes are not dry. I have been using Finish gelpacs w/jetdry & also have a off brand drying agent in reservior to help dry dishes. The water temperature is set pretty hot & washer is draining good. I have tried checking wash cycle a few minutes into 1st cycle to see if water is in filling & heating. Didn't know if maybe heating element going out or thermostat not working? Thank you for your time.


<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-language: EN" lang="EN">Hi,<br />Check your heating element.. </span><br />\015\012<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-lang ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

I need to change the heating element in my Kenmore Elite Built in Dishwasher and don't know how to get the old heating element out


Disconnect\015\012 the power source to your dishwasher before you conduct this or any \015\012other test. Either unplug the unit from the wall outlet, remove the \015\012appropriate fuse from the fuse box, or flip the appropriate breaker in \015\012t ... Kenmore Dishwashers

Beko dwd5410w dishwasher. It's stopped filling with hot water and I need to know how to strip it down to investigate. Need to know where the PCB located as heard this suffers from dry joints. Thanks guys


... Dishwashers

I have a Beko DE3542FS dishwasher which has stopped heating the water. I know the heater element is ok because I have had it tested. I was wondering if the thermostat was faulty if this would account for it not heating. The element has had 240v applied and becomes hot. So my reasoning is that it is either the thermostat or the programmer. Any suggestions?


... Dishwashers

My dishwasher does not do a hot wash. Why is this? If I need to replace the heating element, how do i gain access to heating element on my Bosch classixx dishwasher?


Hi, a common problem with these machines is the solder coming away from the heater relay. A simple repair if your lucky. Run a continuity test on the element with a multimeter before replacing it, as it is a massive job to change it. I just changed m ... Bosch SHU9950 Dishwasher

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Not getting enough water flow into the dishwasher, suspect that a filter is clogged due to recent work on the waterline in the kitchen sink. Need to know where the filter might be located (on the dishwasher or on the intake valve before the connection to the dishwasher hose)? Also would I need to disconnect the water supply to pull out the dishwasher for access to such a filter.


You didn't specify a brand but most dishwashers don't have a water "filter." They may have an inlet screen at the water valve, which is typically located under the dishwasher. Generally, the lower front panel will have to be removed and you should ... Dishwashers

It went thru the whole cycle and when I opened it up - there was water still left in the bottom - hit the cancel/drain button and nothing happened. Unhooked the drain line to the drain pipe under the sink and no water came out. How do I find out if it is the pump ? If I take it out - what do I need to look for and what trouble shoot things do I need to know. I live about one hour from the nearest town - so I would like to find out the problem - before I call a repairman and maybe fix it myse


... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1990 seconds