Having problems with your Bosch Dishwashers ?

I have a Bosch SHU033A diswasher that is not draining. I have checked the lines but cannot figure out how to get to the drain pump. I have turned on its back but there seems to be no easy way to get the large white plastic bottom removed so that i can access the pump.


Answers :

Hi\015\012\015\012\015\012

\015\012\015\012Thanks for using FixYa. First check whether the drain is not clogged or blocked and\015\012the line is not kinked. Check all the hoses for blockages & also clean the\015\012air gap. If you have checked the air gap and\015\012the drain hose and can’t locate the problem, then it is an issue with the drain\015\012pump of the dishwasher.

In a Bosch SHU033 Dishwasher Drain pumps are mounted to sumps in the front of dishwashers\015\012--they’re easily accessible from the front of dishwashers by removing toe kicks.\015\012To remove & install drain pump:
\015\012\015\012
\015\012\015\012Tools needed: small flat blade screwdriver (for unlocking\015\012terminals).

\015\012\015\012•Remove toe kick/base cover, pull up terminal cover and\015\012disconnect wires (using screwdriver to unlock locking terminals).
\015\012\015\012•To remove pump, pull latch (on circular collar) &\015\012rotate pump clockwise (cw). To install new pump, insert @ 2:00 position &\015\012rotate counterclockwise (ccw).
\015\012\015\012•Clean water & debris from base, then check float operation.
\015\012\015\012•Connect wires, then install base cover & toe kick.
\015\012\015\012

\015\012\015\012Please do accept the solution if the issue is resolved or else revert for further assistance.


\015\012\015\012Thanks
\015\012\015\012
Rylee
Yeah, there really isn't an easier way. The bottom isn't sealed, it just will take a little force to get it out after you loosen everything up, simple as that. You can only remove the drain pump by removing the bottom. You can order a new pump from repairclinic.com. Let me know how this works out for you. Benjamin
Repair Help & Product Troubleshooting for Bosch Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Bosch SHU033A diswasher that is not draining. I have checked the lines but cannot figure out how to get to the drain pump. I have turned on its back but there seems to be no easy way to get the large white plastic bottom removed so that i can access the pump.


Hi\015\012\015\012\015\012 \015\012\015\012Thanks for using FixYa. First check whether the drain is not clogged or blocked and\015\012the line is not kinked. Check all the hoses for blockages & also clean the\015\012air gap. If you h ... Bosch Dishwashers

My dishwasher siemens se25a266gb purchased in 2003 will fill with water go through a wash cycle but does not pump out the water i have cleaned out the filters, checked the exit hose and all seems ok the only way to get the water out is bale out by hand. after this it will run through a wash cycle then stop and not pump out. how would i get to the pump and check it? any help appreicated regards Alan


\012Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Bosch sgs45 The unit take in water but then tries to pump it out every 10 seconds. Checked the drain pump from above and below by removal - all clear. There is a large clear plasic container which seems to be the salt reservoir. This seems to have food residue in it. Any ideas on the way forward would be appreciated


... Bosch Dishwashers

I have a D3100 that continues to pump out. None of the controls seem to do anything, the only way i could get it to stop was to turn of the power point.It does not reset as when i turned on the power point again it started pumping again.


The flood switch has turned on at the base. This means either the switch is faulty or water has leaked into the base of the housing. ... Asko Dishwashers

My LG dishwasher upper rack has stopped cleaning. The uppermost arm is seemingly getting no water at all and the arm on the underside of the upper rack is getting some water, but not enough to turn it. I have already disassembled and cleaned all the way down to the diverter assembly and it has not fixed the problem. I think this is a problem with a the (?) diverter pump or perhaps a sensor that sends water to the upper arms. I am trying to figure out how to further diagnose the problems. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... LG LDF6810 Built-in Dishwasher

Won't drain The water won't drain away, I have the top off and the spinner spins easily, but I can't seem to remove it. I have the screw driver trying to turn it while holding the 1" nut, I don't know if this is the way to get to the bottom of the pump. Its a kenmore fh3726568. built in.


Hi,\015\012Please follow the steps provided bellow :\015\012Fill washer with water and wait for the timer to get to the drain mode. \015\012Unplug the washer from the electric outlet. \015\012Open the case, and disconnect the ... Kenmore 24 in. 15689 Built-in Dishwasher

I have a Whirlpool DUL300XTLQ3 Queit Partner III. The cleaning blades stopped moving-started it-waited awhile-opened it-the blades were in the same position. Took the bottom blade+filter cover off. Then I held down the metal piece on the case and switched on the micro switch on the door to see it running with the door open. The water shot straight up about 4-5" that's it. This does not seem to be enough pressure for the water to get all the way up to the top spinner. Am I looking at a new pump


If there is not enough water, the dishes would not get cleaned. Thiscould be caused by a partially closed water shut-off valve (locatedunder the sink), or a faulty dishwasher water valve (located at thebottom of the dishwasher, behind the kick panel, ... Whirlpool Dishwashers

My viking dishwasher is not getting the dishes clean in certain areas of the dishwasher - they come out with food still on and/or greasy residue still left on. There is a white residue on alot of the glasses. Seems like it might be calcification - any way to clean the dishwasher to break down any calcification? might also be that water is not heating - how to best determine that? email is [email protected] and phone is 540-316-1263


Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... Viking VDB450 Dishwasher

Top "spinner" has some water flow but doesnt spin. Doesnt seem to be enough pressure to get it moving, would the pump be on the way out , i have checked all holes for blockage and also ran some cleaner through machine.


Hi,That problem can have many and varied solutions...I have tried to put together in this tip the most common and easiest to checkout problems. For many of the spray arm problems the ... Asko D1776 Stainless Steel Built-in Dishwasher

It leaves about an inch of water after finishing, Hoses seem clear but the pump seems stiff to turn when i take out the filter, how can i get to the back of pump to clear it. do i need to turn the dishwater on its side to get access to it underneath


I WOULDNT TURN IT ON ITS SIDE IF IT HASNT FULLY EMPTIED. I WOULD TRY A DILUTED SOLUTION OF Mr MUSCLE DRAIN UN-BLOCKER. THEN RUN ON A FULL CYCLE STRAIGHT AWAY. ... Dishwashers

Hi I went away on holiday and my dishwasher AEG 50800 was in perfect order. When I came back after three weeks it does not work. It was not in use while I was away so I don't get how come it is not working now .It does start up but its like the pump is just not kicking in. Ihear water running but the blades dont move and nothing seems to get washed, any ideas. Or is a new expensive pump my only option? My Husband seems to think a seal might have gone. Can a seal go while not in use? Thanks


It's worth looking under the machine. There is an overflow area with a float switch which sometimes fills up and it stops it working ... AEG Dishwashers

Siemens dishwasher won't drain all the way, pump seems to keep running


... Dishwashers

Whirlpool dishwasher does not pump all the water out of the basin. How do I get to the pump to clean the debris out. It seems impossible to get to the pump from inside the tub.


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...Dishwasher Problems - Water will not drain out ... Dishwashers

Have a Whirlpool Model GU1200XTLQ3 that makes this God awful noise when running. Did what your post said about cleaning the chopper and found glass. Replaced it back and I'm still getting the noise. Is there a way to check the pump from inside. In other words, if I take the chopper back is there a way to check out the pump


... Whirlpool Dishwashers

Poor washing The soap door opens but soap still in there after wash cycle. We got lower spray arm off and one plastic piece but can't get all the way to the pump. Pump appears to possibly be cracked so we suspect it needs replacing, but we can't get it out.


Before you suspect the pump and motor assy, do you hang the silverware basket on the front side of the lower rack or if not did one of the holders for the rack fall off and you replaced it? I have found that id the basket is hung on the rack that tal ... Whirlpool 24 in. GU1500XT - Multiple Color Built-in Dishwasher

I am not happy with the racks in my new Bosch dishwasher! The bottom rack is not right! The silverware basket is in the back right corner and the silverware catches on the seal on door and it is hard to get to. The tongs are two close together and point the wrong way? The upper rack's tongs are also to close together also. I don't seem to be able to get larger dishes in with these tongs in the way. Having never used the mdl 9000359119 Rev B I had no idea. Buying a Bosch ment quality to me


... Bosch Dishwashers

My Maytag Quiet Series 100 is leaving a white residue on dishes and glasses. The problem seems to be getting worse. I have used multiple dishwasher cleaning solutions, with no resolution to the problem. My glasses have what seems to be permanent white residue on them and the plates are now showing the same residue. What can I do to solve the problem?


<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-language: EN" lang="EN">Hi,<br />Check your heating element.. </span><br />\015\012<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-lang ... Maytag 24 in. MDB5651A Built-in Dishwasher

The unit goes through its cycles but the top rack is not getting clean. The bottom spray wheel works, the middle and top spray arms are getting water but it seems not enough to make them rotate. The pump screens are clear and there seems to be enough water. Whats going on?


The problem is likely to be that the jets in the rotor arm are blocked.\012\012To check this, remove the arm (it is easy to do, as it is intended for the user to do this) and clean out all the holes. Try running water from you tap through ... Dishwashers

Dishwasher is not cleaning well, dirty film all over everything, like its not rinsing. In rinse cycle only, some water comes out of lower left port inside but nothing else. Hear a low buzz underneath unit like a motor or pump is energized but no water getting to the top.During normal wash cycle, buzz from underneath seems to cycle on and off, say every minute or so like its cycling on an overload. Do I have a bad pump and if so how do I get to it?


Hi. This may well be a pump issue, or an obstructed hose assembly, as well. Your symptoms are indicating that the impeller may be damaged. In order to pull the necessary schematics, I will need the entire model number. This ID tag will allow me to pu ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

Water stopped pumping so ordered new pump. Upon removing the old I discovered it had a few straws twisted up into the pump. Removed and reinstalled pump and it sounds great and throws water all over with force. PROBLEM: Now there is ZERO water coming through top tube to spray arm. Pulled pump back off and noticed what seems to be a "white diverter ball" that moves a little in front of the inlet for the upper water tube. Any guidance to where the ball should be prior to installing the pump


... Kenmore 15529 Built-in Dishwasher

Water stopped pumping so ordered new pump. Upon removing the old I discovered it had a few straws twisted up into the pump. Removed and reinstalled pump and it sounds great and throws water all over with force. PROBLEM: Now there is ZERO water coming through top tube to spray arm. Pulled pump back off and noticed what seems to be a "white diverter ball" that moves a little in front of the inlet for the upper water tube. Any guidance to where the ball should be prior to installing the pump or i


... Kenmore 15529 Built-in Dishwasher

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl


... Northstar Pressure Washers

Water stopped pumping so ordered new pump. Upon removing the old I discovered it had a few straws twisted up into the pump. Removed and reinstalled pump and it sounds great and throws water all over with force.rnPROBLEM: Now there is ZERO water coming through top tube to spray arm. Pulled pump back off and noticed what seems to be a "white diverter ball" that moves a little in front of the inlet for the upper water tube. Any guidance to where the ball should be prior to installing the pump o


... Kenmore 24 in. 16193 Stainless Steel Built-in Dishwasher

No pressure Gas powered pump is a radial type from DeVilbiss. There is very low pressure, although there is some pulsing from the pumping action. There are no leaks and the supply pressure is good. Pump pistons are in good condition. They seem to be pumping when I had it disassembled and operated by hand. I suspect it is something in the bypass or unloader. Or it may be in the ''easy start'' assembly which I assume reduces backpressure on the pump when starting the engine. Pump has a temperatu


... Pressure Washers

Whirlpool dishwasher doesn't seem to fill with enough water despite good water pressure. Therefore, pump sounds like it is cycling from pumping water for about 2 seconds to going dry for 2 seconds to pumping water for 2 seconds to going dry for 2 seconds, etc. Spray arms rotate only for the 2 seconds when pump is actually pumping water. Dishes do not get clean.


... Whirlpool 24 in. GU2548XTPS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1372 seconds