Having problems with your Bosch Dishwashers ?

For a Bosch she44co7uc/36, the timer gets down to 1 minute, it keeps on running inside. Any advice would be much appreciated


Answers :

Hi
\015\012\015\012
\015\012\015\012Thanks\015\012for using FixYa. Check the water temperature by using a thermometer\015\012inside the dishwasher to measure the water temp. It should be as close to 125\015\012degree F to 140 degree F as possible.
\015\012\015\012
\015\012\015\012This would have happened as the\015\012dishwasher was overloaded with more than prescribed number of dishes. Check the\015\012spray arm and pump cover for splits or leaks. As the dishwasher\015\012is not draining properly, this issue is related to kinked hoses, knocked out\015\012disposer unit (if connected with the dishwasher drain hose) & clogged drain\015\012pump & filter.
\015\012\015\012
\015\012\015\012Also note that dishwashers do not drain\015\012completely after a finished cycle and this is normal. Dishwashers are designed\015\012to leave some water in the unit to ensure that the heating element doesn’t\015\012overheat. If you suddenly begin to experience a large amount of water being\015\012retained in your dishwasher, you have a problem. Some of the most common\015\012reasons include that the drain hose isn’t working properly, the drain pump\015\012isn’t working correctly, or possibly there is a plumbing problem in your home’s\015\012drain lines. If you have checked the air gap and the drain hose and can’t\015\012locate the problem, then it is an issue with the drain pump of the dishwasher.
\015\012\015\012
\015\012\015\012Please do\015\012accept the solution if the issue is resolved or else revert for further assistance.
\015\012\015\012
\015\012\015\012
\015\012\015\012Thanks
\015\012\015\012Rylee
This seem normal as mine does the same and the dealership says it's alright.

Worry less dear.

Cheers
Repair Help & Product Troubleshooting for Bosch Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

For a Bosch she44co7uc/36, the timer gets down to 1 minute, it keeps on running inside. Any advice would be much appreciated


Hi\015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Check the water temperature by using a thermometer\015\012inside the dishwasher to measure the water temp. It should be as close to 1 ... Bosch Dishwashers

All of a sudden, my Kenmore dishwasher (Model 363.1411691) will not cycle. When I lock it shut and try to set it to wash, all I hear is a click--no motor running, no water sounds. As I advance the timer knob, I just get clicks where each cycle should begin. There is standing water in the bottom of the dishwasher which does not drain out. Any advice would be much appreciated, for sure.


Hi.The clicks are simply the relays in the timer board that try switching on. The control module is likely working.The cycle does not start because of a different problem.If no light is coming on, then ensure that wall socket ... Dishwashers

Hi there. i have a hoover hd72 m dishwasher and until recently it has been fine. now tho,when running the machine it just seems to keep on filling up with water and consequently leaks from the bottom of the door. i can drain it manually by twisting round the programmer.any ideas guys. any help would be much appreciated. xmas is coming!! cant rtelly afford a new one yet. thanks


... Hoover 24 in. HD72M Free-standing Dishwasher

Drain problems I have a Kenmore 665.17292992 portable dishwasher. I've changed the filter and the seals however it still does not want to drain. It will drain but extremely slowly and since it's on a timer, it only drains maybe 10% of the water out. My next step was/is going to be the Check Valve... but I am at a loss right now. I thought for sure it would be the filter. Any advice would be appreciated. Thanks, PM


This may not be the solution, but look for an air in-take somewhere on the top/back of the unit. It's probably covered by a stainless steel cover that can be taken off. Unscrew this cover and see if the air intake is blocked with lint. This is usua ... Dishwashers

Maytag dishwasher model MDB7609AWW2 has a blinking clean light. I followed the advice on fixya (thankya!) and by alternating the normal and heated wash buttons I was able to return the lights to normal. However, once I tried to run a normal cycle, it didn't do anything other than fill and drain. I then ran the hot water faucet in the sink until hot and tried another new cycle, but no luck. Any advice is MUCH appreciated!


... Dishwashers

Hello, have a hotpoint LFT114 dishwasher that doesn't seem to finish a program. After approx 30 mins any noise has ceased (indicating the program has finished) & upon opening the door, the washing tablet has not been taken, nothing seems clean inside & the POWER & ECO LED's flash rapidly. Any ideas would be much appreciated! Thanks, Karl


... Hotpoint-Ariston LFT 228A 23 in Builtin Dishwasher

I am trying to fit an outer door to my Neff compact built in dishwasher. I have the correct fixing kit, but it comes without instructions and I have been unable to source any. Any advice or guidance would be much appreciated. Richard Hine


See this videos:God bless you ... Dishwashers

Smeg e2 error (water level tripped). Filter is clean and no rubbish below filter on inside of dishwasher. I have taken the front panel off but am not sure where the float device is located - I am wondering if it is just to the left of what looks like a solenoid. There is no water in the base of the unit in the front panel so would rule out any leaks. Reset program and turned off power at socket but still not using hot water. Possible PCB issue ? Any advice appreciated. Smeg DI612C Dishwasher.


... Dishwashers

My Bosch SHU9915UC dishwasher will not power on. Any advice would be much appreciated?


Hello, ... Bosch SHU9915UC Dishwasher

CDA dishwasher model CW445, keeps draining will not run through cyscle as it thinks it needs to drain! Constantly making a "gargling" noise if I manually fill with water cysle starts but system drains water again, any help would be appreciated?


Ours did the same....last week. Would not work for a few days...in the end i took the spinning rotor arms off that spray the water. The nozzles looked blocked ...used tootbrush to clear nozzles. Put arms back on and it is now working. Wife thinks we ... Dishwashers

Hello I am having problems with my dishwasher. Model BFDWC60ss. The detergent compartment doesnt doesnt empty after each wash so the dishes are still dirty after a heavy cycle. I have checked the filters and they seem ok. I would be grateful if you can give me some advice. Much appreciated Mary


... Dishwashers

Kenmore dishwasher Food particles left on dishes and inside of dishwasher. All functions appear to be working normally. Water pressure OK, drain OK, water temp OK, Etc. Operating dishwasher though a normal cycle without dishes solves the problem for one load, then back to problem. Dishwasher is about 5 yrs old and worked perfectly for 4 yrs. Any advice would be greatly appreciated. Bruce


... Kenmore 17822 Free-standing Dishwasher

My Frigidaire is old, at least 15 yrs. Model # fdb635 or #fdbc45 , it is 29 x32 1/2 The detergent dispenser does not open. When I open the door and manually open it still does not wash right. Cups and glasses are not clean on inside, and leave spotting on glasses and other dishes. I'm not sure of my timeing of opening dispenser door. This is a white dishwasher. High energy . I do not have a manual to refer to I would appreciate your advice.


... Frigidaire Dishwashers

Our machine is from ikea DWH B00 The machine runs for about 30 mins then begins to beep and will not wash any more we then have to put it on a rince cycle as nothing else works.Have checked and cleaned all the filters etc any advice would be appreciated .the machine is 2 years old


... Whirlpool Dishwashers

I have a frididaire proffesional series aquasurge with speed clean dishwasher # PLD4375RFC3 dishwasher there is an Er code that just keeps flashing the china/crystal light is flashing as well as the low rinse light. it used to sound like it was running when you would close the door but nothing was happening inside. any ideas?


... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

The whirlpool agp 931 keeps blinking 7 times, puase, 7 times when I start it. It does not do the washing program . Is that a code for an error? any help would be much appreciated


The blinking clean light is an interruption in the dishwasher program that either indicates a malfunction, or it can be a simple glitch. The following link explains how you may be able to clear the blinking clean light problem: ... Whirlpool 18 in. ADP530 Free-standing Dishwasher

Hi I have a Candy cd242 dishwasher all of a sudden it has stopped washing, I found that the feed hose had a kink in it so have re- routed that. But now the timer appears to go around but only part runs each section of the programmes, and then just ticks the rest of the time. Does any one know the problem or could it be a over filling valve that has sent a message to the controller. If so how do I re-set that. I would appreciate any-ones help to [email protected] cheers simon


... Candy Dishwashers

Bosch dishwasher Dishwasher runs much longer than timer, stays at 88 minutes for an hour! When I open it and then close again, timer will say 90 minutes! It will run for hours till cycle is completed! Most of the time dishes are still wet.


Hello guest. seems you have a leak in the base. Looks as though motor is washing dishes but actually its the drain pump thats been activated which doesnt allow the timer to proceed forward. ... Bosch 24 in. SHU53 Built-in Dishwasher

My Bosh dishwasher now runs well past the 105 minutes as stated in the manual, over three hours before I intervene. It gets stuck on the wash mode, it wont drain or rinse, just runs and runs in the wash mode (I know it's in the wash mode because when I open it up, theres suds inside). It will do the wash mode until I reset the wash mode to "Rinse & Hold". I appreciate whatever information you could provide.


Hello, welcome to Fixya.\015\012\015\012The problem you're describing is unfortunately a common one with B/S/H/ built dishwasher's. That includes Bosch, Thermador, Siemens, and Gaggenau. ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

GSD500X-73WB Dishwasher: Automatic timer has stopped working. It is still possible, though, to work the dishwasher manually by turning the dial. How much will it cost to replace the timer? I guess that it is the whole control unit including the timer that would need replacing.


... GE 24 in. GSD500X Built-in Dishwasher

Hello. my dishwasher leaves gunk on the inside of glasses that were wiped clean before washing. It seems like that would mean the drain to the disposal is clogged but the hose is clear and the impellar is free. I blew on the hose and got movement in the disposal. the impellar is clean and new looking. I thought it would be a little dirty? Any help would be greatly appreciated. I will answer any question you have in case i didn't explain it well.


There are many probable causes of failure .A dishwasher's water inlet valve is its most common part to fail. When \015\012your dishes are not being fully cleaned, quite often a faulty water \015\0 ... Dishwashers

Diswasher A couple of days ago my dishwasher would not start, there are lights on the front panel and it starts a washing programme but doesn't actually wash anything. I removed the filter from inside the dishwasher and it is full with water, it seems like there is a blokage somewhere. Would a blockage cause the diswasher not to start. Any help on this problem would be greatly appreciated.


Jhgf ... Whirlpool 24 in. ADP6940 Dishwasher

My karcher hds 745 is running but just won't build up pressure, this occurred after a really cold few weeks this winter and I hadn't put anti-freeze through the machine to winterize it. There's no water coming from the bottom of the machine when it's running as i've read that if the pump seals are faulty water will escape from the pump etc. The machine motor runs ok but no pressure is acheived on the gauge whatsoever. Any help would be appreciated. Thanks in advance Paul.


... Karcher Pressure Washers

Bosch dishwasher keeps running when the timer reaches 1 minute


... Bosch Dishwashers

My Frigidaire dishwasher keeps showing the Er uo codo on the display. It used to would finish a load even though it would stop for a while when the error message came up, but now it will not run at all when the error message comes up. I read on this site that the Er uo has to do with the vent. I pulled the dishwasher out and removed the vent. I turned the dishwasher on and the vent opened and closed about three times when the cycle started, then it stopped and the error message came up. Is


Hi. This code is in reference to the vent assembly. This may also be a control fault, as well. To isolate the culprit, you will need to make sure that the vent assembly is not blocked. If it is blocked, it must be replaced. Restricted air flow will c ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0945 seconds