Having problems with your Bosch Dishwashers ?

I have a Bosch model Shv 4303 dishwasher with a cabinet face attached. The handle is loose and I need to know how to remove the cabinet face from the dishwasher to tighten/replace the handle. The original mounting/installations are no longer available.


Answers :

Repair Help & Product Troubleshooting for Bosch Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Bosch model Shv 4303 dishwasher with a cabinet face attached. The handle is loose and I need to know how to remove the cabinet face from the dishwasher to tighten/replace the handle. The original mounting/installations are no longer available.


... Bosch Dishwashers

I brought a new face plate for the handle of my F&P dishwasher but can't work out how to remove the old one?


Pull the plastic screw on each side of the drawer with a nose plier. This will loosen the front cover and allow you to lift the top plate along with the handle. Replace the handle and put back the front plate and the front cover. Finally put the 2 s ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a GE Model#GSD433OZOOWW dishwasher, I am changing the color from white to black. I have ordered all the parts to do this but the insert for the eschutcheon is no longer available. Is there a safe way to remove the old insert? or should I just paint the plastic black? Thanks in advance


... Dishwashers

The cabinet handle that is on the wood cabinet door cover is loose, I need to remove the cabinet door, tighten the knob and replace the door


... Miele G2183SCSF Builtin Dishwasher

Should knives/forks/spoons be loaded with blades, tines,bowls down or up in dishwasher? When ready to load knives/forks/spoons in the dishwasher, should you load the utensils with the handles at the top, or should the handles be at the bottom with the blades of knives, tines of forks, and eating portions of spoons be placed face down in the dishwasher? Simply put, should the handles of the utensils be placed up or or down when you load them in the dishwasher?


I find they come cleaner with the handles down, but if you have kids they come clean enough and are safer loaded with handles up, with spoons though, always load handles down so they can get the clean water to the whole spoon. ... Frigidaire FGHD2433KF Builtin Dishwasher

Kenmore Dishwasher Model #110703412 leaks, likely around the motor shaft. Are there motor shafts seals and how are they replaced? Does the motor assembly remove through the tub or does it require being removed from the bottom? Do you have to remove the dishwasher from the cabinet to do this job?


... Kenmore Dishwashers

Screw drop Hi I was installing my new LG dishwasher and I droped a screw in the hole in the side panel where you can put a screw to connect to the side of your cabinet. There is a small plastic cover which I removed where you can screw a screw into the cabinet. However the head of my screw was too small and fell in the side panel. I can not get the screw out or see it now although I know it is in the dishwasher. Is there anyway of getting it out or will this cause a problem? Since it is in t


A great retrieving tool for this is a flexible shaft magnet wand. I strongly recommend this tool be placed in everyone's toolbox.\015\012\015\012as far as leaving it there if not found? probably safe from electrical. will years of vibration allow it ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

My mother has cancer so needs me to research her problem with her dishwasher. My mother's sink drain water is emptying into the dishwasher. It has to be manually removed since she does not cook much and therefore no longer uses the dishwasher as much as she used to. Is there anything I can do without calling a repair man or plumber? And if I must call a repair man, which should I call, a Maytag repair man or a plumber?


Problems associated with water from the kitchen sink back filling into the dishwasher are caused by the drain line on the dishwasher not having a high end loop. In simple terms, the dishwasher line is too low and is providing a path for the water to ... Maytag Dishwashers

Dishwasher (Model # SHU6806UC), unit is about 8 years old, very light use, less than once a month, and no previous problems. Turned on unit and after about 10 minutes, I found water on floor coming from dishwasher. Turned unit off and turned off water shut-off valve. Removed dishwasher from cabinet. Found mice had chewed a hole in water discharge hose under unit, inspected all hoses, and found another hole chewed in the 13" flex hose in the front of the unit. Also found the float chewed to alm


Hi,\015\012 Check the valve is open where the supply gets its water from the sink supply.There is a garden hose type swivel adapter after the valve, Close the valve tightly and then unscrew that hose coupling and see if the hose is full of w ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher

Jdb2100aws dishwasher - door handle fasteners loose, handle ready to drop off. This is a dissambly question: The middle section of the door has an upper one-third (which contains the input switch strip) and a lower two-thirds; the upper section must be removed to tighten the door handle fasteners. After wiring is disconnected (yes, power is OFF), the upper section appears to be held to the shell by some kind of barbed fastened from the inside, run through a tab on the door shell and into a fema


After removing the stainless cover l tried to disassemble the door further but found it difficult, there is a hard thick plastic cover, i took my dremel and cut a small hole large enough for a wrench to fit and tighten the thin nut on the handle, lin ... Jenn-Air 24 in. JDB2100AWS Built-in Dishwasher

My portable dishwasher hose that attaches to the faucet is to short for where I want my portable dishwasher to sit. I would like for it to sit in one spot. I am not allowed to alter or cut holes in the side of cabinets, I am renting. Is there an extension for the hose to the faucet? If not, what can I do to make the hose longer? If I really have to I will cut the two hoses that comes from the dishwasher to the faucet, but I would rather have an extension first.


You should be able to find extension or replacement hoses that you can use to extend the existing hoses at a hardware store. If you need to join two hoses that have female connectors, adaptors with two male connections are available. ... Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

I want to replace the door spring in an old Kenmore dishwasher, but the screws to remove the bottom panel are flush with the kitchen cabinets. Can I move the dishwasher forward about an inch to expose the screws?


Hi and welcome to FixYa, Initially, pls check the piping works and the drainage connections by visually inspecting these. Normally cabinet works at the sides should allow you this. Additionally, pls make sure that the electrical connecti ... Dishwashers

I have a GE profile dishwasher with the controls on the door edge. my handle for the door has become loose on one end. how canI tighten the handle. doI have to remove the entire panel on the door back?


... GE Profile PDW8060GSS Built-in Dishwasher

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c


You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers

The handle on the dishwasher is broken and the door doesn't shut all the way. I removed the screws to look inside and there are wires that go into this component that is connected to the handle. Is this something I can fix? How would I find the parts.


... Amana 24 in. ADB2500AW Built-in Dishwasher

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

The handle opener on my my Kitchenaid whisperquiet dishwasher is completely loose and I can't open the dishwasher to remove my clean dishes. What can I do???


The idea is to lift up on the part of the latch that is fixed to the body of the washer. The door part of the latch slides under this peice. If the handle mechanism is broken, it will not depres the door part of the latch to allow it to open. therefo ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Jennair dishwasher - model JDB-5 with stainless steel front with stainless bar handle. The left hand side of the handle has become loose. How do you take the door off to tighten screw. I tried by removing all the interior screws and lifting the first plate off. That brings me to the electronic circuity but not to the screw port. Please advise


... Dishwashers

How do I remove the front panel on a GE Quietpower 3 dishwasher? OUr handle broke and we cannot open our dishwasher.


... GE Dishwashers

I have a Miele G896 dishwasher. Drain light on. Washer won't work. Water clogged in drain area. Trying to remove triple filter system to clean it per owner"s manual, but handle stuck. Tried pressing down, turning both directions, technical taps to free handle, but no luck. How do you get triple filter system out to clean it?


... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Hi I have a maytag dishwasher and a maytag fridge my fridge has been nothing but problems it has flooded my house twice in the past 9 years, the part on the inside are braking that hold the shelves in place and my dishwasher is on a recall that i just found out today. IT has a part called vent inlet that is cracked and the part is no longer available,so is part can i use it with out it in and I need to have a repair person in to fix what ever the problem is that has caused house fires I have no


... Kitchen and Much More Dishwashers

Dishwasher door spring broken does the dishwasher need to be remove from cabinet to repair


Yes you will need to pull the dishwasher out to fix the spring. ... KitchenAid Dishwashers

Handle broken on indesit integrated dishwasher do i have to remove all the screws on the inside of the door to replace the handle?


... Indesit 23 in. DV62 IX Built-in Dishwasher

My dishwasher has a leak around where the motor and pump connect. I tried to tighten screws, but they are tight. Do I need to replace pump? GE Appliance Website says that pump is no longer available. This dishwasher was purchased around 1998 timeframe. Thank you.


Hi\015\012\015\012Though it seems that the pump should be replaced however,\015\012please post back with the model no of your GE dishwasher. Hope this\015\012helps...please post back for further assistance.\015\012\015\012Daniel ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1904 seconds