Having problems with your Bosch Dishwashers ?
water not pumping out not blocked
Repair Help & Product Troubleshooting for Bosch Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Water flow in and pumping out, but not wash dishes, SPRAY ARM BLOCKED, pump not rotating and getting hot
... AEG 24 in. Favorit 80860iW Built-in Dishwasher
Hello my beko dishwasher keeps on pumping out even when it is empty of water. i think it happened after the first rinse it pumps constently i havepoured water through it the outlet is not blocked it just keeps going its like the pump thinks there is still water to be extracted
... Beko 24 in. D3731F Free-standing Dishwasher
I have a 13 year old Siemens SE64630GB. It isn't cleaning items in the upper basket and I believe it's due to lack of water pressure in the upper spray arm leading to little or no rotation of the arm. Have cleaned out the drainage pump and removed and cleaned both the water feed pipe to the upper arm (a lot of gunk in there) and the spray arm itself (which also had blocked nozzles) - no apparent blockages now. Could there be a blockage in the circulation pump and if so how do I access this pump
... Siemens Dishwashers
HI dishwasher will not drain if i remove all the water will run thro cycle and stops with a couple of cms of water left have tryed to find filter inside and failed, removed sides and can see a pump on right hand side can turn impeller easily, is this the drain pump? if not how do i get at pump and or filter. is it possible that plastic chamber on left hand side could be blocked assume this transfers heat Robert
... Bosch 18 in. SRS55L02 Logixx Slim-Line Free-standing Dishwasher
The pump doesn't seem to put out enough water pressure to turn the various revolving heads/nozzles in the washer - all washing heads are operable (ie unblocked) while the S shaped nozzle at the base and the small round nozzle at the top/ceiling of the cabinet do revolve slightly or slowly - but the two main nozzles spout water but not enough to revolve Is this a defective pump or a partially blocked pump ? - or something else - I have checked everything else and they appear to be functioning
It will be helpful to know the make and model number of the dishwasher to diagnose the problem you have.\015\012\015\012Generally this is attributed to a blocked chopper assembly in the wash circuit but hard to be sure if your model has o ... Dishwashers
Bosch smv50c00gb/03 No water being pumped into machine however the pump is fully working and pipes are not blocked
... Bosch Dishwashers
We keep getting the message that the wash arm is blocked (Heavy/Rinse), yet the arm is free. We have replaced everything in the drawer that might impede the arm. We have checked the arm for food blockage, but there is none. Moved the rotors around to different drawers. We have replaced the rotor and the pump motor. Still get the message. It is annoying to receive the message four or five times a cycle. I think it is whatever is sensing the arm block, but have no idea what that might be. Af
Access the rotor, remove it, clean it and put it back in place.The rotor is part 5 in the diagram below. Click on the picture to enlarge: ... KitchenAid KUDD01DSSS Built-in Dishwasher
Drainage pump appears blocked. All filters and pipes are clear. Where &how do I acess the pump
You will have to provide the make and the model number of the dishwasher. Generally the pumps are at the base. You will have to disconnect the unit and drag it out on the floor. The access to the pump can be obtained by laying the dishwasher on the s ... Dishwashers
Hi, I've got a SN25M830UK. It starts the programme, then I can hear some noise like a motor is spinning (it happens 2-3 times) and then I get an error E21. I checked the filter and pump cover, there's nothing blocking. Is is a bad pump? How can I access it? Many thanks.
... Siemens Dishwashers
Doesn't pump out the water and I can't find where the pump is to check if it is blocked
... Bosch 18 in. SRS55L02 Logixx Slim-Line Free-standing Dishwasher
Continuous running I have taken on board solutions already published on the site re possible controll panel damage etc. But I would like to check that the waste water pump isn't blocked before dismantling the controll panel. Could you describe how to access the pump to check it out. Thanks Rogspeed
... Bosch 22 in. SKT5108 Free-standing Dishwasher
I have a Electrolux dishlex dx302 it does not drain the water I have checked the pump and hoses for blocks and they are ok. I'm not electrically minded so how can I confirm the pump is stuffed?
You should try changing the hose to drain water. ... Dishwashers
I have a Hotpoint BWM129. It is working fine but it is leaking water from underneath the front - dripping. Any solutions or advice would be appreciated. There is nothing blocking the pump as we have taken the front pump cover off. Thank you.
... Hotpoint Bwd12, Bwd129, Bwm129 Washing Machine Pump & Filter Housing - C00092264
Ignis adl348 starts normally, fills with water then stops. Fault code is 4 flashing lights, I think the pump is blocked as i pulled a kids medicine pump syringe out of the waste water outlet in the sump?
... Whirlpool Dishwashers
ASKO 1905 Dishwasher. F2 fault appears on the display screen.I have checked the pump as per instructions in the owners manual but the pump impeller was moving freely. The drain hose isn't blocked or kinked either. Can someone please help. Thanx.
F2 error usually is water in bottom pane. A floter is rising and cutting supply and displayin g F2\015\012\015\012\015\012\015\012 This us usually due to somthing leaking. Ie the light in machine, gasket is broken and water leaks intu bottom pane.\01 ... Dishwashers
I have a GE monogram zbd5900 that continues to drain, won't shut off. The drain pump just runs. None of the lights on the control panel will come on, tried pressing and holding buttons to clear, nothing. Turned off and on circuit breaker (even left it off overnight) and did not change. Drain is not blocked, pulled the unit out and put water in the bottom and it pumped the water out just fine. any thoughts?
See if you can access the tech sheet, should be on the right side of the underside of the unit after you remove the toe panel, or perhaps in the console. Almost sounds like a stuck key pad but the tech sheet might shed more information on this malf ... Dishwashers
MDB3100 has hard time pumping water out, nothing blocking pump
HI. check the following areas for faults.1. Air gap / Drain hosesIf there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: I ... Maytag MDB3100 Dishwasher
Getting an e2 code. Exit pump works, drainpipe is not blocked. Keeps pumping even when unit is dry. Help
... Smeg 18 in. DWI410 Built-in Dishwasher
I have a similar problem to another person. The drain on the dish drawer was blocked. The unit now shows an F1 error code ( flood?) and the pump runs continuously even after I've unblocked everything. I've tried switching it off for ages and drying everything out. When I switch it on again it shows the wash programme but then reverts to F1 and the pump motor runs continuously. Any ideas to cancel the F1 code?
The flood sensor on this unit is a PC board in the base, so you would need to remove the lower drawer and dry it out under there. If the base is dry and you still have the error, you can take a look at that sensor and clean any corrosion/minerals off ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Bosch Classix dishwasher SRS43C12GB/23 not draining. Seems to wash fine but can not pump water out. The pipe is clear, i have already checked. How do i open the machine and check if the pump is blocked?
... Bosch 24 in. SRS43C12 Classixx Slim-Line Free-standing Dishwasher
Hello I have a Bosch dishwasher SHU9905UC and went to clean the spray arms etc and ran the machine without the filter screens in the bottom. **** went everywhere, food, soap scum etc and it first stopped draining and filling. Cleared the drain flap and now works on drainng and filling. But now the wash pump is not running. I figure **** is somewhere in the wash pump or blocking a micro switch etc. I can turn the impellor with my finger. Is there a micro switch in the pressure chamber that is a
Miele G 870 SC dishwasher had blocked drainage due to stopped up sewer which got snaked out by plumber. Ever since, the drain pump won't stop running. Have cleared the trap, filter, and drain-filter and still the pump runs continuously.
Hi\015\012\015\012The problem is with the float switch mechanism located at\015\012the bottom of the unit...either this has gone bad and should be replaced or the\015\012pump itself is bad & should be checked. Hope this helps...please pos ... Miele 24 in. G870 Built-in Dishwasher
Dishwasher wont empty and does not appear to be blocked , i cleaned everything out of the bottom of the washer and still is not pumping out water. Could it be the pump? how would i test this? Tony
... Bosch 24 in. SGV53E03 Built-In Dishwasher
Possible pump blocked
Dishes have white film glasses are foggy ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Belling IDW604 Hi, I have an error code E4 showing on this machine any ideas on how to fix it?? it seems the pump is wanting to start but then does not I cant see a block in the tubes and I want clean dishes!! Any ideas would be gratefully recieved Rebecca
I found the solution myself. On the bottom plate, there is a float and a microswitch, when the water leaks onto the bottom plate it raises the float and activates the microswith which shuts down the machine and shows E4 on display. To get rid of the ... Belling 24 in. IDW603 Built-in Dishwasher