Having problems with your Bosch Dishwashers ?
Dishwasher shu4006 is not going thru the cycles. We can make it do it manually but won't do it automatically
Based on your description I suspect the thermostat isn't satisfied when heating the water, hence it get`s hung up trying to heat in the part`s of the cycle it`s called for.
It very well could be caused by a faulty flow switch, NTC or heater as well but not very likely.
The dishwashers made by Bosch with a rotary dial timer have very few if any, issues with the actual timer or element but they do with the thermostat within the door panel.
If the thermostat is not satisfied the water may heat but not be indicated via the thermostat, hence timer will not advance. This is not likely the issue since your's does not even appear to be heating.
Here`s what you can try. If you have any hesitation or reluctance to service this yourself please call in an authorized B/S/H/ ( Bosch/Thermador/Gaggenau ) appliance technician.
**Turn off the breaker at the service panel before attempting any service suggested **
1. You will require a #20 torx screwdriver to remove the door panel by taking out the screws around the panel, except the ones along the top ( watch the edges they are very sharp )
2. Once the panel is removed you should see the thermostat over by the detergent dispenser clipped to the inner door, remove it and test it. You`ll need a ohm meter/multi-meter plus a lighter or match to heat it up to see if it open`s & closes.
**NOTE** it can occur the thermostat can become loose and detach from the bracket which holds it in place, this too can manifest in the sysmptom of the timer not advancing
Let me know how you make out and what you find.
Thank you for choosing FixYa and Good luck.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Dishwasher shu4006 is not going thru the cycles. We can make it do it manually but won't do it automatically
Hello, welcome to FixYa. Based on your description I suspect the thermostat isn't satisfied when h ... Bosch Dishwashers
My dishwasher doesn't automatically switch over to the drain function, I can switch it manually and it does drain but just won't go automatically.
Could be the drain pump is stuck ... Whirlpool ADG450 Slim-Line Built-in Dishwasher
GU980 dishwasher I have a buzzing sound when the washer is in drain mode. The manual indicates there might be something in the Power Clean Filter, and that it will go away when the object grinds up. I called Whirpool, and they said the same, and to run for 2-3 cycles to make go away. 2-3 cyles later, noise is still there. I noticed a nub off the rack that looks like an end peice of metal broke off from rust. My guess is it's stuck in the PCF, and will not grind up. I removed the nut, lower spray
The nut holding the inpeller has to come off it is probally frozen\015\012if it snaps off then the pump assy willl have to be replaced or at least the motor, you need to get below the impeller to see what is down there though, or let it run as ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?
The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher
I have a Beko DE 6340 dishwasher. it was blocked in the pipe so stopped running, i cleared the blockage so that the water pumped out but now it still wont go even tho the lights are on and it still makes a noise as tho its going.
I have a bosch dishwasher model number sgv46m03.when i turn it on it sounds like its running,there is water going to it but it wont wash.when the door is open it still makes the same noise,any idea what it could be. the machine was working perfect but was doing some work in the house so it was not in use for 3 months.
... Bosch Dishwashers
Water wont go down and makes strange noise. - Frigidaire 24 in. PLD2850 Built-in Dishwasher
Hi,Here is a tip that I wrote that will help you with that problem..http://www.fixya.com/support/r4078724-dishwasher_problems_ ... Frigidaire 24 in. PLD2850 Built-in Dishwasher
Telmann Dishwasher TEL 12DWM. Dishwasher started to make weird wooshing start-stopping sounds at the beginning of the wash cycle so I stopped it. Since then the lights are on but wont go regardless of where the switch is set to. Have pulled the pump off and the inlet pipes and blown to remove any blockage but still no luck. Cant get into the water jet part due to connectors that require specfic tools to remove and replace. Any thoughts?? thanks in advance, Michael
I have a GE Eterna series triton dishwasher, and when i go to start at load, it will wash for maybe 45 sec, then start to make this high beeping noise. it wont stop till you reset it, but it keep on doing it with every load i do, any help???
My bosch excel dishwasher has the following fault: start the cycle, water starts to fill but then check water light comes on and it then starts to empty again. Pump then keeps going. I have checked the hose and even swapped it round with my washing machine one but this makes no difference. I have cleaned all the filters and taken off the cover to check the 'propeller' as sugested in the instruction manual. But no joy - check water light still illuminated and willnot continue with cycle. - Help!!
This unit im sure has a water flowmeter that measures the water intake.. if this cannot read then the unit shuts down to avoid flooding.. \015\012it needs replacing... it is attached between the valve and the side tank or attached to the tank d ... Bosch Dishwashers
Everything runs OK, but only when you manually turn the dial on the front, otherwise it does not automatically go to the next cycle. Does the dial simply need to be replaced or is there another solution to the problem?
... Maytag 24 in. MDC4000 Free-standing Dishwasher
A piece of stoneware that chipped off a casserole dish appears to be caught in the wash module. It makes a horrible grinding grating noise that doesn't go away. Is there anyway to open the module and fix? The manual says to call for repair...
Yes...you should be able to clear it out yourself.I will need a complete model number from you to be able to give you the correct process. Watch the video to retrieve this information.\012Write it down then re post the information.\012Cli ... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173
I have a whirlpool dishwasher type 280-2 and the detergent door will not open automatically anymore. The compartment is thoroughly cleaned and wont even open if its empty so gook or over filling is not the problem. I believe I probably knocked off some part that makes it open at the proper time. If someone could explain how the process works and/or submits a picture of the parts, I could perhaps deduce what is missing. Thank you in advance as this is driving me nuts!
My washer fills with water then just makes a humming noise wont go into next cycle. model number 363.1556990
Sounds like a lid switch jumper it and seeif that works you will have to take machine apart to get to switch ... Kenmore Dishwashers
Need a manual for gu2300xtsto. does not cycle automatically, but can manually cycle.
... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
I have a newer model GE dishwasher. About a couple of weeks ago we lost power to home. When power was returned the dishwasher was making a high pitch sound and power was not returned to the front display. I had to remove a black/white wire from front of the display to make the high pitch sound go away. Do you have any solutions to make the high pitch so go away and for power to be restored to the front display? Thank you.
Hello\015\012\015\012High pitch sound comes when the main control also known as the electronic board goes bad and needs replacement. Please try to blow air with hair dryer on the display just to check if that'll solve the problem. Hope yo ... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher
Hotpoint DF23: Wont go through full cycle
Hi i have a hotpoint D23 11years old. Have just replaced the timer switch as it got stuck on the programme . The new switch has not cured the problem. could the new timer switch be defective or is ther something else I should look at.thanks ... Kenmore 24 in. 16539 Built-in Dishwasher
It washes the dishes but the water wont go away i have cleaned the filter and surrounding area but water wont go away any ideas please thanks
\012Hi,Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Indesit Dishwashers
Dishwasher wont go into cycle mode and hums
Motor bearing has lost it's lubrication. Can be fixed by removing motor and put some WD-40 on the brass bearing. Have to clean it first with solvent and it might not last. There is a chance of some oil in wash water very minute. You could try a new b ... Dishwashers
Hotpoint fdw60 dishwasher wont go past wash wont
... Hotpoint 24 in. FDW60 Free-standing Dishwasher
I have a Kemore water softener model 625.348591 Ser.#82658 that for about the last 2 months hasn't used any salt. But now it seems to be making the pellets small without going down. Now it's s
... managemylife.com Dishwashers
Purchased 3 days ago. How do you know when cycle is complete? Lights never go out, doesn't say in owners manual? What dry setting should I use? Manual doesn't say, dishes are still wet when I let
... Electrolux EIDW6105GW 24 in. Built-in Dishwasher
Hotpoint dishwasher FDL570G.R is filling with water but wont wash the dishes,we've checked pipes,cleaned filters etc. but still wont work.It makes noise like its heating but wont do anything after that,it will just drain when we turn it off. It is only 4 months old.
I am looking for a manual for a dishlex DX403 manual - I have moved into a house with this make of dishwasher and there is no manual and at times it does not seem to heat water or dry dishes. Help please.
... Electrolux Dishwashers
My Maytag Dishwasher mdbd880awq wont finish a wash cycle. It will wash and rise then when there is 32 minutes left it wont drain and wont dry the dishes, It just makes a clicking sound. I have to dry the dishes by hand and then use the rise only cycle to get the tub to drain. The drain only doesn't work either