Having problems with your Bosch Dishwashers ?

Where does pp-td20 4 fit - Bosch Dishwashers


Answers :

Repair Help & Product Troubleshooting for Bosch Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where does part no. PP-TD20 3 fit in Bosch dishwasher?


Its for big items. Basically, you take out the top shelf, and put it in place of the water spinner that is there normally. ... Bosch Dishwashers

Where does pp-td20 4 fit - Bosch Dishwashers


... Bosch Dishwashers

Hello there, I have a Bosch Logixx dishwasher which I purchased just over 2 years ago. My upper dishwasher tray is not fitting properly into the hose pipe holes on the inside of the back wall of the dishwasher. It has a movable plastic mechanism sort of fitting which is dropping off everytime I open the tray to keep the utensils and unable to close it fully until I re-adjust the plastic to fit into the holes proeperly and then it works. I am not sure how to fix the problem, do I need an En


Hello Deepak,\015\012\015\012You can definitely fix this yourself, but I'm not entirely sure from your description which part is "dropping off". It may be a simple fix where something needs to be clipped back into place or you may need to ... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

Will a Bosch dishwasher custom panel fit a KitchenAid?


... Bosch 24 in. SHV57C03UC Built-in Dishwasher

I got this bosch sgs43C12 dishwasher and have the problem that it doesn't fit in our new kitchen(it's to high). i know it is meant as a free-standing dishwasher but is there a possibility to remove the top to get it into the new kitchen? or won't the dishwasher function without the top? many thanks for any help martin


THE LOWER LEGS CAN BE ADJUSTED ON THE LEFT ,RIGHT AND MIDDLE ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Bent leg We had tile installed and so we have to be able to adjust the legs by approx 1/2 in. to pull the dishwasher out. The timer went out and so we were going to replace the dishwasher, but the new one won't fit in our cabinet. So, while trying to put the Bosch back in, I guess the back leg hung up on something and bent ... can't screw it in, can't screw it out, dishwasher is out of level as it is. Questions as follows: 1) how important is it to have it level? 2) any suggestions on wh


It's hard to say what to do about the leg without seeing it. You should at least try to get something under it to get it level as possible. If not perfect, it is better to have it tilted slightly back than foreward. ... Bosch 24 in. SMU40 Built-in Dishwasher

Fitting a fully integrated Bosch dishwasher door


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

Hose hookups My Bosch SHU43 dishwasher has no manuals. My problem is that I have one long hose that should be the discharge hose but no fitting to hook it to my disposal nipple. My other problem is there is another hose that exits the dishwasher about mid level but does not hook to anything. Should this hook to the supply?


The smaller hose should be 3/8" is the water feed the larger hose is the discharge. you can open the front panel (2 torks screws) and you will see the water inlet valve in the left towards the center the electrial box is on the far right ten determin ... Bosch 24 in. SHU43 Built-in Dishwasher

We have a bosch dishwasher model shx43c and water is dripping on the floor from the area of the supply line, taking the supply line fitting out and re taping it and re tightening it has not helped, could the valve be leaking back this way, instead of the more common leaking into the dishwasher itself?


If the supply line is leaking it could be a 3/8 supply line maybe the rubber washer built in the line is shot try replacing the supply line.they are about 15.00 at home depot.do not over tighten the new line you could damage it.some times people cros ... Bosch SHU9925UC Built-in Dishwasher

Dishwasher repair bosch dishwasher model no sgs5342gb/17 will not fill new water valve fitted


The most common reason why your machine has stopped filling is not the valve, but more likey you have had a leak and the base of the machine is full of water.\015\012If you take the lid off followed by the left side panel ( held on with 2 torx ... Dishwashers

My Bosch integrated Dishwasher SGV5303 has stopped filling with water. An Aquastop unit is fitted but the filter in that is not dirty/blocked. Any ideas? Regards, Bob


The same thing happened to mine in March 2010 ... Bosch Dishwashers

Fitting drain pump on bosch dishwasher sgs43t58gb/21


... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Will replacement motor 266520 fit SGS53E72EU/71 Bosch dishwasher


The motor for that model is 489652, I think you'll find that the two middle tags on the original motor are linked and one of the original wires has a smaller spade connector so can only go on a specific connection. As for the cap can you use t ... Bosch Dishwashers

Fitting a Bosch SGV46M43Q integrated dishwasher


... Bosch SGV56A13 Built-in Dishwasher

The door on an integrated Bosch dishwasher SMV50C00GB, when fitted, clashes with the underside of the D/W when opening. The door gets just past 45 deg open and will not go any further? Surely it does


... Dishwashers

I have an older Bosch dishwasher #SHU3326 and haven't been able to find stainless steel front that I know would fit. The unit now had an almond color and I've considered spray painting with the "stainless steel" look. Any ideas.......


... Bosch SHU9922UC Built-in Dishwasher

The waste pipe on my hotpoint dishwasher is connected to a spigot. I now want to buy a Bosch replacement but all models have a waste pipe which is too small in diameter to fit the existing spigot. A smaller spigot does not seem to exist and there is no room to install a stand pipe. Can you suggest a solution? Thanks


Do you have a garbage disposal? It is usually easier to drain through the garbage disposal. There is a fitting for this on all disposals. Be sure to remove the knock out plug first. ... Dishwashers

Our Bosch compact dishwasher (9000 014 580 (8403)) does not fill & therefore doesn't wash. I've checked the filter on the supply hose and cleaned out some small grey deposits, but still no joy. The clothes washer is on the same supply (a Y-fitting) and does work properly. Any clues?


Hello &\015\012Welcome to FixYa\015\012\015\012The water\015\012inlet valve is bad and needs replacement. Please get back to me if you have any\015\012other questions.\015\012\015\012Kevin ... Bosch Dishwashers

My Bosch SHE45M built-in dishwasher is suddenly taking an extra-long time to go through its cycles. On Regular wash it will countdown from 117 minutes to 31 minutes. When it hits that time it resets to 87 minutes, then counts down to 1 minute and will not stop. I have to hit the cancel-reset buttons for it to drain. I have tried to do a hard reset by cutting the power at the breaker for 20 minutes or more. I'm interested in potential parts and a description of how to fit it! Thanks in advance.


... Bosch SHE45M06UC Built-in Dishwasher

The upper arm no longer turns. It is 11 years old. It is SHV 4303 from 2000. If it can't be fixed will the panel fit any current dishwasher, whether Bosch or not? How noisy was it rated to be so I can compare to newer models?


The upper spray arm is just blocked you need to pull it out and clear the blockage. ... Bosch 24 in. SHV4303 Built-in Dishwasher

Is the NC85TR-910 a thermostat? (fitted to a Bosch dishwasher) Is there a wiring diagram available?


... Bosch Dishwashers

BOSCH SGS6302GB I took the front door cover off my dishwasher and 2 clearish plastic grommits fell out from the bottom (each side) of the door. I cant see how they fit back in. Can you help me?


Hi nikkij\015\012\015\012 It is simple to put them back on. the plastic pices fit on the bottom of the hinges. there is a cut out where they fit in. when you look at the door at the bottom you will see the hinges and the cut outs, the ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

New Bosch dishwasher SHE55PO6UC is noisier than expected. I listened to a 50db unit at Sears and the unit I purchased(47db) is not as quiet.The gasket/seal doesn't seem to fit tight against the cabinet opening and there are gaps at the side of the base plate. What type of materials can I use to improve the sound insulation?


\015\012\015\012Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. It could be because of the following: \015\012\015\012Wa ... Bosch Dishwashers

How do you fit a bosch dishwasher impeller jug


How do i locate the impellor jug on a bosch dishwasher sgv5303gb/13 ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1887 seconds