Having problems with your Bosch SHU5307UC Built-in Dishwasher ?

How to disassemble the drain component

\015 I have a "slow drain" problem. Only a trickle of water was coming out of the drain pipe at the connection to the sink drain, and since the drain cycle is on a timer, the pump shut off before all of the water was out. I eliminated the air gap and its attached hoses as a cause, looks like a blockage somewhere in the machine's drain line. I was able to pull a little material out of the hole at the bottom of the machine, and that improved the flow considerably, but I need to disassemble that plastic component at the bottom of the machine so that I can clean everything properly all the way through the drain line. I'm requesting a diagram, instructions, or where I can get a service manual so I don't get into trouble trying to take that thing apart. Thanks for any tips.\015

Answers :

Yeah, that link does not work, I will try to find the right one.
Diagram can be downloaded here there are no parts
available click on printer icon with multiple pages
in the lower right corner
Repair Help & Product Troubleshooting for Bosch SHU5307UC Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to disassemble the drain component


Yeah, that link does not work, I will try to find the right one. ... Bosch SHU5307UC Built-in Dishwasher

My Siemens SL84A305UC/21 dishwasher will not drain. I've checked the drain and it is clear. I can hear the motor hum during the drain cycle. It will fill and wash OK, but not drain. Does this machine have a solenoid for draining and if so how do I check it? How do I check the pump to ensure it is functioning correctly? I've tried to remove the plastic bottom of the machine to see what is inside and to troubleshoot the components, but it seems almost impossible to remove. What is the trick? What


... Siemens 24 in. SL84A305UC Built-in Dishwasher

My Siemens SL84A305UC/26 dishwasher will not drain. I've checked the drain and it is clear. I can hear the motor hum during the drain cycle. It will fill and wash OK, but not drain. Does this machine have a solenoid for draining and if so how do I check it? How do I check the pump to ensure it is functioning correctly? I've tried to remove the plastic bottom of the machine to see what is inside and to troubleshoot the components, but it seems almost impossible to remove. What is the trick? What


... Siemens 24 in. SL84A305UC Built-in Dishwasher

Jenn-air dishwasher JDB-5 (jdb1105awb) will not drain. Have repeatedly prompted drain cycle (start/cancel twice) there is what seems to be a pump noise for a minute or two, but no water flow noise and water level is the same in the bottom. The manual is sparce on trouble shooting and schematics. I suspect something is clogging the drain path. No changes to the drain hose routing. Machine has been installed for three years with no major issues. What is the recommended disassembly sequen


... Jenn-Air JDB6510 Built-in Dishwasher

Have a leaky gate valve shaft seal that I want to replace myself (part # WD8X181). It only leaks when in the drain cycle. Repair manuals are not available for this model. How much disassembly is involved to replace this seal? Do I need to gain access to the shaft from inside the housing pump assembly (drain sump)?


... GE Dishwashers

My GE Nautilus Portable dishwasher is leaking from the bottom, back left-hand side. Water is still draining from the drain line. Not sure how to disassemble to try to fix. Clogged line? Any advice?


... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher

I have a leaky gate valve shaft seal that I want to replace myself (part # WD8X181). It only leaks when in the drain cycle. Repair manuals are not available for this model. How much disassembly is involved to replace this seal? Do I need to gain access to the shaft from inside the housing pump assembly (drain sump)?


... GE Dishwashers

I need to get the drain plug out of the garbage disposal so i can hook up my dishwasher to drain. can this be done without disassembling the disposal. can i knock the plug out into the disposal


Take a flat blade screwdriver and insert it into the drain port that you connect the dishwasher drain line to. Take a hammer and tap the screwdriver until the plug pops loose inside the disposal. Now, reach down inside the disposal and retrieve the ... Dishwashers

How do I disassemble the bottom spray arm so that I can clean out the drain?


... Whirlpool 24 in. DU915PWP Built-in Dishwasher

Not draining well. Disassembled lower sprayer down to interior pump below 3 allen screws and found no obstructions and pump blades turned OK with slight resistance only! (Felt normal for a small pump motor). Tested after re-assembly with no improvement! Any helpful suggestions? I'm a pretty handy guy with experience on other appliances, just have'nt done a dishwasher before! Thanks, Hart Terrell.


Please provide full model number of the dishwasher.\015\012\015\012have you checked drain hose is clean on the kitchen sink end?\015\012what problem do you experience with the draining? is the wash program not completed? ... Frigidaire Dishwashers

I had disassembled my chemical injector to clean it out. I need to know how the order of the internal components are inserted


... Pressure Washers

Model MDB 7600AWQ It is not cleaning dishes well and the bottom water 'slinger' is not rotating. We disassemble the lower assembly and cleaned extensive soap scum and hard water deposits. Lower slinger is still not rotating. Water temp and water level are fine. Pump is getting water to upper slinger and pumping water to drain between wash and rinse and after rinse.


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

LG LDF6810ST had OE error. Disassembled found no obstructions blew air through and vacuumed hoses to air gap and to disposer, no obstructions. Never heard pump run when starting cycle, so replaced drain pump. Still doesn't run. Looked at the service manual, and the only other suggestion is repair circuit? Is this the circuit on the bottom right of unit or the pcb up top? Wires and connections all look fine. What else could it be. Any suggestions appreciated!


Hi,Usually my First Response to this Common Error is :-Most likely pump trap is clogged up. Access it behind small door at front. Drain water out through small hose that is there otherwise water will be all over the floor when ... LG LDF6810ST Stainless Steel Built-in Dishwasher

A GE triton dishwasher causes hammer noise when stops filling. The sink faucet works fine as do all the other faucets in the house. I cleaned all of the traps in the dishwasher. Because the sink works, I don't think it is a sink valve problem. I turned off the water to the house and drained the system, the air chambers should be good. Is there some component of the dishwasher that could be causing the noise? Would cleaning the pump help? If so, how would I do that?


The cause of the hammering noise, (slamming) is due to the water inlet valve on the Dishwasher (DW) shutting off abrutly once the DW reaches the proper amount of water.\015\012\015\012If this is an older DW, you might want to replace the ... GE Dishwashers

Dishwater is not cleaning dishes. Water fills up, and drains, but the 'arms' aren't moving. I've disassembled the motor and pump, and checked the lines for any clogs, and there's nothing there. Noticed black shavings under the pump.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Dishwashers

How do I reinstall the pump seal? I have old KitchenAid KDS-16 dishwasher. The drain impeller failed and I purchased a new kit. Disassembled the pump. Installed the new pump seal but it does not hold water.


You may have tilted the seal when installing so take it apart again and make sure it is all the way down in its bed and it streight to the shaft . and looks centered then reinstall all other parts and try again .. mm h ... KitchenAid Dishwashers

Our whirlpool du912 has worked good for 10 years, but now will not drain. I looked in the bottom for something that might be jamming the hardware but saw nothing. Do I need to disassemble the "filter module" and if so, how.


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Whirlpool DU912 Dishwasher

Help - the screws holding the dishwasher under the counter came loose & fell down the drain... how do I disassemble the interior to retrieve them? Kenmore Elite Ultra Wash Dishwasher, model 665.16269402


Yes remove the baskets and the spray arms and the flowplate assy get the screws and reassmble. good luck ... Kenmore Dishwashers

I just had a pyrex baking dish explode in my dishwasher. It's mostly drained, I stopped it within a minute of hearing the breakage. I've removed as much glass as I can find but should I disassemble the pump before running agian to ensure no glass particles there? And if so what's the proper procedure? Del


... Whirlpool SUD6000HQ Dishwasher

Pump disassembly Can't remove drain impeller from shaft. Need to replace motor shaft seal on Maytag dishwasher mod. DWC7302AAB


I removed the impeller on my DW761UQB. The instructions were molded into the plastic pump housing. This is how I DID MINE: Remove motor mount screws. Remove the chopper screw (screw only goes into impeller, not motor shaft). Remove chopper and rotate ... Dishwashers

Maytag diswasher MDB6600AWW Sprayer arms don't spin. Dishwasher makes all the right noises, except for spraying. Water fills properly and heats up. Water drains properly. Found paper on the back of access panel. Ran Manual Function and Field Service tests, no problems indicated. Disassembled all the pieces inside the bottom of the dishwasher. No obviously damaged parts. Shaft for motor turns freely. It seems like the parts that attach from the impeller to the motor shaft don't


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Kudr01tjbl0 not fully draining


... KitchenAid KUDR01TJ Dishwasher

Bosch SHU33A06/22 does not drain


I think so. Check for power at the pump. If so is it running. There are seperate pumps for drain and wash. It is also possible the impeller came loose and the motor is running but not turning the impeller. ... Bosch 24 in. SHY56A05 Stainless Steel Built-In Dishwasher

Whirlpool Gold Dishwasher not draining completely.


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0867 seconds