Having problems with your Bosch SHU9915UC Dishwasher ?

I have a Maytag model DWU9502AAM dishwasher, took out the top rack (easy) to wash furnance filters, and cannot get the rack back in rightly! Where are the rollers on each side supposed to be placed to hold the rack? Do the snap supports face up or down on the rack? I broke two of the roller snaps and replaced them, still no luck. Does anyone have a schematic??? Maytag has nothing on this I can find. Thanks!


Answers :

Hi there,\012

Well you can try from upside face...... there are some plastic lock type grips... for more information you can download the repair manual, please follow the below link -

http://cgi.ebay.com/_W0QQcmdZViewItemQQitemZ260460009545

Post comments for more information or help......

Good Luck!!

Thanks
Repair Help & Product Troubleshooting for Bosch SHU9915UC Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Maytag model DWU9502AAM dishwasher, took out the top rack (easy) to wash furnance filters, and cannot get the rack back in rightly! Where are the rollers on each side supposed to be placed to hold the rack? Do the snap supports face up or down on the rack? I broke two of the roller snaps and replaced them, still no luck. Does anyone have a schematic??? Maytag has nothing on this I can find. Thanks!


Hi there,\012Well you can try from upside face...... there are some plastic lock type grips... for more information you can download the repair manual, please follow the below link -http://cgi.ebay.com/_W0QQcmdZViewItemQQitemZ ... Bosch SHU9915UC Dishwasher

Maytag Dishwasher circa 2002 - Defective Plastic rollers The plastic rollers that slide the arms of the dish rack keep breaking. I have had this dishwasher for 6yrs now and go through 1 a year. This defect is really annoying for two reasons one; the cost - $50 each - X's 6 years = $300. Secondly, the inconvenience of having a delapitated dish rack that crashes sideways - with the weight on only one side. Presently, I'm about to order my 6th one. I'd like to know if you are aware of this d


... Dishwashers

2 upper rack rollers cracked in Maytag #MDB7600AWS - cant find simple replacement rollers for inside track - 1 1/4" - of upper rack.


JP Weld works great on repairing these junky Maytag parts. Note that they don't have a replacement for these upper wheels and a guy is selling expensive stainless steel replacements. The round connector broke off of ours that holds the wheel to the ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

I am trying to install a new Maytag MDBH945AWB Dishwasher and have to run the drain hose under the machine in order to get it to the sink. Each time I try to use the hose that comes with the machine it snaps in two and breaks. I have tried to look for a replacement hose that would stand up to the abuse but all I can find is the original. Is there a replacement I can get that is more flexible than the one that comes with it? At this point I am rather embarrased about going back to Home Depot


Hi...home depot sells clear PVC hoses, They come in various lengths up to 100 ft. You can use hose clamps to connect it to the T-fitting. ... Dishwashers

I have a Maytag wu 1004 dishwasher (or maybe it is vu I cannot tell). The top rack has lost many of the pieces that support the dishes. Can I get a replacement rack?


... Maytag 24 in. PDC3600A Built-in Dishwasher

Upper rack roller replacement on mdb7600awd - Maytag MDB7100AWB Dishwasher


Go to www.searspartsdirect.com and search model # mdb7600awb, track and rack assy, this will give you the parts breakdown and you can order as needed. if you don't feel com ... Maytag MDB7100AWB Dishwasher

Roller broken on MAYTAG top dishwasher rack


... Dishwashers

Defective top rack rollers - Maytag MDB7600 dishwasher


... Dishwashers

We have a Maytag dishwasher, MDC4000AWX. Both dish racks are rusted, broken and falling apart in places. How much is it for replacements of these dish racks. Also, so you have any used dish racks in excellent condition. We do not want to replace the dishwasher because it works perfectly. We are just VERY disappointed this this rust problem. What can we do?


The only way to get new racks is to buy them here at link below. Parts #1 and #3\015\012\015\012 ... Dishwashers

Model fphd2491kfo upper rack rollers don't turn, just drag. appliance is new, rack was replaced under warranty, new rack does same thing


... Frigidaire Dishwashers

I have a Maytag Quiet Series 300 Model # MDB8601AWS and serial # 10142983NA. I need to replace the bottom rack as many of the prongs have broken off and I need a bigger utensil holder. I know it has a safty recall and a local repairman is coming on Saturday. Where do I buy the replacement racks and holder?


... Maytag 24 in. PDC3600A Built-in Dishwasher

Dishwasher Racks The dishwasher rack supports for the rollers do not hold when there is any load on them. Do they make new supports to stop this problem?


... Equator SB72 Built-in Dishwasher

We have a 100% failure rate on multiple parts on two Maytag dishwasher units and no longer can get replacement parts from anyone. Any ideas of what to do? Here is the latest summary we sent to Maytag: Thank you for the help last fall. As a follow-up, we are still having very bad results with your product. You authorized replacement of the unit which was done. After one dishwashing, THE NEW UNIT SHOWED THE SAME PROBLEM (WOULD NOT TURN ON). I called in and you referred us to a senior te


Well iam sorry to here of you major problems.if the control board has been replaced several times and no luck fixing it there may be a problem with the main power supplied to the unit,as well as having a problem with the wiring harness.usually a manu ... Maytag 24 in. MDBH940AW Built-in Dishwasher

Our Maytag dishwasher, mod MDB9150AWS, has abad lower rack due to rust and prongs coming loose. Maytag sent me a replacement BUT without the center spray tower. It looks like trouble to remove the old one and install it in the new lower rack. Any help would be appreciated.


Yes, I resolved the problem after thoroughly studying the assembly. It was relatively simple; all I had to do was turn the spray tower 90 degrees and it came free of the rack.\015\012\015\012Thanks for the web site, nonetheless. ... Dishwashers

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

How do you remove the caps from the upper rack glides? I'm replacing the rollers that attach to the upper rack because one is broke.


Caps on the front ends of the glides can be pulled out. Sometimes they are hinged at the top and have a tab at the bottom to pull out. With the caps out or open you can roll the upper rack out of the glides. ... Dishwashers

Our Maytag model MDB4010AWW (8 1/2 years old) is leaving food stuck on the dishes and glasses on the top rack consistently. We've run several bottles of Dishwasher Magic through in the past few weeks which has only helped the problem a little. We posted this question to a similar forum a few weeks ago, and it was suggested that the wash pump might need replacement. What's the average life expectancy of a lowend dishwasher like ours? would it be more cost effective to replace it rather than to sp


It would cost you at least the 200.00 to have it replaced since the pump cost 150.00 and you would have labor added. It should last longer than it did if that's what's wrong with it. I would first observe to see if the upper spray arm is spinning and ... Dishwashers

Hello my dishwasher is not cleaning the dishes properly and has undesolved powder in the dispenser.The plastic rack has snapped in some places and tends to sag There is a chalky residue on all utensil and they seem to come out worse than before the wash Please advise as to where replacement parts for the top rack are available and the cost for the same and if I need salt in the disherwasher . I live in Madeley ,northern Suburb of Perth Thanks Parames


Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Whirlpool Dishwashers

How do I replace a broken cage roller for my top rack GE Profile dishwasher? Already have a replacement to install.


... GE Dishwasher Cage Roller Bearing Assembly WD30X10020

I need a replacement basket roller i.e., plastic roller that inserts into top basket slider. Where can I buy one? Maytag Jetclean Quiet Plus II dishwasher.


Go to www.searspartsdirect.com ... Maytag MDB9600A Jetclean II Built-in Dishwasher

I bought the Kenmore 665.110729521 about 5 yrs ago. Yesterday the two plastic pieces which attache to the top rack and slot into a plastic piece on the tub wall, broke and the whole top rack fell down/dropped. Anyone know what these parts are called and if one can purchase replacements for them and if so where? Appreciate any help.


... Kenmore Dishwashers

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

I have a Maytag MDB4800AWB and it leaks at bottom left side between the two panels, is there a seal I can replace,and if so, how do I do it? Also according to the warranty Maytag covers leaks of door


... Maytag Dishwashers

Rollers on racks continue to break, Maytag fix is buy entire new assembly like part number 99003585 wihich is 32.95 each time


I found an engineer who has made stainless steel axels for the rack...www.fifengr.com/maytag/....a cost of $40...but well worth the one time solution.... ... Dishwashers

Plastic Rollers for bottom dish rack in Viking Professional


... Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1080 seconds