Having problems with your Bosch SHX45P02UC Builtin Dishwasher ?

Not draining all the way modelshx45p02uc/59

\015 Cleaned out the traps with small micro debris, ran a quick was this emptied the washer basin of water, hoeve there is sitll a small amout of water remiminig in basin, maybe 1" max, is this normal? \012since we are on hard water, should i run the empty washer with appl cider vinegar to clean out the unit? is so how much?\015

Answers :

There will always be some water in the sump at the end of cycle, this should never however be above the level of the filters. This is why the machine will always run the pump for a while before it fills when you select a new cycle (to remove stale water). There are specific dishwasher cleaning products available which you should be able to buy from the bosch website accessories shop. Hard water should not be an issue in a dishwasher as it has it's own build in softener unit (this will only function correctly however if you maintain the salt levels)
Repair Help & Product Troubleshooting for Bosch SHX45P02UC Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool Dishwasher ADG 450. Start as normal and it keeps intermittentlly stopping and starting. Washs / drains fine, but sometimes cycle seams to last for a couple of hours. I think it is four beeps when it is stopping and then immediately starts again. We had a problem months ago where as the sink was draining into the dishwasher out pipe, so dishwasher wasn't draining / filling up. Fixed the problem by turning the pipe the other way so water couldn't flow that way - but I don't know if that


... Dishwashers

My Whirlpool dishwasher will wash fine, but when it drains, it's a slow trickle. I've snaked the line from the sink to the washer, but I can't find a clog. If I try to blow into the drain pipe all I accomplish is almost passing out. I can't blow all the way through it. When I hit the drain button, I hear the solenoid kick on with a rattle, then just a hum. Like I said, I just get a trickle, and the basin never drains completely. It's driving me crazy! Help? Thanks.


In the bottom of the dishwasher, there is a screen. Remove it and clean it and the drain underneath it. Make sure the POWER IS OFF before you start. ... Dishwashers

My Whirlpool dishwasher will wash fine, but when it drains, it's a slow trickle. I've snaked the line from the sink to the washer, but I can't find a clog. If I try to blow into the drain pipe all I accomplish is almost passing out. I can't blow all the way through it. When I hit the drain button, I hear the solenoid kick on with a rattle, then just a hum. Like I said, I just get a trickle, and the basin never drains completely. It's driving me crazy! Help? Thanks.


Ok, don't fret too bad, help maybe just reading.Disconnect the drain hose from the sink/garbage disposal, get a big bucket, stick hose in bucket, making sure that end of drain hose does not get lower then the bottom of dishwasher. Turn di ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

My kleenmaid dishwasher dw35x keeps giving the error that it can't drain and i got someone to look at the drain and they said the drain was fine. the only way i can make it drain is if i put the pipe into a bucket. HELP?!


... Dishwashers

Dishwasher fills with hot water. Float OK - water feed stops when full. Motor humms but no water spray (in all opperating modes). Cancel selection (with cancel button) and close the door. The water drains then the unit shuts off. Water feed OK. Drain Cycle OK. Looks like spray pump hung but do not know. Cannot find a reset button (as with disposal) or way to free hung pump motor. I did see glass pieces in the drain. Possibly a small piece hanging the motor.


If you found broken glass inside the machine some has likely migrated to the pump. about the only way to fix that issue is to remove the pump and either replace it or disassemble it and clean it out. ... KitchenAid 24 in. KUDP01FL Built-in Dishwasher

Won't drain I'm helping my daughter long distance,their dishwasher won't drain. I had her remove the course strainer to check the well for debris. She said she cannot get in it because the sprayer is in the way. How is the sprayer removed to access the drain well in the Maytag DWU dish washer?


In most cases the blockage is at the end of the drainhose, where it connects th the "peatrap", simply removing the hose clamp, then hose and inspecting. If no blockage found there you will need assistance. If you want, you can funnel your hand over t ... Maytag DWU9962 Dishwasher

Dishwasher won't drain. I made sure the sink drain were clear I don't have a Air Gap. Is there a way to check the drain inside the disherwasher. It started a couple days ago


I would check for obstruction in the drain hose.Take the drain hose off the garbage disposer hold it as low as you can over a pan or bucket and see if the dishwasher will drain centrifugally.If it does I would assume the pump is bad or disconnected.P ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Bosch SHU 43C 05UC/22 Has a very loud Groaning noise at start up midway and at end of cycle. Have cleaned and changed the DW Hose to the DW drain assembly under sink. Drains better but, I suspect the drain motor has been overtaxed because it's a long way to the sink - about 8 ft. under the kitchen in crawl space and up to sink.


... Bosch SHU43C05 Stainless Steel Built-in Dishwasher

I have a Bosch SGE63E05UC dishwasher that keeps intermittently showing an "E:25" error code. Occasionally it will get all the way through a cycle without going into error, but more often than not it will error and stop. So far the main control module in the front panel and drain pump have been replaced and the problem persists. All hoses have been checked and are clean (unit is only 1 year old) and drains well, when it does drain. Any suggestions?


... Bosch SGE63E05UC 24 in Builtin Dishwasher

We have a GE profile dishwasher that will not drain. We have replaced the keypad control and control module and it still will not drain. When we put it in service mode, we can get it to drain that way but when it is taken out of service mode, it goes right back to the same problem.


Its the timer issue:--\015\012what the timer does is control the motor and drain valve. If the timer doesn't work properly, the water may not drain and you need to replace the timer. This problem is common. ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Kenmore ultrawash dishwasher not draining properly I run the cycle and the water does not drain entirely, is there a drain plug or way to clear a blockage?


Hi,Here is a tip that I wrote that will help you with your problem...Dishwasher ... Kenmore 15529 Built-in Dishwasher

My GE Potscrubber 640 isn't draining. The bottom of the tub is completely full. I know there is supposed to be a little water but this is way too much. How can I access the drain? Which setting drains any water in the tub? Is there a site I can go to, to see videos of this type of repair?


... Dishwashers

My dishwasher stopped at the drain cycle. I have to press cancel, and cancel(which is also the drain button) again. Then,it drains but will not complete the cycle for heated drying. Is there a easy way to fix this?


Have you checked there is nothing blocking the filter at the base of the dishwasher?\015\012\015\012Please provide the brand name and model no. of your dishwasher so that I can help you better. ... Dishwashers

Whirlpool Quiet Wash Plus dishwasher Model DU920PFGZ3. Worked fine until I replaced the insinkerator and forgot to punch the drain plug leaving water standing on the bottom of the machine. I punched the drain opening, and pushed the cancel/drain cycle button. It drained fine but since no water comes from the spray arms. I have removed the arm all the way down..NOTHING!! Some research indicated it could be the water inlet valve. When the buttons are pushed, it cycles but no spray or water.


... Dishwashers

My kenmore dishwasher is not draining completely. It hasn't been used in a while. It did go through the cycle with new water and did drain slowly but not all the way. I checked drain and it is clear. Ed


... Kenmore Dishwashers

Frigidaire Dishwasher I have a frigidaire dishwasher that won't drain. it run through the entire cycle, the dishes are clean but the dishwasher is filled with the dirty water. I have unhooked the hose and let the water drain out that way but when i connect evrything back it still doesn't drain.


A common problem with dishwashers is the non-draining machine. If you are having trouble, check to see if the drainpipe and sink trap are clogged. If you still have drainage problems after doing this, check your drain hose to make sure there are no k ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

I have a thermador dishwasher dwhd43cf and it won't drain. My guess is there is a clog somewhere in the drain tube. I think the blockage is inside the dishwasher. How do I access it -or- is there an easier way to clean out the drain?


... Thermador DWHD43 Dishwasher

Whirlpool dishwasher wont drain all the way


... Whirlpool Dishwashers

I have a Bosch SHU033A diswasher that is not draining. I have checked the lines but cannot figure out how to get to the drain pump. I have turned on its back but there seems to be no easy way to get the large white plastic bottom removed so that i can access the pump.


Hi\015\012\015\012\015\012 \015\012\015\012Thanks for using FixYa. First check whether the drain is not clogged or blocked and\015\012the line is not kinked. Check all the hoses for blockages & also clean the\015\012air gap. If you h ... Bosch Dishwashers

Candy CDI1012 Integrated dishwasher. When I turn on the dishwasher and start it - for some reason it can not go the whole way through the cycle. When I open the door the - programme light is flashing and water is still in the bottom of the dishwasher - ie mid cycle. The water will only drain if I put it into another program to drain away - but as the dishwasher was mid cycle - the dishes are not clean


Hello mm1973,It could be because of bad door latch switches / blown thermal fuse / blown or oversensitive control board. In all these scenarios, a dismantling of the machine is required. If you have no prior experience, I'd recommend get ... Dishwashers

Not draining I ran the dishwasher and it doesn't drain all the way. We cleaned all the lines on the dishwasher and even to the garbage disposal. What else can it be. It's a kitchen aid.


WATER OUTLET SOLENOID IS BAD OR TIMER ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I have an 18 inch frigidaire dishwasher that starts making a very loud noise a few minutes into the cycle and is not draining fully. has standing water. I cranked the dial all the way through the wash cycle but it is not draining either.


... Whirlpool 24 in. DU900PCD Built-in Dishwasher

Bosch SHU992SUC Dishwasher does not drain. It's not clogged in the external hose, the filters are not dirty. I moved the Dishwasher outside and ran it with the input attached to the garden hose and the output drain hose laying on the ground so there is absolutely no chance of restriction due to the way it's plumbed in. This model does not even show up on Bosch web site. I guess I have to start taking apart the machine blind with no service manual. Ideas? It's less than 10 years old I think. M


PUT THE MACHINE IN DRAIN MODE IF YOU DONT HEAR A HUMMING NOISE THEN THE DRAIN PUMP IS BAD. CHANGE YOUR DRAIN PUMP. ... Bosch SHU9925UC Built-in Dishwasher

Everything works except drain. I have 6 ohms resistance on the drain circuit of the motor. How can I test the control board? Is there some way to bypass it to know everything else is good? mod:DU945PWPQO


Check the following areas to combat this issue further. Use the connector pins on the back of the control to test its operational value.1. Air gap / Drain hoses If there is an air gap (located in\015\012the sink, near the fau ... Whirlpool 24 in. GU980SCG Built-in Dishwasher

Won't drain The water won't drain away, I have the top off and the spinner spins easily, but I can't seem to remove it. I have the screw driver trying to turn it while holding the 1" nut, I don't know if this is the way to get to the bottom of the pump. Its a kenmore fh3726568. built in.


Hi,\015\012Please follow the steps provided bellow :\015\012Fill washer with water and wait for the timer to get to the drain mode. \015\012Unplug the washer from the electric outlet. \015\012Open the case, and disconnect the ... Kenmore 24 in. 15689 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0624 seconds