Having problems with your Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer ?

Engine Stops after 10min run time - Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer


Answers :

Check the breather hole on the gas cap.
\015\012run the engine with the cap off and see if it still stalls.
Repair Help & Product Troubleshooting for Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No pressure when it is running - Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer


... Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer

No water pressure - Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer


... Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer

Engine Stops after 10min run time - Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer


Check the breather hole on the gas cap.\015\012run the engine with the cap off and see if it still stalls. ... Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer

Unloader valve - Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer


... Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer

Oil plug on troy bilt 020240 pressure washer - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Why is there gas in my oil - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer


Gas in the oil is usually indicative of a stuck float or needle valve in the carburator float bowl. If the needle valve is stuck open, gas will flow from the float bowl into the cylinder and then the crankcase even if the motor is not running. You ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Need manual for a model 050032 generator - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

ENGINE WILL NOT START - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer


My power-washer suffers from same problem after sitting idle.After paying for a new carburetor, I discovered how important it is to drain the gas if washer is going to sit idle.Another time, we had a problem with the screen co ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

How do you operate the soap dispenser - Briggs and Stratton 020275 Elite Series 3400 PSI Portable Gas Pressure Washer


... Briggs and Stratton 020275 Elite Series 3400 PSI Portable Gas Pressure Washer

Briggs and Stratton 020275 Elite Series Pressure Washer


You have a bad piston ... Briggs and Stratton 020275 Elite Series 3400 PSI Portable Gas Pressure Washer

Where do you find the model number on a elite series 6.75 hp 2450 psi briggs and stratton pressure washer?


... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Just bought a new Briggs Stratton 6 75 pressure washer. i put in a half a tank of gas in the tank and it started up. i ran the pressure washer until it was out of gas. put more gas in now it will not start.


Assuming you tried choking it when you tried to start it, verifiy its getting gas,if not tap lightly on the bowl of carburator. if it is getting gas, check for spark ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Briggs and Stratton pressure washer will not start. I have a 6.75 hp pressure washer that is only a year old. when I pull cord it turns over but does not start. I changed plug and checked it, I have spark when pulling. I have 40-50 psi of compression when pulling also. gas was drained and is brand new. it was working fine last time it was used. I have tried starting it without the water line or spray wand hooked up and no difference. After about 10 or 15 pulls, can smell gas when I am trying to


Hello dave, the problem is compression to low,you need 60 to 130 lbs to run engine,check for blown head gasket,or bad rings,or a stuck open valve,hope this helps,, ... Briggs & Stratton Pressure Washers

The power washer is not taking in the soap. - Briggs & Stratton Briggs Stratton Vanguard OHV 3000 PSI Gas Pressure Washer


... Briggs & Stratton Briggs Stratton Vanguard OHV 3000 PSI Gas Pressure Washer

Gas in oil in pressure washer - Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer


... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer

On off switch for troy bilt pressure washer - Briggs & Stratton Prosumer 20324 Gas Pressure Washer


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

2800 PSI Troy-Bilt XP pressure washer manual - Briggs & Stratton Prosumer 20324 Gas Pressure Washer


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Pressure washer got wet and will not start - Briggs & Stratton 2200 PSI Gas Pressure Washer


... Briggs & Stratton 2200 PSI Gas Pressure Washer

I have a Briggs & Stratton gas power washer. This is the 1st time this year that I have used it. I put in fresh gas, hooked up the water supply. The engine started and then quickly stopped. I had to release the water pressure in the hose before I could pull start the engine. The only way to keep the engine running is to hold down the spray nozzle trigger. Once that is released the pressure in the hose builds up and the engine stops.


Sounds like the unloader is not working correctly. Try replacing it and see what happens. ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Briggs and Stratton Troy Bilt gas pressure washer one year old. I can get water thru pressure washer and bleed the air, water comes out the hose just fine until I start the pump. Then, I lose all water flow. Pump runs fine but when it's running, no water goes through.


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Hi. I have a Briggs & Stratton 2800PSI gas pressure washer. I can get it to start, but after about 5 min, then it quits. I have cleaned the carb, change oil, changed plug, new gas, cleaned/checked air filter. Nothing will keep it running. Wondering if it may be not enough water pressure, but would that cause it to stop like that? When it runs, it does a good job, but it stops just as you get going. Do you have any other suggestions? Thanks!


If it wont start, check for spark.how you do that,ok take the spark plug wire out put it close to the sparkplug(use some gloves or something to insulate your self from get electric shot from the spark) find some one who pull the start rope, if you do ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

No water pressure @ all - Briggs & Stratton 020324 3700 PSI Pro Series Pressure Washer


... Briggs & Stratton 020324 3700 PSI Pro Series Pressure Washer

No pressure - Briggs & Stratton Prosumer 20324 Gas Pressure Washer


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Gas is leaking out of the air filter - Briggs & Stratton Gas Pressure Washer 20244


Replace the needle and seat in the carb ... Briggs & Stratton Gas Pressure Washer 20244

I have a Briggs & Stratton Pro 3400 pressure washer that I got new last year and used for maybe 5 hours and it worked great. Have had it stored since then with stabilizer in the gas (I didn't run it dry) and now it won't run for more than a minute or two without dying. A dealer said it was probably bad gas and I now know that even with the stabilizer I should have run it dry last year before storing. Everything is like brand-new including plug and air filter so it must be the gas/carberator gunk


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1075 seconds