Having problems with your Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer ?

Is there a drain plug to remove any standing water within the pump to prevent freezing over the winter? I have lost the manula that came with the pressure washer

Answers :

No, there isn't a plug to drain the water. There are a couple options though when it comes to winterizing your pump. Here is a link with the different options
\012I would recommend using Karchers Pump Guard, it works very well and can be assured that your pump is properly winterized.
\012Here is the information on how to use Karchers Pump Guard
Force air through the inlet and blow it all out works for me
Repair Help & Product Troubleshooting for Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Is there a drain plug to remove any standing water within the pump to prevent freezing over the winter? I have lost the manula that came with the pressure washer

No, there isn't a plug to drain the water. There are a couple options though when it comes to winterizing your pump. Here is a link with the different options\012 ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

I think I added too much oil to my pressure washer. It lost pressure after about 20 minutes, then smoke came our where the exhaust area is. I immediately turned it off. Then I noticed oil dripping from the oil filter. What do you might have happened and what should I do?

Drain the oil until the proper level is reached....let the unit sit for awhile until cool and then remove spark plug and clean it....i think it should be just fine....good luck ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

I have a Karcher 550M pressure washer and was using today when all of a sudden the water started to pour through the handle hence lost the pressure of the water. Is this a rubber washer issue or the gun needs replacing or simpler than that. To be honest although I have had the washer for about 3/4 years now It is hardly used. Also can I fix it and where would I purchase the allen key to replace. Thanks Brian

... Karcher Pressure Washer Gun 91120200 91120200

My pressure washer lost pressure... - Northstar Pressure Washer 3000 PSI

... Northstar Pressure Washer 3000 PSI

Pressure washer lost pressure in the middle of a job

The pressure valve has stuck in the high pressure position. This prevents anymore inflow and hence no further water will be pumped. \015\012\015\012Rebuild the valve... There are O Rings to replace and clean the bore with croocus cloth. ... Honda Pressure Washer PSI 3000

My Powercraft 9686 pressure washer has always been stored in my garden shed. It is 4 years old and when I used it last September the power washer had lost considerable pressure, as it was leaking water. Can I fix it for a reasonable price? Thank You. John O D

Put some silicon spray in inlet/outlet then reattach hoses then run it will proform after a while do this everytime you store it pryer to sroring away........... ... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer

I have had 3 Karcher pressure washers all experience the same problem and so have two of my neighbors. Our area has very hard water and it causes problems with the washer not bringing up the pressure when the trigger is pulled (or surges up and down) and the nozzles clogging, etc. The service repair facilities cannot tell me how to prevent this. Many attempts to contact Karcher for advice have been ignored. I have been thinking that perhaps running the engine for a few seconds with no hoses a

If your water is that hard (and it appears it is) WD40 will NOT solve the problem. You should look into a water softener. However, chances are that a small, inexpensive model will not have the flow capacity required for a pressure washer. You'll like ... Karcher K2.26 Electric Power Washer

New honda pressure washer maybe had it 2 years and only has about 3 hours on it, I was using it yesterday and it started fine and after running for about 10 min it shut down like i turned the kill switch, it has oil and gas but seems to have lost compression. It is a Honda overhead cam GCV 160, pressure washer is a Troy Built model

... Pressure Washers

Lost pressure Have honda excell 3200 psi washer. Was using it for about 5 minutes and it lost pressure. Has been working great to this point.

Try this dissconect hose and lance , and check for water flow through the machine , if theres none or just a trickle then you may have gunk in your inlet filter ( usually a small plastic gauze insert just where the water feed hose connects ) ... Honda Pressure Washer PSI 3000

Husky Model HU80833 pressure washer was working, then no pressure. What is wrong? Unit is over two years old. Had been working properly earlier in day. While trying to finish job, it lost pressure and nothing would make it get back up to pressure. Also tried it again later, same result

... Honda Pressure Washers

Power Washer lost pressure and is leaking through Pistol

... Karcher PSI Electric Pressure Washer

I'm in Afghanistan with a MI-T-M GH-3504-OEGH. We lost pressure from the pump. One: I'm looking for a manual for this Pressure Washer. TWO: Seal kit to fix the problem. I know they need to be high pressure seals or O-rings so I don't want to do a quick fix leaving us to rebuilding the pump again

... Mi T M Mitm 3500 Psi Hotcold Portable Gas Pressure Washer

I have a tpw 2200 pressure washer that has lost high pressure. i have low pressure but not high pressure.rn The machine i have is a titan tpw 2200 if some body can tell me what is wrong please help. Thank john

Pour a large amount of liquid TSP into the fresh water inlet where the garden hose connects and let is sit for a couple of days.\015\012This is how I fixed my pressure problem ... Pressure Washers

Xr2600 excell pressure washer I was using it and it lost water pressure does not have any pressure. the engine runs fine just don't know what the problem is.

I have the same problem and it seems the piston in the back has a ring and the ring is broken i half i'm talking it to get fixed tomorrow i will keep you informed. ... Honda Pressure Washers

Hi I have a Troy-Bilt Pressure washer 2200 psi model 20292. I've used it only 4 or 5 times. It ran great for an hour today then it lost pressure. Seems like the pump is not working. The engine runs fine but no pressure. The water runs through the nozzel and I blew air in the lines to make sure there is no blockage and found no blockage even in the pump lines. Any ideas. Tom

... Briggs & Stratton Gas Pressure Washer 20244

Hose lost pressure every few min. won't hold pressure for very long on a briggs and stranton pressure washer gas 6.5 engine troy built

... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

I have a model PW 2200 gas pressure washer. It suddenly lost it's high pressure the other day after working fine for @10 minutes. It's getting plenty of water, but the engine doesn't seem to rev up to give it the high pressure. The operating instructions say to check the oil in the engine, and the PUMP before starting, but I haven't found any place to check for an oil level in the pump????Any ideas, I'm very confused.

... Pressure Washers

Lost manual for K. E. W. HOBBY 88 pressure washer

Hi, Do you use the unit now. My unit of th same vintage has just failed and I would be interested in purchasing the same model slong as it works. Cliff Cason, Derbyshire DE6. Tel 01889 565574 mob 07711218929. ... Pressure Washers

Pressure washer lost pressure

... Homelite Ut80993 Honda Gas Pressure Washer

Pressure washer lost pressure

... Pressure Washers

Karcher B402 pressure washer Motor runs as soon as power supply connected, on/off switch does not seem to make a difference and no pressure at outlet? Was working fine, stopped for half an hour, came back and wouldn't work. Thanks Bob

Bob I had this happen to my Karcher, the pressure seals have blown. $Au200 for service and replacement from karcher dealer. tyhey would not sell the parts for a DFY ... Pressure Washers

Our Parkside pressure washer has water but no pressure, the manual of instructions is lost and I can't seem to find any on the internet.

Has water but not coming out ... Pressure Washers

I have a Campbell Hausfeld RBPW1810 pressure washer, It has two detergent tanks. I cann't get either to work. I just purchased the unit in June if this year and this is the frist time I am useing the unit. I followed the instructions (low pressure position on the nozzle) and the detergent came on for two second then stopped (only water then). What am I doing Wrong??? Rich From Alqonquin, Ill

Sometimes thinning the solution will help, but in any case make sure the line from detergent tank to pump is sealed, otherwise it just sucks air. I use a small hose clamp at pump. let us know ... Campbell Hausfeld 1800 PSI Electric Pressure Washer

Karcher pressure washer keeps pulsing when not in use and has lost pressure when in use

This can happen if the head of the pressure pump has split. You may need a new head, and to stop this happening again, tie the rigger open with a zippy tie. The water will run all time now and automatically bleed any air form the system. When you wan ... Karcher Pressure Washers

Pacific hydrstar pressure washer lost water pressure. Hose is fine when unattached. Replaced nozzles

... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1135 seconds