Having problems with your Briggs & Stratton Briggs Stratton 2000 Psi Pressure Washer Freeshp ?

Oil I have a Briggs and Stratton 2200 psi pressure washer. It doesn't specify an oil ~ other than to show a photo of synthetic pressure washer oil manufactured by them. I can't find that specific brand anywhere, what can I substitute it with? Ace hardware was stumped.


Answers :

Remember when your searching for something you can't find the internet is always your best bet. You should also use a good search engine; www.bing.com is one of the best search engines I have ever used. I searched some stores that have the oil your looking for, one online store is www.amazon.com and if you have one near you and they also carry it at Sears. The grade of the oil is definitely weird, 75W90. Also if you would like to look for other stores that carry it go to Bing and type "Briggs & Stratton Pressure Washer Oil" into the search bar.
Repair Help & Product Troubleshooting for Briggs & Stratton Briggs Stratton 2000 Psi Pressure Washer Freeshp

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Oil I have a Briggs and Stratton 2200 psi pressure washer. It doesn't specify an oil ~ other than to show a photo of synthetic pressure washer oil manufactured by them. I can't find that specific brand anywhere, what can I substitute it with? Ace hardware was stumped.


Remember when your searching for something you can't find the internet is always your best bet. You should also use a good search engine; www.bing.com is one of the best search engines I have ever used. I searched some stores that have the oil your l ... Briggs & Stratton Briggs Stratton 2000 Psi Pressure Washer Freeshp

I have a Karcher g 2500 vh gas pressure washer and I can't find what oil to use when changing the engine oil. It's not in the owner's manual that I down loaded and I'm not able to find this info on the internet... Can you help?


... Pressure Washers

I have two questions and would greatly appreciate some help: - What oil to use in the pressure pump of a Ryobi Pressure Washer RY80030? - How much to put in? The pump model is MTP092150 from FAIP. As per the manufacturer, the oil is not to be changed or topped up by the end-user, I know, I know, but brought to a service center instead - I certainly don't want to do that, and there is none close to my place anyway. The reason I need this is that I had to take the pump apart and a


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

I cant get water to spray from my pressure. the oil cap is throwing oil out the little hole. no pressure is coming out of the nozle. AR. model#SJV 2.5G27-1


... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

Model 01902 2350 psi . engine runs fine , sprays out nozzle but lower pressure and water sprays out plastic elbow on relief valve , that is supose to **** in soap if used , cant hold finger over spray from elbow , high pressure , took apart relief valve and plastic valves all orings are ok , brass pump seals look ok , all back together , still blows out elbow . ?? plastic spools were out by somebody else , not sure if they are in right , cant find picture to compare .


It sounds as if the non return valve in the elbow is the wrong way around .The o-ring normally goes in first then the ball then the spring. Try it and good luck. ... Pressure Washers

I have a sears pressure washer, model 580752300. The pump on the underside vibrated lose and broke a couple screws. It came off and the oil drained out. I replaced the screws and it's ready to go except I can't find out how much replacement oil to put back in. Sears has larger containers but won't tell you how much oil to put in. However, there's a pricey pre-measured container they want to make you buy. Anybody know how much oil goes in that pump?


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

Hi, I have a Dewalt pressure washer 3100 psi. I want to know why the pressure washer works okay for 1 hour then it stop working completely. the oil is fine, the spark plugs are okay, and when I tried to start it again it does not work. Can you please tell me what could be the problem? This pressure washer is almost brand new I have used it for only like 30 hours for 2 years that I have it. I used it couple times lately but same problem it works for 1 hour then it does not work any. I will


There are two common issues that will cause what you are describing. What you need to do is run the machine until it dies as you are describing. Then pull the spark plug and check for spark. If you do not have spark you have a failing stater. It is v ... Dewalt DPH3100 Gas Pressure Washer

Hotpoint fdw70 error code A10 have replaced the inlet water valve but still have an error code flashing A10 hoped to find a reset button but cant find it anywhere can u possibl advise.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Won start Was using the pressure washer 1st time this year and started on the second pull. Ran out of gas shut-off also noticed it needed oil. Believe, I put too much oil so, I drained some and added gas. At first, there was no resistant in the pull so waited an hour and tried again. This time the resistant was there on the pull but still would not start; no attempt even to turn over. It's been a couple of days...changed the spark plug although, hardware guy said nothing was wrong with it..still


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

I have a GENERAC brand pressure washer.I am not familure with these.I have no manual.So,what my question is....Do the pumps require oil or not?If mine does,where in the heck do you put it?And what type is it of oil is it?I need to know! THANKS!


I would love to help you ,but unless we can get an idea what size it is how much pressure it does etc its abit hard ,it will reqire oil, non foaming oil.my suggestionwould be to go to a shop that deals in these things and see if you can see one like ... Pressure Washers

Throttle problems Homelite pressure washer model UT80709A. bought it 10 months ago with no problems and stored it for last 9 months. Before doing so, drained gas, oil. Brought out of storage a few days ago, filled with fresh gas, oil, cleaned air filter. Starts great first try but after about 30 seconds the throttle starts visibly revving the motor a litlle at first then gradually faster and faster until it seems to flood and die. Then you cant start for about an hour and its the same story. Hav


... Homelite Pressure Washers

Indesit d41 dishwasher overfilling, pressure switch seems ok(checked with multimeter) ,when pressure switch is manually operated the electro fill valve remains open. only time fill vave shuts is when power is off or door is open. can someone please help as i cant find wiring diagram or service guide online


Possible faulty pressure switch or a faulty drain pump ... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

I have a dishlex global 270 i cant find a model no i only have a serial and manufacturers no. What i wanted to find out is does this model have an element that heats the water. I only have one hose and when i used it with cold water it didnt heat up so i am using hot water.


Hi\015\012\015\012\015\012Thanks for using FixYa. I hope you understand that no one can tell you what are the specifications of the product until you provide the model no# however, dishlex usually have element in their dishwa ... Dishwashers

I have gas in the oil fill and oil coming out of the exhaust of my Ridgid pressure washer. I lent it to my father who isnt mechanical at all so anything could have happened while he was using it. He has since passed away so he cant tell me if he did anything wrong to it. Its a Ridgid with a Subaru SP170 OHC Engine. Any help would be appreciated. Scot


Check to see if the oil is overfilled first.If the oil is at a normal level, the engine was probably overheated or ran low on oil.It is also possible that the machine was tipped over and oil ran into the cylinder. ... Pressure Washers

Hobart LX30 Thank you for your help earlier. I figured out a way to get the machine running on 220. Now my problem is finding the intake for the sanitizer and detergent. I have looked all over the machine and I cant find tubes anywhere. The guy I bought it off of tells me that when the water temp is over 170 you don't need any cleaning products. I just want a second opinion. I feel that our glassware is not as clean as we would like. Any thoughts?


I'm not sure I'm comfortable with the direction your seller is leading you. I assume this machine is installed in some type of place where you are serving food to the public. If this is the case, then the local health inspector will expect to see a w ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a coleman powermate pressure washer, model #PW0832000. It's over 10 yrs old, but brand new sitting in the box. Trouble is, I have no owner's (operator) manual. I would like to find one. Do you know a source to find one?


Well, you may be out of luck with Coleman's customer service. They have gone out of business, from what I understand. I have a pressure washer just like that one. You may be able to find one on ebay, or one online that someone has scanned. ... Coleman Pressure Washers

I have a generac pressure washer and the engine will not turn over. Followed the directions to a T and when I pull the cord... nothing. Spark plug? It is brand new out of the box. Filled high with brand new mid octanne gas, filled oil, followed directions to start... nothing.


... Pressure Washers

Briggs & Stratton WAP 9300P pressure washer pump oil brand


... Briggs & Stratton Pressure Washers

What kind of oil do I use in my pressure sprayer gemric brands to


Check with your local hardware store and your owners manual. Usually the oil to be used in a motor like that is SAE 20 3-in-1 oil that can be picked up at any hardware store. It comes in a red white and light blue bottle. (Note: Do not mistake it for ... Dewalt Pressure Washers

Just bought a jet usa 7.0HP 3950 PSI pressure washer, put it together and put oil in it and i cant pull the pull start cord out at all?


... Pressure Washers

How to change oil in a pressure washer


From the manual CleanShot 2050 Briggs and Stratton\015\012\015\012Change Pump Oil\015\0121. Drain engine oil and fuel from pressure washer\015\0122. Use an 8 mm allen wrench to remove black pump oil cap between high pressure ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

I have bought a fisher and paykel model DW60CSX1 second hand... i have connected all the relevant pipes and taps, the washer gets to a point in the cycle where it stops and thw 1st, 2nd and 4th lights flash and beep.. i cant find a users manual anywhere...


My manual says that this means the drain hose is crimped or bent, or the drain hose is too high. In other words, the drain can't drain for some reason. ... Fisher Dishwashers

Dishes don't get clean. don;t believe there is enough water pressure. worked early on, but doesn;t work like it did originally. have had for several years and don't find our papers and don't know the serial no., etc. of the brand, etc. we have been unable to get a service person in this area, but understand there is a person who works on dishwashers, which we may need to try.


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwashers

I have an apartment size galaxy dishwasher its all white with the turn diles i was just wondering if someone could tell me what it would be worth brand new i cant seem to find a price online


... Sears 24 in. 14181 Built-in Dishwasher

I have an almost brand new husky pressure washer (one of the big ones). It has been a life saver so far. just the other day it shut its self off. its gas powered so of course i checked the gas and oil. then tried to start it back up. but when I try to pull the pull string it wont come out more than about 3 inches. i payed 400$ cash for it to use on the trucks. does anybody know how to fix that? thanks


IT SOUNDS LIKE YOUR FLY WHEEL IS BAD OR NEEDS TO BE ADJUSTED ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0648 seconds