Having problems with your Briggs & Stratton Pressure Washer Projectpro Spray Nozzle ?

I see the oil plug on my B&S pressure washer but i can't reach it. (B&S 2000PSI) The pump bracket is blocking the oil plug, so you can't reach the the oil plug with a 3/8" drive socket wrench. How do you loose the oil plug??? stephen


Answers :

The motor is running squeeze tigger to spray and just hose water comes out no pressure behind it
Very often there are plugs on both sides of the engine\015\012or there is also one on bottomside.\015\012if not, use a vacuum oilpump to **** oil out of motor.\015\012good luck
Repair Help & Product Troubleshooting for Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I see the oil plug on my B&S pressure washer but i can't reach it. (B&S 2000PSI) The pump bracket is blocking the oil plug, so you can't reach the the oil plug with a 3/8" drive socket wrench. How do you loose the oil plug??? stephen


The motor is running squeeze tigger to spray and just hose water comes out no pressure behind it ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

I have a Pressure Washer VR2500 , 6.5 horsepower / 2500 PSI number on side 123K12-0134-E Residential - Excell. I do not know which is the oil drain plug for the Pump on the bottom. There is an Allens Wrench plug on the side. However when removed nothing comes out. There is also an Alans Wrench like plug towards the back, that does not want to come out. Which one is the correct plug and do you have a picture as I could not order an Owners Manual on-line? Please Advise!


Hi and welcome to FixYa, I am Kelly \015\012First here is the owders manual: \015\012http://www.excellpressurewasher.com/documents/p ... Comet GXD2527G Pressure Washer Pump

Husky hu80432 this is the second season for this washer like to change the oil cant find the drain plug


... Honda Black Max 2600 PSI Pressure Washer

Cant get to spark plug on troy bilt 2700 pressure washer


... Pressure Washers

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?


The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

Whers the oil drain plug on a troy-bilt 2350 psi


... Pressure Washers

Cannot figure out how to remove the oil plug to drain the oil. Label points to a spot that looks like it might be a plug, but can't figure out how to remove it. It is a 2500 psi Mdl VR2500 Briggs & Stratton engine Honda Power Washer. Ken from NH


Should take a 3/8" socket extention ... Pressure Washers

Have a PD2800 that has started to leak oil. lowered the oil level slightly but it started to again leak oil after just a minute or two of running from a cold start. Oil seems to be coming either from around the oil drain plug or from underneath the motor mounting plate. any ideas? Richard


Hi,There is a nice Troubleshoot article :-http://www.the-power-washer-advisor.com/pressure-washer-pump-repair.htmlHope i helped you.Thanks for using "Fixya". ... Dewalt Pressure Washers

My dish washer just stopped working, no power no lights no nothing. it is plugged in and the circuit breaker is not tripped the wires for to the plug are tight and i didnt find an loose wires, the gfc plug is not tripped either, any suggestions?


This machine has no power, and i would suspect a broken wire but you say the trip did not trip,have you got a voltage tester?if so set to x1k or until when you touch both points it workes.with the plug in hand put one point on the right plug ter and ... GE 24 in. GSD3630Z Built-in Dishwasher

Oil spitting from vent plug


... Honda Pressure Washer PSI 3000

Engine starts, but when i push in the choke, it kills. i just replaced the spark plug, drained the gas and oil and replace with new gas and oil. Starts fine when choked, but when i push in the choke, it dies.


... Honda 50 W Ar Pump 2500 Psi 25 Gpm Pressure Washer

I HAVE A NEW CRAFTSMAN PRESSURE WASHER WITH KEY START. I HAVE USED IT ONCE AND WHEN I TRIED TO START IT IT WAS HARD TO START HAD TO PULL START IT. NOW IT WONT START. LET PRESSURE OUT HAVE HOSE OH AND RUNNING, NEW SPARK PLUG HAS OIL, GAS FILTER FINE.HAS GOOD COMPRESSION, BUT WILL NOT FIRE GET SOME RECOIL. GETTING GAS TO SPARK PLUG AND GETTING SPARK. IM LOST PLEASE HELP.


... Pressure Washers

My Beko D3422 FS was washing normally and the residual current device tripped approximately half way through the cycle. I have unplugged the dishwasher and checked the plug socket with various other appliances. None have tripped the RCD. I have stripped the Dishwasher to look for any disconnected terminals or shorted wires and cannot find anything obviously burnt or any signs of shorting. The 13amp fuse in the dishwasher plug is fine. Are there any components I can test or replace which wouldgi


... Dishwashers

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

My Karcher 2400 PSI pressure washer is not starting after about 5 years. What type of spark plug and gap should I change the old out with and what kind of oil do you recommend. I don't think I have ever changed the oil but way less that 50 hours on the machine. Thanks


... Karcher 2500 PSI Pressure Washer

My indesit DIF 04 dishwasher has stopped working the start button, soak button and eco wash buttons are flashing continously, the machine will not turn off I have plugged it out from the socket but once plugged back in the same lights start flashing again


... Dishwashers

My dishwasher tripps out when it is plugged in, how can it be resolved? ----- when i plug the dishwasher into the socket, it cuts the power supply to some electrical points around the house. It trips out a switch in the electrical terminal box, what can i do about this?


There is a shorted component in the dishwasher that must be found and repaired. Requires hands on troubleshooting.Eric ... Dishwashers

When I plug in my dishwasher it trips my test fuse and none of my plug sockets work. Do I need a plumber or electrician?


Electrician. You have a short in the dishwasher which is an electrical problem. Is it tripping GFI outlet. If so the GFI is probably weak or overloaded. Try regular outlet not on the GFI circuit and see what happens. ... Dishwashers

Bosch dishwasher fuse keeps blowing as soon as it is changed and the plug socket is switched on. There is a flash coming from somewhere away from the socket itself, but it is hard to work out whether it's behind the dishwasher or to the side of it because it's obscured.


... Bosch Dishwashers

No power switched on this morning working ok came back from dog walk ; no power at all ,plug socket ok changed fuse in plug


... Baumatic 18 in. BFD47 Free-standing Dishwasher

I have gas in the oil fill and oil coming out of the exhaust of my Ridgid pressure washer. I lent it to my father who isnt mechanical at all so anything could have happened while he was using it. He has since passed away so he cant tell me if he did anything wrong to it. Its a Ridgid with a Subaru SP170 OHC Engine. Any help would be appreciated. Scot


Check to see if the oil is overfilled first.If the oil is at a normal level, the engine was probably overheated or ran low on oil.It is also possible that the machine was tipped over and oil ran into the cylinder. ... Pressure Washers

I have a roper dishwasher someone gave to me and it does not have anywhere to plug it in, no wires loose, and i dont see anywhere to plug anything into it.


Hi\015\012Look at the bottom in front. There is a small metal cover usually with one hex headed screw holding it. Remove the screw and then the cover and there should be one white and one black wire in there. Feed your power supply through the ... Roper 24 in. RUD3000 Built-in Dishwasher

I believe there is food plugging up the drain so therefore the dishwaher doesn't fully drain. I can't reach the food from the outside. How do I get to the drain to check if it really is plugged?


Most machines piggy back to the outlet of the sink via a Y piece. Undo the hose clip from this connection and try to blow back on it. The drain filter should be removed( if it has a catching filter basket) If blowing does not work you could try backf ... Whirlpool DP940PWKQ Free-standing Dishwasher

The fuse in the plug keeps blowing. Initially it would run for a while - sometimes 3 or 4 cycles - before blowing. It now blows the fuse the second that I plug in to the socket, even with the on/off button on the front of the dishwasher set to off.I'm keen to take it apart, but it's full of water as it blew mid-cycle. Is there a clever way to empty the machine without the power being on, or do I need bits of hose and sponges?A schematic blow up would also be extremely helpful.


Lower the outlet hose into a washing up bowl, it should then Drain. Check the heater to see if it is earthing you get to it by removing the right hand side panel. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

How to change the oil. Without turning the machine upside down how can you changew thew oil? There is no plug that I can see.


I don't know what brand/model you have, but mine has a Tecumseh engine, and you empty the oil by removing the oil filler tube and tipping the engine to the side (per owner's manual). There is no plug. ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0387 seconds