Having problems with your Briggs & Stratton Pressure Washers ?

Lost craftman 5.0 snow thrower manual - 22'' - Briggs&Stratton engine - tag info as follows -536-88150 - 276037 -serial no# 754712485S1C304C -other info - Family 58sxs1481ae - dtd 2005-09-05 - note- never used


Answers :

You can get the manual on link below. One of the 2 manuals will do. They are both 22 inch. And the only 22 inch craftsman made.
\015\012
\015\012http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0409623.pdf
\015\012
\015\012http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0522406.pdf
Repair Help & Product Troubleshooting for Briggs & Stratton Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lost craftman 5.0 snow thrower manual - 22'' - Briggs&Stratton engine - tag info as follows -536-88150 - 276037 -serial no# 754712485S1C304C -other info - Family 58sxs1481ae - dtd 2005-09-05 - note- never used


You can get the manual on link below. One of the 2 manuals will do. They are both 22 inch. And the only 22 inch craftsman made.\015\012\015\012 ... Briggs & Stratton Pressure Washers

I would like to purchase a Moyer Diebel U/C dishwasher for residential use. I have the option of purchasing a used dishwasher - it could be one of three models. Which one is the model he is trying to sell to me? 1. 501 HT 2. 501 HTN 3. 501 LT the owner states the voltage is 120/208-240 and heats between 150 f and 180f.He notes there is a 4 ft. cord at the back without a plug on the end of it but the model is rubbed off of the serial number tag.There are three switches on the lower right hand co


The way you mentioned the unit have a 4 ft. cord at the back seem like a 50l LT the best way to determent is open up the bottom plate and see whether there is a booster tank in the right hand side. \015\012Hope this can help you. ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

My husband and I bought a Whirlpool dishwashwer from Lowe's last year. They never gave us a manual for it. The model is DU1055XTSQ3 and the serial is FW3544287. Where can I get a manual to tell me how to use other functions on my dishwasher?


Go to managemyhome.com and register. This is a FREE service. Once registered, log in and locate the "Owner's Manuals" link under the "Home Manager" drop down menu. Type in the model number you provided and your owner's and installation manuals are ... Dishwashers

We just bought house that is five years old and the previous owner told us that the dihwasher had never been used. It is a Hotpoint Model 3400G02WW, with serial # LG804739Y. It will not come on, and does not appear to be getting any power at all. We have checked cuircut breakers and they are not tripped. Have not looked any further yet. Any suggestions?


The dishwasher should be plugged into a GFCI outlet, most likely in the cabinet under the sink. Check to make sure the outlet has not tripped. There should be test and reset buttons on the outlet. Reset it and try again. The GFCI outlet has a finite ... Hotpoint 24 in. HDA3420Z Built-in Dishwasher

Overfill Hi Mark ,my Hotpoint BFI 62 at very first use ,takes water but in few minutes later water come out from floor and after that you can hear water drains out,Heavy Duty cycle light flashing rapidly,after some advice looked exactly source of water is from pipe connected to overflow system. That mean it is filling more than required,how it possible new Dishwasher never used before? Please help me to repair because we never try when I bought now is to late for company warranty. [email protected]


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Purchased a used Monogram Dishwasher/no factory info was included


First, here are some tips to help with your model number: look for an aluminum tag--or a silver or white adhesive label. The model number may be printed or \015\012\011stamped onto the tag and it may be written in two different type sizes or styles. ... GE 24 in. Monogram ZBD6880KSS Stainless Steel Built-in Dishwasher

I have a Kenmore 665.13873 Pro dishwasher about a little over 3 years old. I never know when the sosp dispenser is going to open and sometimes when it does open, the pack is still in tack and unused , even when I used the powder, it did the same thing. My glasses are always cloudly looking. I use the Cascade action packs. I have never been satisfied with this dishwasher although it is suppose to be top of the line. I paid a little over 1,300 for it. It is very quiet which I like, but I neve


... Kenmore Dishwashers

I used the "rinse only" cycle on the dishwasher a little while ago. I've never used this cycle before. After dinner I tried to start the dishwasher, but no other buttons on the panel respond except the last one I used, which is the rinse only cycle. I push and push, I tried pushing and holding, nothing works, I get no lights no anything. I've been using the "light wash" cycle for a long time and I normally just push the start button and the last cycle used starts automatically, so I wasn't a


Try un-plugging the dishwasher (check for cord under the sink) or turn off the breaker to it to re-set the control board. If this does not resolve your issue you may have a defective key panel. ... Dishwashers

Model GU2700XTS81 purchased a few months ago. Dishes come out with chalky white film on them. I am currently using Palmolive Eco liquid and Cascade Crystal clear rinse. At first I thought I might be using too much detergent so I cut it almost in half with the same results. I don't think it's the water because I never had this problem before. I use adaptive or normal wash and Heated dry. Please advise


Switch your detergent to Cascade powder. Then use Dishwasher Magic (or something similar) to remove the lime/scale build up and to clean out your pump. SG ... Whirlpool Dishwashers

Unit has been out of use for about 4 years - bought from Daimaru Auction and never used since. Have questions as for how long maschine can bee without beeing used and what i have to look at reusing unit after such long time of storage. Unit is very well presented, no any damages or visible defects


Hi,\015\012\015\012As you have told us that the machine is very well presented with no damages or visisble conditions, but before using it i would advise you to put some lubricant on the machine parts(not electrical ) before using it. ... Dishwashers

Pump problems we have a mobile car wash service that we use in the winter months we have a 300 gal tank and several power washers.we use 3 diffrent machines [email protected] gal 2500 [email protected] and a3000psi @3.0 gal i;m having a lot of pump problems with all of these machines.a friend that he thinks that the hose that the machines feed of is to small 3/4'' he suggests i use a1 1/2 hose as close to the machine before adapting to the 3/4'' fitting right now it;s about12'' long away from the tank.any info wo


Are you only using gravity to feed the machines. The law of gravity is that, for every foot of elevation you will get 2 PSI ( pounds per square inch) of pressure. You can figure out the minimum volume that the manufacture requires and make sure that ... Comet GXD2527G Pressure Washer Pump

Had the Northstar 3000 psi Pressure Washer for 2 months and it started leaking oil from the pump during use. Took it to Northern and they are replacing the pump under warranty but said it was likely because I was using quick connects on my garden hose coupling and that was restricting the water flow making the pump overheat. They said never to use quick connects on the garden hose unless the opening is at least 5/8". Does anyone make such a quick connect? I hate having to screw the garden hose o


It is easy to check if your hose and quick connects are supplying enough water to the pump. Your pressure washer gallon per minuite requirements are printed on the machine and also on the pressure tips in GPM. Your post indicates 2.5 gpm but check yo ... Northstar Pressure Washer 3000 PSI

I used the air dry/control lockpress and hold. I have never used this button, and it got pressed. I do not know how to clear this button so that i can use my dishwasher again. Cancel does not work. How would I clear this button.


Press and hold the air/control button again or turn the power off to the dish washer for a few and turn it back on and it will reset back to factory settings ... Dishwashers

I have a dishwasher that hasn't been overly used ...and if ... only use the quick wash. Now when I turn it on it gives the sound (normal) as if draining but never stops and starts filling with wa


Sounds like your timer control is bad or not working properly, you might be able to get that part pretty cheap depending on the model. Hope that helps you. ... Dishwashers

Dishwasher is brand new, never been used , plugged in, won't star


Maytag's quality control CANNOT check every unit that comes off the assembly line, so occasionally a bad unit can pass thru, it is fully covered under the manufactures warranty, contact your nearest Maytag authorized service center for repair or repl ... Maytag MDB8601AWB Built-in Dishwasher

Dishes are rinsed before going into machine but when the cycle is finished they are spotted and have bits of food sticking. I have cleaned the filter - do you know what dishwasher cleaner I can use. I note that the two avaiable in the supermarket both say Not for use in dish drawers'. JHB


Make certain that the spray arms are not clogged and are actually turning during the wash cycle. Try using Jet Dry in the rinse dispenser. Make certain that the dishes, etc. all facing the center of the tub and not nesting (behind are in front of o ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a dishlex global 270 i cant find a model no i only have a serial and manufacturers no. What i wanted to find out is does this model have an element that heats the water. I only have one hose and when i used it with cold water it didnt heat up so i am using hot water.


Hi\015\012\015\012\015\012Thanks for using FixYa. I hope you understand that no one can tell you what are the specifications of the product until you provide the model no# however, dishlex usually have element in their dishwa ... Dishwashers

I have mold in my dishwasher. This happened about 6 mos ago and I used the vinegar and scrub method to get rid of it...it was a pain in the fanny! Now the mold is back...the dishwasher has also not been drying the dishes very well either, although in truth it never has. There must be some other reason that the mold is back! Oh, and I've used Jet Dry since I bought the machine 7 years ago, and have tried the ''leave the door open to dry the dishes'' .... any thoughts?


Get rid of the mold - Pour about 2 cups of bleach in the dishwasher with about 1 cup of salt, and a gallon of cold water, use the light wash, not heated. Make sure when you start the cycle it doesn't drain first or you lose the bleach. Also I don't ... Dishwashers

Cloudy Dishes My dishes have just recently started turning cloudy with white fllm. This has never happened before and the dishwasher is approximately two years old. There is no issues with hard water, and have used Jet Dry, have tried cleaning it with bleach and vinegar, and have used soap and no soap. Please give me suggestions as to why this would start occurring now. I took off the inside panel and it was full of all kinds of gunk which I since cleaned out. I would like to know how to avoid t


There is a new product out that filters the water going into your dishwasher. the film or cloudy white look is caused by hard water. this filter eliminates the problem and is very affordable. you can get it at dishwasherfilter.com. i was amazed how c ... Dishwashers

My Bosch dishwasher SHU3306UC/12 isn't cleaning the dishes as thoroughly as it used to. Also, there is a hard-water film on all my glasses. That never used to happen. I have had the dishwasher about 8 years and it has run fine, except for about the last 6 months


Hi\015\012\015\012Thanks for using FixYa. First of all please check the Water temperature by using a thermometer inside the dishwasher to measure the water temp. It should be as close to 125 degree F to 140 degree F as possible. Now try u ... Bosch SHU3306UC Built-in Dishwasher

Hi I run a restaurant and have just purchased a used Hobart Hi-Temp Dishwasher but it came without a manual and I want to hook it up. the model # I can make out is AM-12 it also came with a booster, could you give me a parts list of hook up and also is this a 3 phase or 1 phase and what is the amp load what conductor cable to use, sort of info I need Dale


Since your question requires a lot of typing i.e. complete manual which is not feasible over here. Hence, I am offering few links from where you can get your owners manual. Hope this will solve your problem.\015\012 ... Hobart Dishwashers

The glasses and cups have specks in them that don't rinse out. The soap dish doesn't clean out. I have take all the arms apart and cleaned them. There is no build up. We live on a lake and use filtered lake water. I have tried every kind of detergent. Washer has never performed well. It is about 4 years old but only used in the summer.


Maybe try rinse aid like jet dry, some people forget to keep the rinse aid filled up or the rinse aid nozzle gets a encrustation build up from the rinse aid.Also check your water for hardness, you may need to use a water softener to remove hard ... Maytag MDB9600A Jetclean II Built-in Dishwasher

She6af02uc bosch dishwasher Light is flashing, but won't start. I used it earlier today and it worked fine. Like I said the time light is flashing, but I cannot change settings nor will it start. Turned it on and off a few times to no avail. Did I lock it or something? How does one unlock it? Hardly used and only a couple of months old... Never had this problem before!


... Bosch Dishwashers

Not cleaning dishes, leaving small food/debris on bottom, never did this before. and yes, using right detergent, rinse, temp, etc. tried running a cleaning agent twice. 2-year old profile, never had the problem until recently.


Put some CLR on the jet sprayer and use an old tooth brush on the jets.Cleaners do no good if the jets are blocked ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Leaking dishwasher I have replaced the rubber grommet around the soap dispenser latch and have double checked it for leaks.It is not leaking and I suspect that was never my problem.The water is coming from the lower right hinge area.I do not qualify for the maytag recall.I have never used the rinse aid dispenser but find it peculiar that there is no rubber washer in sight.Could I have a bad door seal? Maytag Model #DWU7402AAB


Hi there, dishwasher leaking might be due to either of these causes, check these:Main tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dishwasher, the foll ... Maytag 24 in. DWU7402 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0938 seconds