Having problems with your Briggs & Stratton Pressure Washers ?

Troy built pressure washer model 020209

\015 Surging engine, then dies\015

Answers :

Repair Help & Product Troubleshooting for Briggs & Stratton Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Troy built pressure washer model 020209


... Briggs & Stratton Pressure Washers

Troy Built pressure washer starts up fine and idles nice. Start spraying and everything is fine for about 30sec to 1min then the engine just shuts off. Seems like pressure is building up and choking the engine out. If I dont spray it will idle all day long. I have cleaned the unloader area, still shuts off. I have the pump off the machine, what should I do? Model number 020208 Troy Built. Rev # 01


... Pressure Washers

New honda pressure washer maybe had it 2 years and only has about 3 hours on it, I was using it yesterday and it started fine and after running for about 10 min it shut down like i turned the kill switch, it has oil and gas but seems to have lost compression. It is a Honda overhead cam GCV 160, pressure washer is a Troy Built model


... Pressure Washers

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.


A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

Troy Bilt pressure washer model 020209 has very low spraying pressure. How do I repair the pump?


You are going to need a pump seal kit or they may call it a rebuild kit but this sort of thing happens often and you should not have any trouble getting the parts you need with the kit should come a exploded view diagram but request one just to make ... Pressure Washers

Oil for Troy built pressure washer model 020207


... Pressure Washers

I have a Troy Built Pressure Washer Model # 01903. It has snapped a bolt off in the pump head area and is leaking H2O. What is the part number of the repair kit for this problem and where can I order it??


... Pressure Washers

I have a Troy Built Pressure Washer Model # 01903. It has snapped a bolt off in the pump head area and is leaking H2O. What is the part number of the repair kit for this problem and where can I order it??


... Pressure Washers

I have the 2600 psi pressure washer from troy built and I'm unable to find the model number and sn


... Pressure Washers

We have a troy built pressure washer model 2700. What is the ratio on soap to water that it dispenses?


... Pressure Washers

Troy Bilt Pressure Washer Model 01902 Leaking Gas from Air Filter


Try banging lightly on carberator with block of wood or something to free up float and valve!!!! ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started. I have the same problem. Water flows thru the pump when not running, but no flow or goes in by-pass mode when I start the pump. The pump being Troy Bilt Model 020296-01. I replaced unloader valve even. Anything else I can do?


You replaced the unloaded valve. Are you positive you have the unloader screwed to pressure and not turned the opposite way? You will have no pressure if it is adjusted wrong. One other thing I have encountered is that the unloader has a ball bearing ... Pressure Washers

Frigidaire built in dishwasher model PLD2855RFC1. Have to wash dishes pretty much spotless prior to using dishwaser. Glasses come out with what appears to be soap residue regardless if powder or liquid. Did not use a gauge but water pressure in rest of house is good, recently replaced water heater, pressure regulator and just replaced the dish washer water source valve. Washer is about 18 months old, has never worked really well.


Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Frigidaire PLD2855RFC Dishwasher

NO water coming out troy built 2200 pressure washer


Did you install the key on the flywheel ... Pressure Washers

Have a troy built pressure washer and the gas is leaking out help


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Have a troy built pressure washer and the gas is leaking out help


The float is stuck you can either take it apart and clean it or you might get by by just tapping lightly on the fuel bowl on the bottom of the carburator to unstick the float ... Pressure Washers

Troy built pressure washer engine timing


... Briggs & Stratton Pressure Washers

Hi I have a Troy-Bilt Pressure washer 2200 psi model 20292. I've used it only 4 or 5 times. It ran great for an hour today then it lost pressure. Seems like the pump is not working. The engine runs fine but no pressure. The water runs through the nozzel and I blew air in the lines to make sure there is no blockage and found no blockage even in the pump lines. Any ideas. Tom


... Briggs & Stratton Gas Pressure Washer 20244

Hose lost pressure every few min. won't hold pressure for very long on a briggs and stranton pressure washer gas 6.5 engine troy built


... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

My Troy Bilt pressure washer (Model: 020296-01) idle is up and down. When I engage the trigger I get pressure for a second and that's it. If I squeeze the trigger a second later I get the same thing and so on. Is it just the idle that needs to be adjusted or something else?


... Briggs & Stratton Pressure Washers

Troy Bilt pressure washer model 020489 has very low spraying pressure. How do I repair the pump?


... Pressure Washers

How to adjust the pressure on a troy-bilt pressure washer model# 020242


... Pressure Washers

Troy-built xp 3000 max pressure washer with no pressure


... Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489

My Troy Built pressure washer shuts down when I turn on the water. Is the pressure cut off valve that might be frozen?


Hold the trigger of the pressure nozzle open. Turn on the water . Wait to see water coming out of the pressure wand.Then try and start the engine. They can get air locked. ... Karcher 2500 PSI Pressure Washer

I have a troy built 2450 pressure washer. The engine runs fine but I have no pressure out of the hose. Does the pump require that you put oil in it?


Do you live where it is cold in the winter? And did you winterize the pump this past winter if it is cold? They need to be winterized or pump damage can occur. ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1399 seconds