Having problems with your Campbell Hausfeld Pressure Washer Gun - Electric/Gas Up To 2200 Psi - PW102400AJ ?

I can't get any water pressure out of the gun itself, it was working fine, then it just stopped. Any suggestions? Is there a way to take the gun apart and clean out any deposits that might have built up in the shaft?


Answers :

Yes you can take the gun apart it usually unscrews from the middle.
Repair Help & Product Troubleshooting for Campbell Hausfeld Pressure Washer Gun - Electric/Gas Up To 2200 Psi - PW102400AJ

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I can't get any water pressure out of the gun itself, it was working fine, then it just stopped. Any suggestions? Is there a way to take the gun apart and clean out any deposits that might have built up in the shaft?


Yes you can take the gun apart it usually unscrews from the middle. ... Campbell Hausfeld Pressure Washer Gun - Electric/Gas Up To 2200 Psi - PW102400AJ

I own a whirlpool quietpartner II dishwasher model DU600PWKQO serial no. FP0408764. I've had it for 7 years now. I would like to know the best way to clean it. I think their might be a bit of calcium deposit from the water. Can i use white vinigar to clean it? Let it soak for a while? What's be best way to clean it. I don't have the manuel anymore. Thanks, Liliane


... Whirlpool Dishwashers

Our 16 year old dishwasher takes way longer to finish cycles, has become very loud and now no longer cleans the dishes - especially the top rack and the silverware. We have hard water and I have run it with vinegar in a bowl 3 times and have been cleaning all the deposits I can today. It doesn't seem to be draining out all the gunk. Water flow seems ok, the arms have nothing blocking them. Any instructions for me to follow to clean out the mechanisms? Or has it run its lifespan... Thanks!


Parts are no longer available for your dishwasher. Typically - manufactures end support after 10 years.Your hard water deposits will never come all the way out. They will be "clean" for a month or so until another calcium chunk breaks free and ... Dishwashers

THE SOAP RARELY CLEANS COMPLETELY OUT AND SOMETIMES THE DISHES ARE LEFT DIRTY. I HAVE ELIMINATED; 1) INCOMPLETE CYCLE. AND 2) NOT USING FRESH DETERGENT. I'M THINKING THAT IT MIGHT HAVE SOMETHING TO DO WITH THE SOAP DOOR/LATCH LINKAGE. IN ORDER TO TAKE CARE OF THIS NEED TO TAKE THE DOOR APART. I JUST NEED TO KNOW IF I'M HEADED IN THE RIGHT DIRECTION, OR IF THERE'S SOMETHING ELSE I NEED TO CONSIDER.


Hi, Just to make a suggestion before you tear into the soap dispenser, Have you tried using a liquid detergent made for dishwashers instead of the powder? If not, try this to see if this takes care of the problem. It couldn't hurt. Keep me posted. ... Dishwashers

My GE dishwasher Model#MLD4007L20WW does not clean the dishes. How can I take it apart to clean out debris?


... Dishwashers

My viking dishwasher is not getting the dishes clean in certain areas of the dishwasher - they come out with food still on and/or greasy residue still left on. There is a white residue on alot of the glasses. Seems like it might be calcification - any way to clean the dishwasher to break down any calcification? might also be that water is not heating - how to best determine that? email is [email protected] and phone is 540-316-1263


Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... Viking VDB450 Dishwasher

My dishwasher was not getting the dishes clean, so i started taking the lower end apart to clean, got to a gray wheel looking object with a screw in the top which was recessed and still the wheel looking object will not come off, it will spin but will not come off, I need to finish taking it off because I dropped a screw down in the bottom area where the water settles.


If there is still standing water in the bottom of the dishwasher, remove it with a wet vac then look for the missing screw. It might be in the vac.\015\012\015\012If no luck, try using a good small stick magnet to retrieve the screw. The ... Maytag 24 in. MDB4000 Built-in Dishwasher

Honda GX 240 on woodsplitter stopped running. Tries to fire a couple of times each pull but dies. Found debris in gas tank. Cleaned out the tank and hose to carb. Cleaned out the sediment cup. Cleaned out the rust and debris from the bottom of the float bowl. sounds like debris in carb jets? Is it worthwhile taking the carb apart and cleaning it, or just order a new carb?


Install a new plug, and make sure your gas mixture is not to rich, And you air cleaner is clean ... Honda 8 HP Engine

I have a Maytag Dishwasher MDB4100aww that is not cleaning dishes effectively. There are small particles of food left on the dishes and some of the tougher food items to clean are staying on the dishes. The sound of water swishingspraying within the dishwasher seems to be quieter than when originally purchased (about 8 years passed). I had a local repair man take apart some of the internal pieces and clean them but it has not helped. Any suggestions?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Maytag 24 in. MDB4100 Built-in Dishwasher

Does not get my dishes clean, leaving a film on my glasses, not getting food off. tried to take apart to clean but could not figure out how to get bottom filter out with the large water bracket going up the back of the dishwasher to the top water bar. I bought as a store model, no instruction booklet. How do I clean out bottom filter?


The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the ... Jenn-Air 24 in. JDB1100AW Built-in Dishwasher

I had a mouse get into the under part of the dishwasher. He/she/it got trapped and died. The smell made us aware of the problem. I had to take apart the bottom of the dishwasher and take out all the tubes to clean them. Very messy... My question...I took care to note where all the wires went, but somehow did not take care to note where all the tubes go. Can you advise or show a schematic. I have a Bosch SHy56 stainless dishwasher.


There are no diagrams available of this - however using some logic - you can figure out the path of the water.A picture of the bottom of the washer would be helpful as well.Water comes in from the water inlet hose to the pump. ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I have a Maytag dishwasher, Model MDB4100. Are there directions for removing the cleaning equipment in the bottom of the dishwasher? I do have the manual and there are no instructions to do this. I am getting scummy buildup around the drain and suspect it needs a good thorough cleaning that I can't do without taking it apart. I have tried to clean away the "gook" but it reappears after a few washes and I can't reach the back. Thank you, Cara


... Maytag 24 in. MDB4100 Built-in Dishwasher

Over the last several weeks the dishwasher is getting the dishes less and less clean. I am sure the loading is not the problem, the water is OK and the detergent is OK. Is there a filter I can clean...or can I take something apart to clean or to check?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. Please make sure that the soap is\015\012stored in a dry environment and it is not stale and clumping together. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Making a noise and not cleaning very well Can i take apart the dishwasher and clean it and make sure that the drain is not clogged?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

I have a westinghouse sb907 dishwasher that doesn't clean the glasses properly. I thinh the upper arm might not be turning. have tried cleaning it, but can't take the upper arm off. How do you do it? and any other suggestions PLEASE


... Westinghouse Dishwashers

Bottom rack cleans fine, top rack doesn't clean at all - can I take apart the top spray arm?


Yes, the spray arm can be removed and cleaned out.Also, clean the 3rd (very top spray area) located attached to the top of the dishwasher. You want to make sure this small (1 inch size) piece can spin freely, so water can rinse the upper ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Have a Whirlpool Model GU1200XTLQ3 that makes this God awful noise when running. Did what your post said about cleaning the chopper and found glass. Replaced it back and I'm still getting the noise. Is there a way to check the pump from inside. In other words, if I take the chopper back is there a way to check out the pump


... Whirlpool Dishwashers

I have a mid 60's 6 hp Tecumseh engine on a Troybilt tiller. I used it to till my front yard and it ran fine. I let a friend use and it quit on him after a few minutes. It will not start. It has spark at the spark plug. I have thoroughly cleaned the carburetor by taking it apart, soaking it in cleaner, blowing out all holes and passages. I made sure the tiny holes in the power valve at the bottom of the fuel bowl are open. I have taken this carburetor apart five or six times over the years an


... Karcher 2500 PSI Pressure Washer

Amana dishwasher, model adb2200aws, ser #, 26650464e. history: quit running, no lights, nothing. replaced the door switch, ran for three days, replaced the switches on both sides of door switch, ran three days, quit. replaced the circuit panel , ran one time, quit. not lights, nothing. when I take it apart sometimes, that is take off inside cover on door, it might run or not. seems like the current isn't getting in as no lights will come one.


I have the same problem with mine as well but I found out that if you take a space heater to it and warm the control panel up for about 5 minutes, everything works great. This model of dishwasher seems to be problematic in any environment under 70-75 ... Amana Dishwashers

My dishwasher filter keeps getting plug up with large food particles. I take it apart and clean the screen. It works for a 2-3 -4 weeks before I have to do it again. There is a spinning fan on the screen. I'm wondering if this scrapper fan is working at all. If it was I think it would keep the small screen free from particles. The first thing that happens is the top cleaning arm stops working.' Thanks


Hi Judy. The only way to know for sure is to power up the fan independent of the machine and see if it still works. In the meantime, rinse and remove all debris from the dishes prior to placing them in the machine, including pots and pans. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Whirlpool ADG 7550 integrated dishwasher not cleaning properly. Ive checked the filter and there are no signs of blockage. There is no unusual beeping but there is however a weird motor noise that just appeared. Dishwasher appears to run through the cycles but most of the time there is still traces of food left behind. It takes about 3-4 washes to clean the plates. Sometimes there is a lot of soap residue left around the release door which leads me to believe there might be a pump issue? ive ope


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

Our Maytag Quiet Series 400 has stopped getting the dishes clean..It leaves residue and food on the dishes.My husband has taken it apart and there is nothing that he can find that might cause this.We have changed dishwasher soaps etc I do have to point out that the "Auto Clean" on the panel no longer works


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag 24 in. MDB9750AW Dishwasher

The glasses and cups have specks in them that don't rinse out. The soap dish doesn't clean out. I have take all the arms apart and cleaned them. There is no build up. We live on a lake and use filtered lake water. I have tried every kind of detergent. Washer has never performed well. It is about 4 years old but only used in the summer.


Maybe try rinse aid like jet dry, some people forget to keep the rinse aid filled up or the rinse aid nozzle gets a encrustation build up from the rinse aid.Also check your water for hardness, you may need to use a water softener to remove hard ... Maytag MDB9600A Jetclean II Built-in Dishwasher

I have an older GE potscrubber 1000 and it looks like mold is collecting in the bottom. Dishes are not getting clean. Can I take apart the stuff on the bottom to clean it all? Why would this be happening?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers

Whirlpool mod # GU2400XTPS6 Loud during wash cycle. I've cleaned under lower spray arm...took it apart, all the way to grinder blade and screen. Cleaned out toothpicks, broken glass, shop-vac'd the area. Noise seems the same when I put it back together.


Hi\015\012\015\012If you have opened all the way to the impeller and cleaned\015\012the drain pump assembly completely then the issue is with the pump that is bad\015\012and should be replaced. You can also check this video for replacing/ ... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0812 seconds