Having problems with your Campbell Hausfeld Pressure Washers ?

Oil is mixing with water in transmission

\015 The oil in the transmission is a milky color so i can only assume its mixing with water what can i do to fix it\015

Answers :

You need to reseal the pump but look for cracks it might have froze during the winter
Repair Help & Product Troubleshooting for Campbell Hausfeld Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Oil is mixing with water in transmission


You need to reseal the pump but look for cracks it might have froze during the winter ... Campbell Hausfeld Pressure Washers

Comet tw 5050 mix oil and water


What you have is a bad seal or a crack within the pump crack more common if any water was left in it during the cold winter ... Comet Pressure Washer Tw5050 Triplex Pump 5000 Psi Fits 24 Hp Motors

Water mixing with pump oil - Pressure Washers


Hi, you have not said what type of machine you have, but when this happens it could just be a oil seal in the pump,not a pressure seal.\015\012could be a worn piston. ... Pressure Washers

Water mixing with oil in pump section - Honda Pressure Washer PSI 3000


The seals are bad. Your pump needs a rebuild or replacement. ... Honda Pressure Washer PSI 3000

I have a Comet 4040 and oil and water mix is bubbling out of the red cap on top of my pressure washer. Can anyone tell me what repair kit I might need to fix this problem?


Hi this could be the oil and pump seals worn. Also make sure that you don,t have the transit plug in or the pump cannot breath. It should have a air vented dipstick. ... Comet GXD2527G Pressure Washer Pump

We have a Pressure washer 2600 PSI it is hooked up to the water line and we have a bucket of mix of 50% bleach and 50% water there is no suction coming from the line into the washer to mix with the water Why?


You need a soap nozzle to lower the psi is call downstream injection. ... Electric Pressure Washers

We have had this dishwasher for approximately 2 years. Dishes do not clean well. For example, I put a mixing bowl in that I just mixed brownie in--and the bowl did not come clean (simply a thick chocolate mix). Glasses do not come clean. They always have a fine residue on the outside (food). My husband just took the (blades) out that spin and dispense water and cleaned them. The water volume seems better now. Still, if I remember correctly, the dishwasher cost around $900. It definitely


Check if the water gets hot . \012\011check if motor spins enough to give pressure water on arms to clean dishes.\012\011clean the filter regulary . ... GE Profile PDW8480JSS Built-in Dishwasher

Pressure washer is getting water in oil


... Pressure Washers

My problem with Karcher K2-59M is doesn't switch off when releasing spray trigger and it leaks water from two small holes in water inlet tube. I have stripped the washer down but find no solution. Also some oil has been lost how does one replace the oil?


These units normally use a flow switch which actually feeds the pump motor failure to shut down causes overpressurization in pump head causing pump failure oil is normally sealed replacing the oil, pump has to be separated from motor and possible sea ... Pressure Washers

We have gravity water feed and is not filling up quick enough. Could i mix with hot water as well.So putting in a y to mix cold and hot together. Thanks Dave Williams


Hi dave. actually you are supposed to fill a dishwasher with hot water only.\015\012\015\012the long term fix for your gravity feed water system would be a shallow well pump.\015\012\015\012please rate my answer as a fixya ,t ... Hoover HD95M Free-standing Dishwasher

Lack of pressure in a karcher 455. motor powers on changes sound as trigger is depressed but water remains at mains pressure. oil replaced and had no water in old oil. any ideas.


Most cases the engine is used on many different units find one of those for a pump ... Karcher 4.550-620.0 pressure washer part 45506200/4.550-620.0

My Troy Bilt power washer (using Honda GCV160 engine) has no pressure coming from the pump. I checked the water flow, everything seems fine. I believe the pump needs oil added, however, I can't seem to firgure it out (how to add oil to the pump). I did notice that previously, I used to see drops of oil coming from under the pump. I I have a bad seal, can I add oil and test the pressure before I change the seal? Please advise.


I had a similar problem. Turns out I had left the hose disconnected and some sort of wasp built a paper type nest inside the washer tube that the hose connects to. I had to take the pump off and take apart and then cleaned it out with a screw driver. ... Honda Black Max 2600 PSI Pressure Washer

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?


The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

Karcher 6.85 replaced seals as they were worn out and passing water into the oil now when I turn it on motor runs turning water on water comes out of outlet (which is ok??) but does not pressurize with hose disconnected. My Bosch pressure cleaner passes water through but when pump is started it pressurizes. Is it bypassing? Thanks in advanced


... Pressure Washers

My dishwasher fills and runs but the water does not drain out of the machine and I have dirty water that then mixes with clean water to rinse the washed dishes and stays in the bottem.


There is a drain hose for your dishwasher that often gets clogged. Remove the drain hose and clean it out. reinstall the hose and your dishwasher will drain. The dishwasher should have a panel to remove and then comes out easily, just be careful not ... Whirlpool GU2400XTP Built-in Dishwasher

Changing oil on a high pressure washer with Comet Water Pump


... Comet BXD2527 Pressure Washer Pump

Starts but does not keep running. checked oil & its full. do you need water pressure at the pump? I know it has a low oil pressure cut off.


First: check and change the spark plug and do a oil change (OIL IS NOT THE PROBLEM BUT IS GOOD TO DO IT) then do a test with fresh gasoline.\012Second:check all fuel components (LINES,CARB,ETC...)\012Third:if any of this fix the problem ... Dewalt DPD3100 Gas Pressure Washer

The oil in my gc160 Honda pressure washer is getting water in it some how. Could it be something with the water pump gasket or what? And I can get it started but can't keep it running un less I keep spraying starter fluid in the carbar. Please help ?


... Karcher 2500 PSI Pressure Washer

Replaceing a water pump in a 2003 frieghtliner with a 3126 cat. have water pump loose from engine but will not come completely off. Does the oil cooler or the front accessory bracket need to be removed to get pump off?


... Caterpillar CAT Pump Pressure Washer Pump Oil

I wired my Bosch Dishwasher wrong and did a quick wash with it. Later on it stopped working and I figured out I had wired it wrong. I then disconnected it and rewired it. It buzzes for a bit then swishes some water around inside then buzzes again. When I open the door after it says clean it has murky water in the bottom like it was mixed with soap but never emptied. What did I do?


I hope this is not a quiz. Can you please clarify what component did you wire incorrectly inside the dishwasher? Did the dishwasher have a fault that you were trying to rectify.\015\012\015\012it will also help if you provide the full mod ... Dishwashers

Wont put out much pressure and burner wont work, and there is grey water coming out of the pump on the top. like it has oiland water mixed together.this is a northstar 240 electric steamer


... Northstar Electric Wet Steam & Hot Water Pressure Washer 2000 Psi, 1.5 Gpm, 120 Volt

Water flows from pump head continously and the last time I used it oil was all over pump.is this normal ? The washer is northstar,gas driven and is not to old. the water comes from two openings in the bottom of the brass head plate.


... Pressure Washers

Siphon hose sprays water out rather than si phoning chemical into the water mix


... Pressure Washers

Oil and water comming out of oil filler stem


You have a seal on the pump between the pump and the water pump thats leaking you have oil and water mixing . I owen three mechines and i don't understand what you mean when you say the oil filler stem. I also rebuild power washers and pumps. If you ... Comet BXD2527 Pressure Washer Pump

The cleaning liquid has never mixed with the water to pressure water. Do you think the line is clogged and if so, how do I take the unit a part to clear the line?


... Karcher PSI Electric Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1218 seconds