Having problems with your Candy 24 in. CD622 Free-standing Dishwasher ?

Candy a8001 dishwasher

\015 My dishwasher fills to begin its cycle, but seems to be filling too much and water starts to leak from the door. The only way we can empty it is to reset it and put in onto the rapid cycle which begins by emptying water. There are no blockages as the water is discharging correctly on the Rapid mode after reset........Please someone help me, my hands are getting soft washing dishes.\015

Answers :

It sound that the problem is cause the water level switch. \015\012The switch level is usually a diaphragm device with a small clear tube attached between the switch and the bottom of the washer's outer tub. I am not familiar with this specific machine, but if you will open the rear panel you will find it easily. Clear tube first from any obstruction, In case it doesn't help, disconnect the wires from the unit (you should disconnect first machine's power cable !!!!!) and measure with a multi-meter on its tugs for continuity and disconnection while you are inhale and blow to its tube.\015\012In case it doesn't react, you should replace it.\015\012Good luck !
Repair Help & Product Troubleshooting for Candy 24 in. CD622 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

CANDY A8001 DISHWASHER


... Candy A8001 Dishwasher

Candy a8001 dishwasher


It sound that the problem is cause the water level switch. \015\012The switch level is usually a diaphragm device with a small clear tube attached between the switch and the bottom of the washer's outer tub. I am not familiar with this specific machi ... Candy 24 in. CD622 Free-standing Dishwasher

How do I get to the thermostat for a candy a8001 dishwasher to replace it?


The thermostat is located uder the bottom panel, on the lower side of the dishwasher.See a general diagram here: ... Dishwashers

The r button is flashing - Candy A8001 Dishwasher


... Candy A8001 Dishwasher

We have a Candy dishwasher A8001 but don't work in any programme at all. Power light is on but no programme seem to be working, what problem can be ? pls advise, thanks.


... Candy A8001 Dishwasher

Candy a8001 dishwasher keeps tripping trip switch


... Candy A8001 Dishwasher

How to remove the front door on a candy A8001 dishwasher


... Candy A8001 Dishwasher

I have a Candy CDW254 E/1 or CDW 254 S/1 (not sure as this is the dishwasher in the house we are renting) I have taken the model from the Candy instruction leaflet. Our problem is the dishwasher cannot complete its cycles. If you are not able to help, could you please advise who is the best person in the Nelson area to contact for help with this dishwasher please? Thanking you Karen


... Dishwashers

Candy DFI 45 dishwasher not heating up - Candy Dishwashers


... Candy Dishwashers

Candy dishwasher displays error code 11 - Candy Dishwashers


... Candy Dishwashers

Candy CDI1012 Integrated dishwasher. When I turn on the dishwasher and start it - for some reason it can not go the whole way through the cycle. When I open the door the - programme light is flashing and water is still in the bottom of the dishwasher - ie mid cycle. The water will only drain if I put it into another program to drain away - but as the dishwasher was mid cycle - the dishes are not clean


Hello mm1973,It could be because of bad door latch switches / blown thermal fuse / blown or oversensitive control board. In all these scenarios, a dismantling of the machine is required. If you have no prior experience, I'd recommend get ... Dishwashers

Candy a8001 beeping and overflowing with water


... Candy A8001 Dishwasher

Candy csd-68-80 all four lights on front panel lit, started flashing within few seconds of switching dishwasher on, no previous problems,dishwasher not overfilled, checked manual which said too much inlet water unsure what this means or how to check it. do all usual cleaning,salt,arms etc. had dishwasher about 14 months and use it every day never had any problem before


... Candy Dishwashers

Candy dishwasher won't start.


... Dishwashers

Candy CDI1012 start button will not hold down, so I can't start the dishwasher. (feels like no spring in the button).


... Dishwashers

HOW TO PUT SOAP IN THE DISHWASHER? - Candy 24 in. CD623 Free-standing Dishwasher


... Candy 24 in. CD623 Free-standing Dishwasher

I have some problems with my Candy dishwasher CSF 4575 EX. The pre-wash light and drying ligh brighten together and also have beep sound. I traied to solve this problem with pressing the Start/Reset button more than tree seconds but still the dishwasher won't restart or change the problem. What you suggest to do ? Thanks a lot !


... Dishwashers

My dishwasher is leaking badly - Candy 24 in. CD950 Free-standing Dishwasher


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012kgh ... Candy 24 in. CD950 Free-standing Dishwasher

Hi my Candy dishwasher model CDI 1012/2 is filling with water then after a few minutes if bleeps and the error code meaning according to the manual is "Longer inlet time. possible cause Faucets is not open" The tap is fully open and the dishwasher is now full of dirty water. Could you please suggest an alternative cause?


... Candy Dishwashers

My dishwasher wont wash - Candy DFI Plan Built-In Dishwasher


I recommend inspecting the following areas.1. No power to the dishwasher\015\012\011\011\011Make sure there's power getting to the dishwasher. Check for a \015\012\011\011\011tripped circuit breaker or a blown fuse. Check the ... Candy DFI Plan Built-In Dishwasher

Helloo! Dishwasher candy futura cdf 312A not work. On button 50 and 1/2 at the same time flashes controls light. I hear drain pump how to boot. When I turn dishwasher off-on defect not disappears. Please help me.. Thanks


... Dishwashers

Dishwasher error code E4 - Candy Dishwashers


Hi\015\012Because the timer controls many operations, a faulty timer can cause many problems. The timer is a complex component, so you shouldn't attempt a do-it-yourself repair. Test the timer with a VOM set to the RX1 scale. To gain acce ... Candy Dishwashers

Error Code E4 on my Candy CDI 45 Dishwasher - Dishwashers


Get you get it fixed? I have the same error ... Dishwashers

I have a Candy CS 455M slimline dishwasher which is 3 years old. The program button has stopped moving round I put dishwasher on and went to work and it was still washing the dishes when I got home from work 8 hours later. I thought it might have stuck and been a one off but no it happens every time is it the timer? is a new timer easy to fit?


... Candy 17 in. CS455 Built-in Dishwasher

There seems to be an electrical fault in my dishwasher. It is a slimline candy dishwasher purchased only three years ago. Everytime I try to start it all the electricity goes in the downstairs of my house. I changed the fuse twice and it worked for a while only for the same thing to happen again. I also tried to turn off all other electical equipment downstairs to see if this made a difference, but it still didn't work. Would you have any idea what is wrong with it? Thanks. S. Byrne


Hello sue by rne.. \015\012If your fuse blows when you are running the dishwasher alone, I would agree that your dishwasher may have a problem however becuse you stated that it works sometimes..I am more apt to believe that when you run the di ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1178 seconds