Having problems with your Candy DFI Plan Built-In Dishwasher ?

Dishwasher is completing washing cycle but at start o fcycle and tehn intermittently during it is making a mechanical whirring / nocie as if soemhting caught in motor / blades. Nothing to be seen on inspection.


Answers :

Repair Help & Product Troubleshooting for Candy DFI Plan Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher is completing washing cycle but at start o fcycle and tehn intermittently during it is making a mechanical whirring / nocie as if soemhting caught in motor / blades. Nothing to be seen on inspection.


... Candy DFI Plan Built-In Dishwasher

Grinding The situation: I have had my Whirlpool DU915PWPB1 for 2 1/2 years, it isn't the greatest dishwasher but does the job good enough. Recently, the water will fill, the washing cycle will run but then when that part stops it goes into a whirring that seems like a motor is going but nothing is moving. I have removed the Filter Modual in an attempt to find out what the grinding would be. There doesn't seem to have anything in the way or under the filter. I have ascertained that the grin


Noise probably not from there when reassembled the plate will not be direct contact with screen noise is probably from wash motor itself..suggest checking owners manual for warranty info ... Dishwashers

European Bosch SKT 5002/02. Was disconnected by our plumber to install new cabinets. Not used during winter, as it is never used in winters. Fills with water, makes no noises but does nothing else. Have been told on-line to try to turn the motor (blades, I suppose) but it looks like the whole unit is behind galvanized panels and I don't want to do what I shouldn't......


Hi.Re:"Have been told on-line to try to turn the motor (blades, I suppose)" Someone has probably told you to energize the impeller pump motor directly by jumping its contacts to find out if the motor is working. That is a deli ... Bosch 22 in. SKT5108 Free-standing Dishwasher

Won't start After two months of no use my dishwasher won't work. I can hear motor running but no water. We tried cleaning by filling with water (priming motor) but nothing happens. Now the dishwasher if full with water, motor makes noise but nothing is happening. Help!!


It sounds like you have a food blockage or some blockage between where the water fills up and where it goes into the pump you need to take out the water wand (the rotating thing with water coming out) only the bottom one. You need to unscrew the wate ... Hotpoint 24 in. HDA1000Z Built-in Dishwasher

Whirlpool chopper blade completely inaccessible


Hi,Sorry you are having trouble, I put together some instruction for this issue. Take a look and let me know what you think. I would be happy to clarify anything that is confusing. ... Dishwashers

I have an avanti dw 18 dishwasher . the problem i am having is the when i turn the on button on the motor goes on however no water fills up. The motor is only humming. But; when i press down the float from inside the machine the water fills up and the machine starts to work. after the water drains again the motor continues to run and hum and the dial does not move. when i manually move the dial nothing seems to change . the motor continues to only hum. Even when the dial is in the stop position


... Avanti Dishwashers

GE built in dishwasher model GSD 3404 j01WW motor stuck - hums - can not be freed by moving blade - blade will not move more than 10 degrees


... Dishwashers

My kenmore/whirlpool dishwasher makes a noise, sort of a grinding noise, throughout most of the cycle. I have removed the pump and motor thinking that their might be something in the pump, but there is nothing there. My guess is that the motor is making the noise, but I do not know how to tell other than by replacing the motor and seeing if the noise goes away.


Hi Thank You for usingFixYa. To start with check the pump and try to clean it out, then check drainhose for any obstruction. Also check for a bad bearing on the spray arm. Ifstill the is ... Dishwashers

Bosch shu8806 Hello, I aquired a shu8806 recently and it doesn't work. It has power and water. I push wash cycle, indicator light comes on, shut door and nothing happens.  So the door switch seemed like a good place to start. Since I am an electrician I thought I would give it a shot. When plugged in, the wire from the motor is 120V but when jumpered to the neutral(common on the door switch), motor doesn't operate. Although, I have heard the motor turn over momentarialy when trying to run unit e


The pump may be clogged, or the motor start capacitor may be bad or some units have a fill switch wired inline with the motor so it won't start unless the unit is full ... Bosch 23 in. SHU 8805 Built-in Dishwasher

Ge model # gsc3200j01ww dishwasher. when the door latch is closed, nothing happens. motor does not start. if the timer is advanced to the next part of the cycle, water will spray into unit until float valve is triggered. water will not pump out, motor does not start. bailed out water, checked for stuck float valve-ok. removed drain screens and filters, cleaned. no motor, drain, or start. what parts should i check? always rinsed dishes before putting in washer. unit is portable or undercounter


... GE 25 in. GSC3200J Built-in Dishwasher

FDB750RCC1 When I start the DW, the motor hums loud then soft then loud then soft...if I advance the dial some sections of the cycle nothing will be running and others the motor is on, but no water is getting into the unit. I just replaced the inlet valve and solenoid and that didn't change anything. I can see water in the recirculating pipe running up the unit, but it will just try to make it up and fall back down. Not sure how to proceed...my thoughts would lead me to the main motor, but


Can you hear the water solenoid click when it calls for water? If so, check that the water source valve is on and water comes out of the valve. Check the entry hose for kinks. Remove everything under the lower arm down to the deck keeping track ... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

I have a Kenmore Dishwasher Model #665.168790000 and the water fills just fine and empties fine when cancelling cycle but when pressing any wash cycle the pump/motor just makes a loud humming noise and does nothing. I took apoart the lower assemblies to clean everything out but the problem hasn't gone away. Do I need to replace the motor or the whole motor assembly (also contains impeller kit)??? Also, I don't think I need to replace the whole sump & motor assembly do I???


... Kenmore Dishwashers

My GE trash compactor just quit working. A little over 1 year old. I opened it and found inside the motor frame a magnetic contact that is burned up. Nothing else is wrong. This part shouldn't cost more than $10 . I can't find it anywhere. Do I have to buy a new motor for $180 to replace a perfect motor with a burned up $10 contact?


Parts sadly, aren't as inexpensive as they used to be. Hopefully, you can get away with the $25 part.\015\012\015\012http://www.repair ... GE Dishwashers

Can hear motor running but nothing happens in dishwasher


Hi, you need to test voltage to the water inlet valve. If you are getting voltage (120V) replace the valve. If you are not getting voltage check the water level switch located in the front corner of the tub.\015\012If I can assist you any furt ... Dishwashers

Motor running, nothing happening!


... Bosch 24 in. SHU5305UC Built-in Dishwasher

Miele g892 scu plus, about 5 years old. when on, all it does is run some motor (humming sound) and flash salt or intake/drain. No program lights on. Sometimes can be reset so rinse light comes on and nothing blinks, but humming motor still runs and salt eventually blinks. I removed toekick panel; there is water in pan. I disconnect drain hose, only a little water came out. Any ideas?


... Miele G892SC SS Dishwasher

I have a mod KDSU01DJ that will not drain. I've had it all apart, there are no clogs, nothing stuck. I bench tested the motor and the pump, both run ok. It seems like the pump isn't pushing hard enough. Should the motor be running with the pump during the drain cycle. I"m stumped. Thanks.


Yes the drain pump motor must be running during the drain cycle.This manual will help trace your problem.4317196.pdf ... KitchenAid KUDS01DJ - Multiple Color Dishwasher

I have a hotpoint dishwasher model number HDA 460-03 AD and is dialed controlled when I turn the dial nothing turns on. no water no sound no nothing just a click. What could be wrong with this unit?rnCould it be the motor and how can I check that?


... Hotpoint Dishwashers

Go to start dishwasher and nothing happens...no noise, just the lights lite up on the buttons depressed. No motor sounds, no water, nothing


Connect a voltmeter to the water solenoid valve, and press the start button. If you have 120 volts to the valve, but it does not pass water into the machine, then replace the valve.\015\012\015\012Turn off the power, connect an ohm meter ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Dishwasher fills ups, relay clicks but drive motor just hums and nothing happens. Could the drive motor be blocked with debris?


I have the same problem! its really pissing me off, tried overdosing with finish limescale remover and a hot kettle full of water, i use it rarely and previously it happend just hot water cleared the problem but now im having no luck, have you got an ... Maytag Dishwashers

I have a Generac pressure washer, model #01450-0, with a Honda 5hp motor. The motor runs fine, but the pressure hose pulsates as if the pump is intermittently making pressure, and the pressure out of the sprayer is about half of what it should be. A friend suggested replacing the seals in the unloader. I bought an unloader kit, replaced everything and it still runs the same. It will build a small amount of pressure, spray for a few seconds, then the pressure dropps to almost nothing. Any help ap


Take a small diameter wire and poke thru the discharge hole of the spray head to clean out.\015\012Second time in 6 months that I had the same problem. The problem is alway in the spray head. ... Pressure Washers

Maytag MDBTT79AWW dishwasher fills and nothing else. Once filled you hear a click, followed by a humming sound for 3-5 seconds, then silence. This will happen two or three more times, and then unit will shut off. Motor doesn't start. Repairman says he thinks control board is bad, but he sounds like he is guessing. I performed a field service test , which indicated a fault in the high current motor circuit. Unit is seven years old. Don't know whether to attempt repair, or replace.


That sounds like the motor trying to start but being jammed it is shutting off via an internal breaker. Check for something in the bootom of dishwasher that might have gotten down there that could do this. You might have to take the sprayer off and s ... Dishwashers

I have a Karcher 2.94 pressure washer but when I turn it on nothing happens,I have tryed checking the hose for any blockedge which there isn't. When I used to turn it on before it used to give quick buss,which I'm guessing is the motor,but now there is nothing. Please can you help in any way? Thanks Colin.


My karcher k 2.94 makes a loud screeching noise when trigger gun is pulled and released.... any idea what this may be ??? ... Karcher Pressure Washers

Motor problem?? The dishwasher takes in water then the water just sits in the bottom of the unit until the end of the cycle, there is no water going through the jets so the dishes are not getting cleaned. You can hear the motor but nothing is actually happening until the end of the cycle when it just pumps the water back out again


Have you checked the pump / motor belt? ... Tecnik TDW2677 Built-in Dishwasher

Maytag Dishwasher Model MDB4100AWQ When I start the Light Wash Cycle: Washer fills with water, heater comes on (I checked it with a volt meter--120 volts), timer runs, motor never runs, before the timer gets to "rinse" the heating delay light on the door comes on and the timer stops. The heater is still on (120volts) nothing further happens it just boils away on the water in the washer. Note: If I manually forward the timer to "rinse" the motor will kick in and run but does not pump out w


Most common d/w power is 120 volts, check for 120 volts with a  ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0861 seconds