Having problems with your Candy DFI Plan Built-In Dishwasher ?

Dishwasher door Trying to swap dishwasher for new one - can't remove integrated door


Answers :

Repair Help & Product Troubleshooting for Candy DFI Plan Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher door Trying to swap dishwasher for new one - can't remove integrated door


... Candy DFI Plan Built-In Dishwasher

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

I am trying to replace the GUIDE RAIL BRACKET ASM on my GE dishwasher (model no. GSM1800JWW). How do I either: (a) remove the old brackets, and then install the new ones; or (b) remove the rollers from my new brackets, so that I could slip these rollers onto the old brackets still in the dishwasher, saving the trouble of removing the old brackets in the first place? Either solution would be acceptable, but right now I can't figure out how to do either one without breaking something. Thank you v


Be ready for both . because if they break you can still replace it. but (a) is to me the better choice. let me know how you made out and send me a 4 thumbs post if it works out ... Dishwashers

Unable to fit new door panel to front of dishwasher. Have removed old one with great difficulty and now cannot figure out how to get new one on. Have placed the fittings from old door onto new one in exactly the same place but am baffled as to how it attaches. HELP!


Im not sure what new panel you are trying. But if you can still get the old one back on, you can get different panels, color, and designs from applianceart.com. they also custom cut stainless panels to fit or they have a stainless foil that can cov ... Whirlpool GU2400XTP Built-in Dishwasher

Hello! I just ordered a new facia panel for our Bosch dishwasher SHU9955UC/U12. It seems like it should be fairly easy to replace it (meaning, myself...). Is it really just a question of unscrewing the screws on the inside of the door, removing the old panel and then replacing the new one? Are there any especially delicate inside mechanisms/parts That should be protected? Many thanks.


... Bosch SHU9955UC Built-in Dishwasher

Smeg DI612CA integrated door springs open, catch won't hold when trying to close door. Have removed before and reset catch. Same problem now seen again. Likely that I need new catch unit, or could problem be electronic?


... Dishwashers

I cannot get my dishwasher to cancel the old cycle and start a new one. I opened the door when the last cycle was drying, and let the dishes air dry. I tried to press the START button until CL appeared, but the timer will not progress beyond 0.01 and I cannot start a new cycle. Help!


... Bosch SHE6AP05UC 24 in Builtin Dishwasher

How to remove integrated door on hotpoint ls12 dishwasher


... Dishwashers

Dishwasher does not clean tea stains from teacups- we have tried a variety of soaps and have used sani-clean. Machine is only one month old- new fully integrated model.


\015\012Method #1\015\012\015\012Wet a cloth then rub the inside of the mug with baking soda. If the stains are stubborn, soak overnight in hot water and baking soda.\015\012Meth ... Samsung Dishwashers

I just installed a new Kitchenaid dishwasher (Model KUDE60FVSS3). After filling with soap, closing the door and starting the machine, it fills with water, waits a couple of minutes and then I can hear low humming noices coming from down below. After opening the door it appears that neither spray arm has turned as if to wash. This dishwasher was purchased new a few years ago and kept in storage as our basement was being finished. This dishwasher has never completed one cycle. Any and all inf


If you have a garbage disposal, there is a plug in the dishwasher that has to be removed for the washer to drain. ... KitchenAid KUDE60FVSS 24 in Builtin Dishwasher

Integrated door removal on hotpoint ls12 dishwasher


... Hotpoint Dishwashers

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Door leak The dishwasher is 2 and half year old and is randomly leaking for at least one year or even more. The leak originally occurred at both lower ends of the door, close to the hinges. The leak was about one liter and the door panel sound insulation soaked with water. After door panel was removed, the leak location was identified at both ends of the lower door gasket. The outside part of the U-shaped gasket was filled with water, and eventually water was spilled on the floor. The leak can g


I had the same problem. On the right side of the tank in Bosch dishwashers there is a steam port. If you place a large object in the right hand edge of the tray, a pressure build up causes the leak. Put large stuff on the left and you should be good ... Bosch 24 in. SHU5305UC Built-in Dishwasher

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I need to remove the furniture door off my integrated dishwasher


I have the same problem.I need to take off the door from the integrated dishwasher.I can see a possible screw on the either side of the door but difficult to visualise this to find out what kind of screw it is.\015\012Can someone advise me reg ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Flashing lights My GE model # GHDA455L00CS Quiet Power a dishwasher's lights are flashing when I start it, will not reset or in-take water. I've tried unplugging it and restarting. Nothing. Tried removing door door screws and press down door latch. Still nothing. HELP!!!!!!!


... Dishwashers

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Hi Just bought and installed a Bush wkp12-9348 integrated dishwasher. There seems to be a problem with the door. When I open the door the spring seems very tight and tries to close. I am unable to unload the dishwasher as the door will not remain down. Can anyone help or advise what I can do? Thanks


... Dishwashers

Ariston LS620A When running my dishwasher the dishwasher tablet is not disolving and entering the system. The dispenser is open but the tablet is stuck there??? I have cleaned the removable parts from the bottom of the system and put a new tablet in but the same problem happens again. This time when removing and cleaning the parts at the bottom there is water present and it hasn't drained is that normal? Or are there other parts there I have to remove....I have tried but nothing seems to budg


Hey, I experienced the same problem and I realized it happens when you block the water from the dispenser with a dish. Make sure that it is never blocked and the dishwasher is going to work fine ... Ariston Technologies LL64WNA Built-in Dishwasher

Flashing lights My GE model # GHDA455L00CS Quiet Power a dishwasher's lights are flashing when I start it, will not reset or in-take water. I've tried unplugging it and restarting. Nothing. Tried removing door door screws and press down door latch. Still nothing. HELP!!!!!!! IT WILL NOT PROGRAM. IT HAS A FLASHING LIGHT. WE HAVE BOUGHT EVERYTHING BUT STILL DOES THE SAME THING


It mite be the circut board problem..just  re-soldered a few of the pins in it and things will be back in working order. ... GE Profile PDW8400J Built-in Dishwasher

Hello, My husband bumped into our Bosch dishwasher door when it was open. It won't close now, one side is about an inch higher than the other. Also the inside of the door (not the hinge) looks bent. What can we do? Can a repairman fix the door or do we need to get a new one?


THE DOOR NEEDS TO BE RESET IN ITS POSITION.THAT A REPAIR MAN CAN DO BEST YOU GET THE AXPERT IN TO ASSIST YOU.\015\012\015\012GOODLUCK.\015\012\015\012MOHAMED ... Bosch Dishwashers

Hi, we are trying to install our new Bosch dishwasher model: SMU68M05AU. I am surprised to see packing foam and flimsy edging across the top edge that meets up to the stainless steel door edge when its closed. I can not find detailed installation instructions. Is there not a strip that goes across the top to meet the door as the top looks very ugly? The dishwasher door protrudes from the under bench cupboard space so the top part is in view and exposed.


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Bosch Dishwashers

I'm trying to remove the disposal cover in the dishwasher (GE GSD3207P00WW) in order to clean it, but unlike previous models I've dealt with, this one has a filter thing that looks like a tilted plate, just under the main washer, and that has apparently a drainage tube (or some such) that goes down through the disposal cover, so I'm unable to remove it. How does one take that apart?


... Maytag Dishwasher

Hey Everyone! Ok try this one! I have been working on a KUDS25 Kitchenaid Dishwasher. It was leaking like a siv from the bottom. I replaced both top and bottom plastic bearings and also tightend all the screws at the bottom. Leak Gone, I thought. It now has small leaks down both sides. I have since been told by the owner that he took the door apart himself. I pulled out the dishwasher from the cabinet and ran it. I could see the leaks at the top on both sides of the door latch. I cou


Hello davidgalb. You can install a new gasket to seal the door again. That old seal is not flexible any more. That said, for my time and money I recommend a replacement dishwasher, this one has definitely seen better days. Joe ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.3100 seconds