Having problems with your Coleman Powermate DuraBuilt 1400 PSI Pressure Washer ?

WATER LEAKS FROM INSIDE THE 1400 PRESSURE WASHER

\015 READY TO GO AND THE FIRST TIME YOU GO TO USE THE 1400 PRESSURE WASHER WATER JUST FLOWS FROM INSIDE THE HANDLE?\015

Answers :

Replacing Compasster, where on the terminal block does the black and white wires go?
Repair Help & Product Troubleshooting for Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

WATER LEAKS FROM INSIDE THE 1400 PRESSURE WASHER


Replacing Compasster, where on the terminal block does the black and white wires go? ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Turn water on then actuate wand trigger. Pressure washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic oulet tube is leaking causing low pressure leak out of bottom when trigger is actuated and causes pressure switch to cycle when the trigger is released. Any Help? This pressure washer is approx 18 months old!


You gave a very close solution yourself for the problem. But other leakages can cause such symtoms.Forexample a leaking head or a leaking chemical inlet. These can be caused because the spill valve (pressure control valve) is stuck. When this valve s ... Karcher PSI Electric Pressure Washer

Water leaking from inside my 3.500 - Karcher Pressure Washers


... Karcher Pressure Washers

Water is leaking from under the chrome piece inside my Karcher 3.68m pressure washer. Hose intake and outlet look good. Any sugeestions.


Plastic Pump Manifold is cracked.\015\012\015\012Can be replace at a local Karcher Service Center,\015\012or if you are mechanically handy.\015\012Replacement Manifold Complete, is available from www.karcher.com.\015\012\015\012If it is ... Karcher K3.68MR Factory Refurbished 1,800 PSI 1.5 GPM Electric Pressure Washer

Hi ..I have an Excell gas pressure washer model no. Exwgv2121-3 with Faip 2100 psi 2 gpm vertical shaft pump..the problem is that there is water leaking from every weep hole at the bottom of the pump when running. Oddly enough,the pump still puts out significant pressure but less than it should due to the leaking water. What is the most likely cause of this?..is it the high pressure water seal(s)? If so,how do I repair it?


... Pressure Washers

Were water inlet hose connects to housing on washers left side, water is leaking seems to be a washer or valve that mounts on the inside of washer might be missing but have not found any such object inside the washer


Hi, There is some lime build up inside the inlet. Remove the hose and push a wire or a small screw driver into the hole and reem it out. That should yake care of the water leaking.\015\012Please let me know if this helps you.\015\012 ... Dishwashers

I HAVE A MIELE G646 SC DISH WASHER AND IT KEEPS LEAKING WATER INTO THE LOWER TRAY AND CUTTING OUT BECAUSE THE FLOOD SYSTEM KICKS IN.I HAVE THE MACHINE IN THE GARAGE WORKING UP ON TWO WORK MATE WITH THE UNDER TRAY OFF FOR THE FIRST FEW CYCLES THERE WAS NO LEAKING THEN WE FOUND IT LEAKING DOWN THE FILL PIPE.THE WATER IS LEAKING FROM AROUND THE AREA THE FILL PIPE FITS TO THE WATER SOFTNER BUT NOT ALL THE TIME.AN ENGINEER FROM MIELE SUGESTED IT COULD BE THE VENT INSIDE THE SIDE OF THE MACHINE BUT EV


Have you made sure the water sofener filler neck locknut is tight to the bottom of the dishwasher?i have had experience with one machine where spilled salt was not rinsed away after the softener was filled and this corroded a very small pin *** ... Miele 24 in. G646SC Plus Free-Standing Dishwasher

Smeg DWF612WH dishwasher has developed a leak. Water comes out of the rectangular hole on the side of the water softner used to mount what looks like a level or pressure switch. A few seconds after the fill valve opens water leaks out, not a lot just a small trickle. After the washer has filled and goes ito its cycle, it does not leak again. Over the past weeks the problem has got progressively worse.


... Smeg 24 in. DWF612WH Free-standing Dishwasher

Karcher K 3.65 Jubilee Pressure Washer - water pulses,low pressure and leaks under machine


... Karcher Pressure Washers

I have a Northstar pressure washer powered by a honda GC160 engine. The last time i used it, water leaks from the bottom of the unit, whether it is running or not. When running, the pressure is fine. I have felt underneath and it appears that the water is coming from the second opening from the rear. Is there a pressure relief valve there. I have a manual but cannot find any descriptors for underneath the motor.


This is a piston seal issue. You can get a kit to rebuild the pump. ... Comet AXD 3020 G Pressure Washer Pump

I have a karcher 4.6 pressure washer that developed the usual fault.... drop in pressure and leaking from the cylinder head. I have replaced the cylinder head and the attached control chamber. The pressure is now good again and the leak is fixed. Unfortunately now when the trigger on the lance is released the the machine does not switch off automatically. I have bled the machine by letting water run through it


... Karcher Pressure Washers

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.


A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

My pressure washer leaks water out the back form some kind of valve that has a hole in it. the pressure washer will flow pressure but not as much as it did.


... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Pressure washer karcher 3.86 leaking inside


... Pressure Washers

Hozelock pressure washer is leaking water - Pressure Washers


... Pressure Washers

Pressure washer leaking water - Craftsman Pressure Washers


... Craftsman Pressure Washers

Karcher K6.50 Water coming from body of washer resulting in loss of pressure. Leak slows down when washer is used - ie water is coming out of jet


... Pressure Washers

I have a Karcher G2600 OR Pressure Washer, 2600 psi, 2.5 gpm. PN 1.194 506 0. gas engine works fine and water flows fine but pump is not adding pressure to stream. Checked and cleaned inlet water filter.


... Pressure Washers

Two problems please: craftsman 2150psi briggs and stratton engine washer, will not start when hot. and secondly, i was washing with regular pressure, then noticed a pressure drop at the nozzle, then the unit shut down. no water leaks at the manifold. water supply was strong. any ideas?


Nozzle dirty, clean out with small diameter wire. ... Pressure Washers

My Powercraft 9686 pressure washer has always been stored in my garden shed. It is 4 years old and when I used it last September the power washer had lost considerable pressure, as it was leaking water. Can I fix it for a reasonable price? Thank You. John O D


Put some silicon spray in inlet/outlet then reattach hoses then run it will proform after a while do this everytime you store it pryer to sroring away........... ... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer

Pressure washer leaking water from the pump - Pressure Washers


FIND THE LEAK THEN IF IT'S THE HEAD BOLTS TRY TIGHTENING THE HEAD BOLTS USING SAME AMOUNT OF PRESSURE ON EACH BOLT OR IT COULD BE JUST A LOSE FITTING OR A BAD HOSE GASKET \012. Jay the pool pump whisperer FLORIDA ... Pressure Washers

Disconnected dishwasher and moved out in order to tile the kitchen floor. Ten days later reconnected dishwasher. Turned on water supply to leak check -- no water is getting into the washer. - Ran hot water from sink side to see if that would help, no such luck - Disconnected water line and water is in the line up to the connection point at dishwasher. Looked inside valve of dishwasher for obstruction - no such luck - Disconnected both ends of water line and blew in line to check for obst


... Bosch Evolution 500 SHE45M05UC Stainless Steel Dishwasher

Water is leaking from the handle of the gun on my Karcher pressure washer


... Karcher Pressure Washers

Durabuilt pressure washer 1600psi. Water leaking


Sounds like a faulty seal around the gun. Repair might be few bucks if you take it in. But the price of the part is probably under a buck. Depends if you want to rip apart it yourself. ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1600 seconds