Having problems with your Coleman Powermate DuraBuilt 1400 PSI Pressure Washer ?

Troy Bult 01902 Leaking gas from air filter area

\015 I have a Troy Built 01902 2350psi 2.0gpm pressure washer. I have never used it but did let someone borrow it a couple of years back. It was brand new and since being returned has not been used and has been sitting in the garage. I decided to fire it up and actually use it and take advantage of it. Well when I tried to fill the gas tank I noticed that the gas just spills right out of where the air filter goes. No matter what position the choke is in it just leaks out until empty. I read somewhere it could be the float but I would like an expert opinion. If so I have not seen that part for purchase unless one has to disassemble the whole thing to get to it. If that is the case then I will drop it off for service but if this is something that I could fix it would be greatly appreciated. I know this is a consumer model but It should be fine for my needs and I do not want nor need a new unit if this can be restored to functional status.\015

Answers :

Repair Help & Product Troubleshooting for Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Troy Bult 01902 Leaking gas from air filter area


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a troy built pressure washer leaking gas from the air filter i looked around for advice and hurd bang against the carb and it will realease the float valve i did it and it worked but should i clean out the fuel in the filter area or the filter will it harm it as it is or should it be okay? the filter was soaked in gas dry now and when it happened the gas flowed from the air intake (behind the filter) if i need to clean out in there how do it do it and if i need a new filter


Definetly replace the paper filter and yes Lowes will carry them.if it does not leak now, I would leave it alone or you will be installing a nine dollar kit.The briggs kit # is 294260 is you choose to do it anyway ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Troy Bilt Pressure Washer Model 01902 Leaking Gas from Air Filter


Try banging lightly on carberator with block of wood or something to free up float and valve!!!! ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I borrowed my nieghbors power washer. It worked the first day all day. In the morning i filled the gas with a fuel stabiler, and 30 oil. I may have over filled it. Upon turning it on the oil started leaking from the air filetr compartment. It starts, but then smokes starts to fume and all the oil leaks. Did I break it or is it a easy fix. I cleaned the filter housing. Also the filter was soaked with oil. should i get a new filter and install it or what is the solution. need help.


You will need to get a new filter, and drain some of the oil out of the machine. If you over fill these this will happen. 90% of the time nothing is broken. ... Karcher 2500 PSI Pressure Washer

Husqvarna 020490 gas leak behind air filter


... Pressure Washers

Gas leakes from air filter canister - Campbell Hausfeld PW2102 Gas Pressure Washer


... Campbell Hausfeld PW2102 Gas Pressure Washer

Gas is leaking out of the air filter - Briggs & Stratton Gas Pressure Washer 20244


Replace the needle and seat in the carb ... Briggs & Stratton Gas Pressure Washer 20244

Briggs and stratton 125K02-0131-E1 is leaking gas from around the air filter. I have looked at the hoses and they seem to be fine. I seen where to bang on the carborator to undo the foat, have tried that, still leaking and will not fire


Float is either faulty or sticking very bad, manualy take it out and clean it make sure it moves freely ... Pressure Washers

My homelite 2200 pressure washer leaks fuel outta the air filter area. There's a brass, looks like a bulb, fittting underneath it with holes for 2 brass screws, only one screw is in there and the other empty screwhole is where the fuel pissin outta. Just bought earlier today, when I ran it, I only got a few minutes usage. Should there be a screw there perhaps? Is it missing?


... Homelite Pressure Washers

Gas leak behind air filter - Briggs & Stratton Pressure Washers


It could be a line going to the fuel rail or to the injectors ... Briggs & Stratton Pressure Washers

Troy built 2350 psi 2.0 gpm. pressure washer. starts onne then dies. will not start again. has briggs and straton motor. has been sitting up for the winter. have changed spark pulg. checked air filter that is clean, has oil and gas.


... Pressure Washers

Karcher 2400R I have not used my pressure washer for 6 months. It was left full of gas in the garage. I tried to start it but it would not fire up so I change the gas, oil, and spark plug, took apart the carburator and cleaned it out with carb cleaner. I went ahead and put everything together, pull the cord and wanted to start. While trying to start it after I sprayed starting fluid in the air cleaner I noticed that gas was coming back from the crankcase breather hose into the air filter choking


You have a poor signal to the spark plug usually caused by a rusty fly wheel found underneath the pullcord casing. clean it with releasing ajent such as wd 40. common when not in use for a while. ... Karcher 2500 PSI Pressure Washer

Gas leak briggs and stratton pressure washer 2400 psi


... Briggs & Stratton Pressure Washers

Troy Bilt power washer 020293- Oil in air filter


That is incorrect. if the oil has been over filled, it will saturate the filter element by way of the crankcase breather tube. it is the small plastic pipe that connects to the bottom of the filter housing. check the oil level. these machines take ve ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Have a troy built pressure washer and the gas is leaking out help


The float is stuck you can either take it apart and clean it or you might get by by just tapping lightly on the fuel bowl on the bottom of the carburator to unstick the float ... Pressure Washers

Have a troy built pressure washer and the gas is leaking out help


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Troy bilt pressure washer series 675, why does oil comes out of the air filter?


... Pressure Washers

Gas leaking out of carbuerator - Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487


... Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487

Throttle problems Homelite pressure washer model UT80709A. bought it 10 months ago with no problems and stored it for last 9 months. Before doing so, drained gas, oil. Brought out of storage a few days ago, filled with fresh gas, oil, cleaned air filter. Starts great first try but after about 30 seconds the throttle starts visibly revving the motor a litlle at first then gradually faster and faster until it seems to flood and die. Then you cant start for about an hour and its the same story. Hav


... Homelite Pressure Washers

My gas power washer will not start. I filled the gas, checked the oil, set the choke, made sure it was on, changed the spark plug, checked the air filter, and drained any water. When I pull the cord to start I don't even get a putter. Anything else I can try or do I need to take it to a service place.


Will it run if you pour a small amount of gas in the carb? If so, it's a fuel supply problem. Most likely a stuck closed float needle. ... Honda Maxus Pressure Washer MX5222

Wont start I have a North Star pressure washer that has been in storage for three years.It has the Honda motor GX 160 5.5 I put in new gas changed the oil, air filter,and spark plug.But it wont kick over. Im not sure how to work the levers upon starting it.Theres one for gas, choke,idle,and of course an on switch.Please help


Tip a cap full of fuel in top of the carb to start intitially, check for spark as common fault is on/off switch, If no spark, link the 2 wires on on/off switch together. ... Pressure Washers

I have a Briggs & Stratton Pro 3400 pressure washer that I got new last year and used for maybe 5 hours and it worked great. Have had it stored since then with stabilizer in the gas (I didn't run it dry) and now it won't run for more than a minute or two without dying. A dealer said it was probably bad gas and I now know that even with the stabilizer I should have run it dry last year before storing. Everything is like brand-new including plug and air filter so it must be the gas/carberator gunk


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

The washer will run about 2 min. then die. i have checked the oil, air filter and gas. it has good presure when running then it acts like its out of gas by stalling and dieing. Problems with Mi T M 13 Hp, Honda Ohv, Compressor, 3500 Psi 3.7 Gpm, Belt?


It is possible that the oil pressure switch is not functioning properly or you have a lighter oil in the machine than is recommended.Post a comment if you need more assistance. ... Honda Pressure Washers

My pressure washer leaks oil out the air filter. I have removed the filter and it still pours out. it only happens when i engage thw hose.


Hi and welcome to FixYa, I am Kelly. \015\012 [ First check and make sure someone did not over service the engine oil level. ] #1 Cause of oil blow by that happens out of the blue. \015\012\015\012This is happening ... Karcher 2500 PSI Pressure Washer

Hi. I have a Briggs & Stratton 2800PSI gas pressure washer. I can get it to start, but after about 5 min, then it quits. I have cleaned the carb, change oil, changed plug, new gas, cleaned/checked air filter. Nothing will keep it running. Wondering if it may be not enough water pressure, but would that cause it to stop like that? When it runs, it does a good job, but it stops just as you get going. Do you have any other suggestions? Thanks!


If it wont start, check for spark.how you do that,ok take the spark plug wire out put it close to the sparkplug(use some gloves or something to insulate your self from get electric shot from the spark) find some one who pull the start rope, if you do ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0938 seconds