Having problems with your Coleman Powermate DuraBuilt 1400 PSI Pressure Washer ?

Where is the pressure switch located on a simoniz 1600 electric power washer?


Answers :

There is a pressure switch to cut the motor once target pressure is reached. I.e. when the nozzle is closed. It's a black cheap plastic thing, right in front of the pump body. It has a white plastic lever to trip the switch. It was sticking intermittently on mine. the simoniz 1600 is quite a cheap peace of ****, needs fiddling around every time I use it
Repair Help & Product Troubleshooting for Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where is the pressure switch located on a simoniz 1600 electric power washer?


There is a pressure switch to cut the motor once target pressure is reached. I.e. when the nozzle is closed. It's a black cheap plastic thing, right in front of the pump body. It has a white plastic lever to trip the switch. It was sticking intermitt ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a Craftsman power washer model 580 752020. When I start it up, turn on the switch the electric motor runs fine until I either close the trigger to the spray nozzle or press the trigger for power spray. The electric motor just shuts down, if I take my finger off the pressure and let the water run with no presssure the motor runs fine. My question is this. Is the capasitator on the electric motor the probable cause and is there a way to check out the capasitator to see if it is malfuncti


I doubt that it has anything to do with the capacitor on the motor. i think you are having a problem with the actual Motor Drive circuitry. What is happening is when you close the switch, this tells the Motor to "Ramp Up" to pump the water out, what ... Craftsman Pressure Washers

Our craftsmen electric pressure washer stopped working while in use. We have power - red light on gfci and we tested the master switch - has power too. So what can be the problem? One post mentioned a jammed pump switch. What is that and where is it? We used it 2 weeks ago and it worked fine.


The pump switch they spoke of is an internal switch. It is activated by a valve so that when you let go of the trigger, the machine shuts off. This valve is stuck or the switch is bad. Usually the valve is the problem. I would go to Sears and get ... Pressure Washers

I was using my Karcher 350M pressure washer working fine but it just stopped having tripped the power boards circuit breaker. The breaker now trips each time I switch on the washer. There is no smell of burnt motor and the electric did not get wet when last in use. Appreciate any suggestions or tests that can be made. I have a decent multimeter. Thanks.


... Karcher 1750 Psi Elec Pressure Washer

Power washer - model jcb-pw20tss. TSS=total stop system. seems to be ''stuck'' on my model. Can you suggest method to free up and restore pressure which will allow me to switch on machine again. Mains electric =OK Fuse = OK Connected to water supply =OK


... Pressure Washers

I have a karcher K3.97m electric pressure washer. The unit constantly runs and never shutoffs. I after flipping the power switch. What could be worng?


Someone has hard wired the switch to always run because the switch was apparently bad at one time and in order for it to work they just wired it up straight. Remember to rate my solution Thanks in advance ... Karcher Pressure Washers

Karcher K2.26M electric power washer leaks water around the on/off switch and around bottom of unit. low pressure.


Probably your seals are bad and they are leakyng ... Karcher K2.26 Electric Power Washer

No power on electric durabuilt 1400 pressure washer


Sounds like a pressure switch is sticking. usually causes this problem especially after being stood for a while not used.have\015\012to remove cover to get to pressure switch, remove pressure switch\015\012piston clean regrease with silic ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Jammed pressure switch on craftsmen electric pressure washer


... Pressure Washers

1700 PSI Pressure Washer will not turn on - Power Stroke Recertified - PowerStroke 1700 PSI Electric Power Pressure Washer


... Power Stroke Recertified - PowerStroke 1700 PSI Electric Power Pressure Washer

Karcher 620M Pressure Washer. No electric power


... Alfred Karcher K 5.93 M Electric Pressure Washer

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

Power washer will only run when sprayer is on low pressure as soon as sprayer switched to high the pressure washer quits


... Earthwise PWO2200 2,000 psi 1.6 gpm Electric Pressure Washer

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

Simoniz S1400 Electric Pressure Washer


Most of the Simoniz pressure washers are, in fact, rebranded Karcher pressure washers. You can't find support or documentation on their website for machines they no longer make. However, there is a handy dandy website that you can use to find older v ... Karcher 2500 PSI Pressure Washer

I have an electric power washer k3.99M. I just replaced the pressure hose and now the washer will not turn on. If I remove the unit from the water hose, it works, but when I hook everything back up, it doesn't.


This sounds like the hose is plugged or the nozzle itself is plugged. If the water cannot get through, the washer senses that the trigger is off and will not turn on the pressure. First just attach the hose without the gun and nozzle. If it pumps w ... Karcher Pressure Washers

Kranzle Pressure washer...seems to be no power to the machine..checked switch and all connections all fine but no power to the machine


Could be that the fuse in the plug needs replacing.Does the machine make any noise? Does it buzz/hum when you try to turn it on? - If yes, a starting capacitor is required. ... Electric Kranzle Professional 1600 PSI Pressure Washer

I have a McCulloch H.P. power jet cleaner 1300 and when i switch the device on the motor starts running but the pressure is not building up so no water is coming out of the pressure washer gun. We bought the device in 1999. Or alternatively is there anywhere in the UK to get the repairs carried out? Many thanks Michele.


... McCulloch Pressure Washers

PRESSURE WASHER PULSES, - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

I have a karcher electric pressure washer, 1850 psi. It will not turn off with the on/off switch. It started to cycle on and off, but after pressure washing a shed, the pump is on conyinuously and will not shut off.


Pressure switch check it ... Karcher K2.26 Electric Power Washer

My Karcher 1750 psi electric pressure washer is making in/out loud noise when switch to On and idling not pressing washer trigger.


Thats normal, it is reducing the built up pressure that is not needed until the trigger is pulled. ... Karcher 1750 psi Electric Pressure Washer

Karcher B402 pressure washer Motor runs as soon as power supply connected, on/off switch does not seem to make a difference and no pressure at outlet? Was working fine, stopped for half an hour, came back and wouldn't work. Thanks Bob


Bob I had this happen to my Karcher, the pressure seals have blown. $Au200 for service and replacement from karcher dealer. tyhey would not sell the parts for a DFY ... Pressure Washers

When I turn on the shop force 1750 electric power washer I get water pressure in intermittent time frames. For example, it may run for a second then stop for ten seconds, then start again for three seconds then stop for 3 seconds then start for a half a second then stop for five seconds etc. until ?. This type of pattern continues for at least ten minutes, which is when I give up. I have tried adjusting the the water hose pressure, high, low. middle, nothing changes. This happen when I have the


The usual cause of this is sticky Orings in the water admitance valve.\015\012\015\012Take the valve apart and clean the bore with crocus cloth wrapped around a rod and replace the Orings and lube with a bit of plumber's grease and reasse ... NIB Shop Force Universal Pressure Washer Accessoriesnib

I started working with the Karcher KB4040 pressure washer and all was well for 1-2mins, then it sputered a bit and all power died. All hoses were still attached properly, it hadn't blown a fuse in my house and the fuse in the plug of the washer is working fine.When I switch it on I get nothing. Do you think the motor has packed in? I borrowed the machine from my neighbour who's away on holiday, so don't know much about age of the machine. Any advice much appreciated.


If the water is in anyway impeded, like kink in hose the unit turns off and goes into protection mode. That it it shuts down for a pewriod of time depending on how hot it may have got.\015\012When its rested try it again ensuring you definitely ... Karcher 1750 psi Electric Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1299 seconds