Having problems with your Comet BXD2527 Pressure Washer Pump ?

My pssure washer the pump will not kick on so i have very low ater pressure


Answers :

The water admitance valve is stuck, likely due to deteriorated O Rings.
\015\012
\015\012The valve senses the high pressure and turns off incoming water thus regulating the pressure. Take valve apart and clean the bore with a dowel rod with crocus cloth. Replace the O Rings and use lube on them such as a light bit of plumber's grease and re-assemble the valve!
If you take the valve body on the pump apart very carefully you may found a broken return spring or a blown out rubber o-ring if the engine runs but the pump doesnt pump high pressure check your pressure relief valve sounds like its stuck open.
Repair Help & Product Troubleshooting for Comet BXD2527 Pressure Washer Pump

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My pssure washer the pump will not kick on so i have very low ater pressure


The water admitance valve is stuck, likely due to deteriorated O Rings.\015\012\015\012The valve senses the high pressure and turns off incoming water thus regulating the pressure. Take valve apart and clean the bore with a dowel rod wit ... Comet BXD2527 Pressure Washer Pump

My Karcher K3.48M pressure washer remains in the low pressure mode even when I return the pressure nozzle to the high pressure position. How can this be corrected. The pump seems to build up the pressure because when I release the handle the pump motor stops. This is a fairly new pump which was purchased in the latter part of last year(2010). Could this have been caused by the detergent I have been using which is an automotive shampoo? Please help I love this washer and for the times that I u


... Karcher PSI Electric Pressure Washer

Water pressure? I read somewhere that low pressure of the incoming water will make it so that the items on the top drawer will not be as clean. I don't see how this can be the case, as I thought that the way the washer worked was that the washer filled (at whatever speed) and then the machine itself pumped the water through the system at the appropriate pressure. Please clarify.


Mom...not true. The water fills the machine which then uses its own pump to spray the dishes with the water/detergent. If your dishes are not getting clean, use the recommended amount of detergent. Hard water will require a spot treatment like Jet ... KitchenAid KUDR01TJ Dishwasher

When the washer is at rest with water on and power on the pump runs on and off on its own but when i pull the trigger the washer works fine in low pressure and high pressure


... Pressure Washers

I have a Pressure problem on my PowerCraft pressure washer. On initial switch-on the machine runs at low pressure. If I then rotate the end of the lance to detergent application mode and then rotate it back to high pressure mode the high pressure kicks in and all is well. Is the lance faulty?


... Pressure Washers

Shark pressure washer with honda 5.0hp motor when in use spraying with good pressure it the pressure shuts off and motor sounds like its about to shove a rod through the cases shut it off restart it andd the same thing occurs all fluid levels good pump and motor. water pressure from hose bib good. may b low water pres. for short time due to possible kink in hose reel not sure


What type pump oil to usefor karcher 2400 psi ... Honda Pressure Washers

Water Pressure Too Low in Washer -- Pump going bad?


Another posibility is the filter below the bottom jets has become clogged. My kids putting things in like chewing gum and broken glass did not help. I even had wood particles from the counter top in there. You do have to take a few layers of the rota ... Whirlpool GU2400XTPS Built-in Dishwasher

I recently replaced the water seals, V-packing & all six check valves in a CW-3504-4MGH pump on a MiTM 3504 pressure washer that had very low pressure. Usually this would fix most pressure problems on most machines, but in this case it had little to no effect. I suspect that the unloaded is the culprit in this case, but since I have had little experience in repairing unloaders (let alone adjusting them). I would appreciate feedback from anyone that has experience in this area. Thanks


Check the wand tip for a tiny piece of debris like a tiny rock or something stuck in the tip. ... Mi T M Pressure Washers

Husky 2600 PSI Pressure Washer low pressure tap water flows thru the pump and out the nozzel but no high pressure flow


... Briggs & Stratton Pressure Washers

NO PRESSURE Hi, I have a generac 2500psi pressure washer. But it has no pressure. It does not sound like the pump motor kicking in when i pull the trigger. Any input helpful.Thanks Steve


Check the coupling or the belt between the engine and pump. unsure which this washer uses. the pump may also have failed, usually it is the coupling or belt broken or slipping ... Briggs & Stratton Pressure Washers

Low pressure I have dewalt 3800 pressure washer and it went from working fine to a bit more pressure than a garden hose. The screen is clear at the water intake witch leads me to think it's the cat pump,but how do i know.


Hi\015\012some valves at cat pumps need a 100 psi pressure to open and close correct.\015\012when there is air in the pump the valves wil not open and close till air is bleeded.\015\012take of highpressure hose, open watertap and bleed pump till no ... Dewalt 3800 PSI Pressure Washer

My Karcher 695 pressure washer work well when initially started. If stopped and restarted the pump runs but the output pressure is very low.


... Karcher Pressure Washers

Troy Bilt pressure washer model 020489 has very low spraying pressure. How do I repair the pump?


... Pressure Washers

Troy Bilt pressure washer model 020209 has very low spraying pressure. How do I repair the pump?


You are going to need a pump seal kit or they may call it a rebuild kit but this sort of thing happens often and you should not have any trouble getting the parts you need with the kit should come a exploded view diagram but request one just to make ... Pressure Washers

I have gcv 160 5.5 hp power washer my problem is that the high pressure pump is not working properly when the engine is running the output pressure is very low so i would like to know could be the possible cause of that problem


look for a black plastic cover with a silver snap on top; pry off the silver snap and lift off the plastic cover; next remove the two screws on the top plate then pull out the piston inside - if unable to lift out, start unit and watch it pop ... Karcher 2500 PSI Pressure Washer

I was given a low hour, 10 year old, CH PW205002LE 6.5 HP gas vertical shaft 2000 PSI/2.5 GPM pressure washer with a Lavor pump. It did not work - no pressure. I found a broken o-ring on the brass unloader valve and replaced it with a ring as close in size as I could find as the part break down doesn't state size. Everything was very clean. I coated everything with silicine grease and reassembled, seating the brass piston? as deep as it would go. I had to press the trigger in order to get the mo


My personal experience is that 40% of all the sellers I dealt with on e*** exaggerated their products or worse. If you decide to go the e*** way be sure you put it on a good credit card so you can get your money back if it's a bust. Don't use your ba ... Campbell Hausfeld Pressure Washers

Pump will not kick up to high pressure


... Pressure Washers

Low pressure from Coleman pressure washer


... Coleman Pressure Washer PW0881800

My washer no longer cleans the dishes. the functions all work but it appears that the pump pressure is too low to get stuff off the the dishes.


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher ... Bosch SHU9925UC Built-in Dishwasher

Coleman APW-VB-1400A Pressure Washers, pump runs but low presure


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a Coleman powermate clean machine pressure washer 2500 psi 2.36gpm and has a 6x200 honda 6.5 horse motor. I just bought at a garage sale.It started just fine when I got home and in less that 2 minutes quit. It says the engine will stop automatically when low on oil. what kind of oil should I use and for the pump what kind of oil do you use?


... Coleman Pressure Washer PW0881800

Honda 2500 pressure washer pump won't kick on


... Honda Maxus Pressure Washer MX5222

I have a DeVilbiss pressure washer, Serial# 2251136878, Model# WVRH2421, Radial Pump# D28703, with a 5.5hp honda motor. It has no pressure. If the pump can't be fixed, is there another brand of pump that will fit this model pressure washer?


THE PUMP FITS THE MOTOR and the pump i always use is a ROYALPUMP made in Italy and they are long lasting and easily serviced ,any of the Italian pumps are good ... Pressure Washers

Turn water on then actuate wand trigger. Pressure washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic oulet tube is leaking causing low pressure leak out of bottom when trigger is actuated and causes pressure switch to cycle when the trigger is released. Any Help? This pressure washer is approx 18 months old!


You gave a very close solution yourself for the problem. But other leakages can cause such symtoms.Forexample a leaking head or a leaking chemical inlet. These can be caused because the spill valve (pressure control valve) is stuck. When this valve s ... Karcher PSI Electric Pressure Washer

Cat pressure washer pump rebuild kit - Caterpillar Cat Pump Pressure Washer Pump 3SP30G11


... Caterpillar Cat Pump Pressure Washer Pump 3SP30G11
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0786 seconds