Having problems with your Comet GXD2527G Pressure Washer Pump ?

I have a Pressure Washer VR2500 , 6.5 horsepower / 2500 PSI number on side 123K12-0134-E Residential - Excell. I do not know which is the oil drain plug for the Pump on the bottom. There is an Allens Wrench plug on the side. However when removed nothing comes out. There is also an Alans Wrench like plug towards the back, that does not want to come out. Which one is the correct plug and do you have a picture as I could not order an Owners Manual on-line? Please Advise!


Answers :

Hi and welcome to FixYa, I am Kelly
\015\012First here is the owders manual:
\015\012http://www.excellpressurewasher.com/documents/pdf/D30494-E.pdf
\015\012
\015\012There are 3 versions of the VR2500 Pressure Washer.
\015\012
\015\0121 being the VR2500 Type 0 It has the comet pump that needs no oil
\015\0122 being the VR2500 Type 1 Also with the comet pump.
\015\0123 being the VR2500-C Again with the coment pump
\015\012
\015\012The allen set screws that you removed hold the bearings in place.
\015\012
\015\012The only pump maintence required is winterization with either a winterizer EX80 or RV anti-freeze
\015\012

PUMP
\015\012

The manufacturer recommends using
\015\012

a pump protector/winterizer, such as
\015\012

EX80, when storing the unit for more
\015\012

than 30 days and/or when freezing
\015\012

temperatures are expected. If a pump
\015\012

protector/winterizer is not available,
\015\012

*RV antifreeze needs to be run through
\015\012

the pump as outlined in the steps
\015\012below.
\015\012
\015\012EXCell does make units that have an AR pump that requires pump oil. The VR2500 pump does not.
\015\012
\015\012Thanks for choosing FixYa.
\015\012Kelly

Repair Help & Product Troubleshooting for Comet GXD2527G Pressure Washer Pump

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Pressure Washer VR2500 , 6.5 horsepower / 2500 PSI number on side 123K12-0134-E Residential - Excell. I do not know which is the oil drain plug for the Pump on the bottom. There is an Allens Wrench plug on the side. However when removed nothing comes out. There is also an Alans Wrench like plug towards the back, that does not want to come out. Which one is the correct plug and do you have a picture as I could not order an Owners Manual on-line? Please Advise!


Hi and welcome to FixYa, I am Kelly \015\012First here is the owders manual: \015\012http://www.excellpressurewasher.com/documents/p ... Comet GXD2527G Pressure Washer Pump

HI. Trying to install a LDF6920ST Dishwasher. Question about the wiring. The wires coming out of the machine are Black, Green with a yellowish stripe and White (the white one has a label attached to it with a "N" on it). The plug wires are 3 side-by-side. They are gray, green and gray. Which wires do I connect with which wires?.


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Hi I have a karcher 360 thats working fine with everything from the water side of it but it has lost its pressure and only comes out like a hose, can you please advise of the problem...... Thanks Geoff


Check the pressure relief valve, it is stuck open and not letting pressure increase in the pump ... Karcher 2500 PSI Pressure Washer

Whats the secret to getting the chopper unit back into the unit. There Tip was to use a small wrench or pair of pliers to compress the spring and align the unit. However , even with it fully compressed , the angle is right and it dosen't want to line up . I know to get it off, they advised to pull up. So it must be the opposite to replace it. I've been trying!!


Its spring loaded,so take a small tool and hold back as you insert back into mount.God bless,tom ... KitchenAid 24 in. KUDI01IL - Multiple Color Free-Standing Dishwasher

My bcp tw1303 last time I plug it in it came on now it want come on.


... Electric Pressure Washers

My portable dishwasher hose that attaches to the faucet is to short for where I want my portable dishwasher to sit. I would like for it to sit in one spot. I am not allowed to alter or cut holes in the side of cabinets, I am renting. Is there an extension for the hose to the faucet? If not, what can I do to make the hose longer? If I really have to I will cut the two hoses that comes from the dishwasher to the faucet, but I would rather have an extension first.


You should be able to find extension or replacement hoses that you can use to extend the existing hoses at a hardware store. If you need to join two hoses that have female connectors, adaptors with two male connections are available. ... Dishwashers

KitchenAid KUDPO1IL dishwasher has a buzzing noise during wash (and rinse?) cycles. Recently had to replace the top spinner (and connecting screw), as it had fallen off, but I think the noise was happpening before that. Today I re-clipped the flat pipe at middle back; one side had come loose. That might have helped a bit. Previously, I took out the bottom spinner and found a 1-2" string-like strip of gray nylon under that. I wanted to check a grinder, to see if something was trapped in that, but


... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Bosch dishwasher fuse keeps blowing as soon as it is changed and the plug socket is switched on. There is a flash coming from somewhere away from the socket itself, but it is hard to work out whether it's behind the dishwasher or to the side of it because it's obscured.


... Bosch Dishwashers

Moffat dishwasher The door has come repositioned on the left side and it will not shut properly and when the door is all the wway open, the bottom rack will not pull out smoothly without lifting it up slightly. Haven't tried it since the problem arose as I was afraid that it would leek. also I didn't want to force it back into position for fear that I ould break it. I bought it Aug., 2006. It is a Moffat Model #MHDD210LOOWW.


... Dishwashers

Karcher 2400R I have not used my pressure washer for 6 months. It was left full of gas in the garage. I tried to start it but it would not fire up so I change the gas, oil, and spark plug, took apart the carburator and cleaned it out with carb cleaner. I went ahead and put everything together, pull the cord and wanted to start. While trying to start it after I sprayed starting fluid in the air cleaner I noticed that gas was coming back from the crankcase breather hose into the air filter choking


You have a poor signal to the spark plug usually caused by a rusty fly wheel found underneath the pullcord casing. clean it with releasing ajent such as wd 40. common when not in use for a while. ... Karcher 2500 PSI Pressure Washer

Door mechanism door has 2 springs on each side, on the right the spring works on its own. But come to the left side and it has a long belt type piece of metal,the spring and a hook type piece that makes up how the door opens and closes.this left side has come apart and dont know how it goes together,therefore the door just drops very sharply to the dismay of my partner.plz reply to [email protected]


Wind metal strap around plastic bush and hook above hinge ... Candy 24 in. CD622 Free-standing Dishwasher

How do the back and side panels come off? I have removed the screws from along the front around the door seal and from under the kick plate, but the top panel is somehow just clicked on keeping everyt


... Bosch 24 in. SGS56E02 Exxcel Built-in Dishwasher

Want start lights come on but water want come out


DO YOU HAVE A FILTER ATTATCHED? DID YOU PUT A VALVE ON YOUR PRIMARY WATER SOURCE? I F YOU DID THEN YOU SHOUD CHECK TO SEE IF YOU TURNED IT ON. iF THATS NOT IT THEN SOME TIMES ON NEW REFRIDGERATERS THEY PLACE A LEVER OR A BUTTTON . oNE MORE QUESTION D ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Model WDB212RBMO (1994) is leaking where the water comes into a plastic piece on the side. It connects through to the inside.The piece is molded to the unit and has a hole in the side that looks like it was designed that way. No idea why. But this is where the water comes out while it's filling the tub.


... Westinghouse Dishwashers

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?


The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

I see the oil plug on my B&S pressure washer but i can't reach it. (B&S 2000PSI) The pump bracket is blocking the oil plug, so you can't reach the the oil plug with a 3/8" drive socket wrench. How do you loose the oil plug??? stephen


The motor is running squeeze tigger to spray and just hose water comes out no pressure behind it ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Ariston LSI 41 dish washer had intermitant problem of green light not coming on when main power switch turned on and machine not working, the circuit had beed repair before. I played around and got the machine to go through a full circle once then would not go again. So I have put a new circuit board with switch etc. still the switch panel light dose not come on, i found bad connection in connector which comes from small plug on circuit board, (two red wires )I have checked for power to board. W


... Ariston Technologies Dishwashers

Washer won't start tried everything , I could think of changed spark plug tried new gas , Two things that bother me are . if i take out the spark plug and put my thumb over the spark plug hole theres no pressure and the wire that comes from the coil to shut off the pw it has continunity from the coil to the pin that sticks up to shut off the pw but it also has continuity from the coil to all parts of motor.


... Pressure Washers

Display shows no water coming in but hear water coming in on side replaced intake valve but still showing no water coming display still fllashing


\015\012Hi\015\012You would need to check for air gap on the dishwasher, it may be\015\012clogged. It prevents dishwasher from draining, sometimes the drain flow is\015\012restricted due to gunk. Cleaning or bypas ... Miele G 2670 SCVi 24 in Builtin Dishwasher

I have the above dishwasher shv57c03uc just less than 5 years old. The door latch does not engage solidly. when i pust start button left side lights on indicator right does not come on and i have to push on button twice for washer to come on. When it does come on the cycle is real short and it does not complete a full cycle. I an asuming the circuit board is defective!! does this sound right? if so how can i replace the board?where can i get troubleshoooting instructions?


Hi\015\012\015\012You are right it is the ... Bosch 24 in. SHV57C03UC Built-in Dishwasher

I have a DS605 and DD605, F1 fault comes up everytime I try to cut the dishwasher on also water will emerge in it and the impleller floats up under the rack on the top dishwasher. Both dishwasher comes on the same time and make noise and the F1 with a little rench shows up. They said when the red light comes on the salt reservoir is empty. What kind of salt do I put in.Please advise


... Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher

Our bosch dishwasher runs but no water is spraying on the inside. Is there a water filter clean out or is there a water pump that might be broken? I checked the line coming in and it isn't plugged. I made sure where the stainless line goes into the electric valve that it wasn't plugged to that point. I could see anywhere else to check if it was plugged. I figure there has to be a water pump, but I guess I'm not sure of that either. Thanks for any help..


Hi, welcome to Fixya. \015\012 \015\012By the description you've provided, it sound's like the wash motor is either seized or just stuck, let's hope it's the later. \015\012 \015\012Bosch had issued a service tip about this ... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

I have a whirlpool du1100xtps sudenly stop working when I plug the machine, the stop/drain button comes on, and about 15 seconds later turns off and the normal button comes on but blinking and after about 15 seconds the stop/drain buttom comes on too also blinking and then just keeps going on like that and nothing else happens??????? how can I fix it, or what is wrong with the machine?


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

2 wires from the plug wire to the on/off switch have come off. there are 4 connectors on the switch no1 has come off no2 has a black wire on no3 has come off no4 has a blue wire still on .so do i put the blue or the brown wire on no1 connector


... Karcher Pressure Washers

G851 SC Plus started to trip GFI plug. Called Miele and they said there was nothing wrong with the dishwasher and the GFI was faulty. Unplugged from GFI and plugged into regular plug and it worked for a few days. Eventually stopped running. How wrong Miele was, it had everything to do with the dishwasher and not the GFI. It was only warning me a problem was coming. Appliance man came out, noticed water in bottom pan and order new pump, said seal probably gone. Came back, replaced the pump, put d


... Miele 24 in. Novotronic G851SC Plus Built-In Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1016 seconds