Having problems with your Comet Pressure Washers ?

Comet power washer 2325 ---- Honda 5 hp psi 2,500, gpm 2.30

\015 Problem Water seem like it is restricted spray out at to outlet even if the pump is turn on. Again no load pump action at all. This is what I did so far.\015\012Remove Unloader and clean, remove all valves and clean to make sure none were jam.also check wand and hose, check screen at garden hose connect. with all valve out spray light lub in pump. Pull on motor cord and saw that both plunger were moving.\015\012Reassable turn water on with out outlet hose connected to wash oil out next. water seem to flow fine. next started up motor water still sprayed out of outlet. water would come out of wand with pump pressure. I took off outlet hose and started pump water came out with some pressure if i turn off motor pressure would decress. but again no pump noise. I now turn off water and listen and i heard plunger working . \015\012My next question is the unloader no diffrent if i turn it all the way in or out to the pressure. Could this be my problem. Sorry for the long -mail\015

Answers :

Repair Help & Product Troubleshooting for Comet Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi I have a brand new Honda Power washer GC 160,2600 psi 2.3 GPM my husband taught me how to use it last night and I think I have followed all of steps: 1. hose free of kinks 2. connected to machine 3. purged pw handle of air and made sure water from house coming through 4. pulled out choke 5. turned red button to "ON" position 5. pulled T handle enging starter and it sounds like it will start but doesnt what am I doing wrong??? yes it does have gas in the fuel tank.


... Karcher 2500 PSI Pressure Washer

Comet power washer 2325 ---- Honda 5 hp psi 2,500, gpm 2.30


... Comet Pressure Washers

I just bought a used and broken Power Washer which I plan to repair and use, hopefully. I can't seem to locate operators/parts manual. NorthStar Pressure Washer ? 2400 PSI, 2 GPM Item#: 157472A Serial #: 1106 4728 Bar Code: 157472A11064720 Engine: 6 HP Tecumseh Pump: Comet VRX with brass manifold and stainless steel plungers Drive: Direct Thanks for your help.


... Northstar Pressure Washers

Need owners manual for husky power washer 2.3 GPM 2600 PSI with Honda GVC 160 engine Model HU80722


... Pressure Washers

At the beginning the pressure washer was running but there was no power from the nozzle. I stop the gun trigger, remove the nozzle , it works for 1 minute and stop working again Now the washher pressure turns off on its own after 1 minute or less Honda 2400 psi


See attached link:\015\012http://www.wmpcs.com/index.php?main_page=page&id=14\015\012\015\012If you continue to have the problem you m ... Honda Karcher G2400HH-R Pressure Washer

What type of oil is needed for a Honda GC160 Power Washer? Honda 2500 PSI x 2.3 GPM.


The type of oil recommended for that engine is SAE 10W-30 and the capacity is 0.61 quarts. This and more can be referenced at the website at the end of this solution. I was able to find the owners manual of your particular engine. http:/ ... Honda Pressure Washer PSI 3000

My neighbor just gave me a Troy Bilt 020207 power washer. It is 2450 PSI and 2 GPM. He snapped the pull cord rope. I looked at the pull cord cover and it seems to have 3 rivets holding it to the main housing. How do you recommend to repair or replace the pull cord?


Sounds like a briggs engine, DONT remove the rivits, go down a little further and remove the 4 3/8 bolts that hold the blower housing on.Turn it upside down, prewinf the pulley in the direction that it turns when the rope is being pulled. When it sto ... Briggs & Stratton Pressure Washers

Lack of power when using - Karcher K 5.85 M 1,850 PSI 1.5 GPM Electric Pressure Washer with Hose


I fixed mine works good easy too watch my video step by step i put it on youtube ... Karcher K 5.85 M 1,850 PSI 1.5 GPM Electric Pressure Washer with Hose

The washer will run about 2 min. then die. i have checked the oil, air filter and gas. it has good presure when running then it acts like its out of gas by stalling and dieing. Problems with Mi T M 13 Hp, Honda Ohv, Compressor, 3500 Psi 3.7 Gpm, Belt?


It is possible that the oil pressure switch is not functioning properly or you have a lighter oil in the machine than is recommended.Post a comment if you need more assistance. ... Honda Pressure Washers

I have a Husky 2600 Psi 2.3 GPM Honda powered gas pressure washer. When i turn it on the motor runs fine, But when i squeeze the trigger the water is not pressurized when it comes out. How do i fix this problem?


... Honda Pressure Washers

What valve lash should me GX 390 be set at? - Simpson Taskmaster Industrial Gas Powered Pressure Washer 4000 PSI @ 3.5 GPM Honda GX390 Engine And 50' Non-Marring Hose #TM4000BD


Inlet .006 exhaust .008 ... Simpson Taskmaster Industrial Gas Powered Pressure Washer 4000 PSI @ 3.5 GPM Honda GX390 Engine And 50' Non-Marring Hose #TM4000BD

I have a Coleman powermate clean machine pressure washer 2500 psi 2.36gpm and has a 6x200 honda 6.5 horse motor. I just bought at a garage sale.It started just fine when I got home and in less that 2 minutes quit. It says the engine will stop automatically when low on oil. what kind of oil should I use and for the pump what kind of oil do you use?


... Coleman Pressure Washer PW0881800

DO YOU HAVE A PARTS BREAKDOWN OF THE PUMP - Simpson PowerShot Commercial-Duty Gas Powered Pressure Washer 3200 PSI @ 3 GPM Honda GX270 Engine And 50' MONSTER Hose #PS3200


... Simpson PowerShot Commercial-Duty Gas Powered Pressure Washer 3200 PSI @ 3 GPM Honda GX270 Engine And 50' MONSTER Hose #PS3200

My Troy Built 2500 psi power washer with Honda engine GCV has been stored for 2 years. I changed the gas and could not get it to start. Which is the start position for the valve on the gas line - Horizontal or Vertical? Thanks, Bill Gray Melbourne Beach FL


... Pressure Washers

I have a power washer, craftsman &.0 horsepower, 2900 psi, 2.3 GPM model number 580.752410. i was starter to wash my car, and stops? i change the spark plug, andput new oil in there. still do not working. some one helme in this problem.


... Craftsman 3000 PSI 27 GPM Briggs Stratton Powered Pressure Washer

Where can i find a service center - Simpson Taskmaster Industrial Gas Powered Pressure Washer 4000 PSI @ 3.5 GPM Honda GX390 Engine And 50' Non-Marring Hose #TM4000BD


On the internet. ... Simpson Taskmaster Industrial Gas Powered Pressure Washer 4000 PSI @ 3.5 GPM Honda GX390 Engine And 50' Non-Marring Hose #TM4000BD

Hi, I have a Dewalt pressure washer 3100 psi. I want to know why the pressure washer works okay for 1 hour then it stop working completely. the oil is fine, the spark plugs are okay, and when I tried to start it again it does not work. Can you please tell me what could be the problem? This pressure washer is almost brand new I have used it for only like 30 hours for 2 years that I have it. I used it couple times lately but same problem it works for 1 hour then it does not work any. I will


There are two common issues that will cause what you are describing. What you need to do is run the machine until it dies as you are describing. Then pull the spark plug and check for spark. If you do not have spark you have a failing stater. It is v ... Dewalt DPH3100 Gas Pressure Washer

Karcher max 2700 psi 6.6 gpm 140F spray gun - Oregon 37-068 Pressure Washer Spray Gun With 12-Inch Lance Medium Duty 2,700 Max PSI 6.6 GPM 140-Degree F Max 1/4-Inch Male Inle


... Oregon 37-068 Pressure Washer Spray Gun With 12-Inch Lance Medium Duty 2,700 Max PSI 6.6 GPM 140-Degree F Max 1/4-Inch Male Inle

No soap to power washer honda gcv 190 - Honda 2500 PSI Gas Pressure Washer


... Honda 2500 PSI Gas Pressure Washer

I am trying to get the pump info. for a north star power washer. All the info. I have is ser. # 157346-0698 2777 The pump is a Admiral model xlg 3035 m I need the gpm,psi for this power washer. Thanks for all your help Wayne


... Pressure Washers

Whe using the honda 3000 psi power washer, I've


Are you putting the soap nozzle on the end? Either that or depending on what type of nozzle you have, some times you pull out or push in the nozzle to switch it to soap.There has to be no pressure to draw the soap, so you either have to p ... Pressure Washers

Owners manual Homelite pressure washer - Homelite Pressure Washer. Honda 2700 psi 2.4 GPM Gas Pressure Washer


... Homelite Pressure Washer. Honda 2700 psi 2.4 GPM Gas Pressure Washer

My Honda 2600 psi power washer will not pull to start. It was running great then I allowed the neighbor to borrow it. He ran the washer till it was out of gas and proceeded to refuel and at this point it would no longer start. The pull cord is out about 4-6 inches out and I am concerned about taking the casing off myself. Fearing that it may throw more off on the unit. If i take the casing off are there any spring loaded parts that will dismount? What should I do? Spark Plug? Turn


You should be fine to take the recoil off, there shouldn't be anything that shoots out at you. You might want to check the oil level on the engine, many of the Honda engines won't start unless there is enough oil in them. If your oil level is fine, c ... Honda Pressure Washer PSI 3000

I have a 4,000 psi, 4.5 gpm 45G cat pump powered by a 13 hp honda engine I can not seem to be able to adjust the unloader valve to give me pressure over 950 psi and even at lower pressures, the pump will not deliver consistant pressure without bouncing off to the relief stage and back into the tank Are unloader valves worth repairing, or should i look at just buying a new one my current thought is to buy an EZ start Pulsar


I would just purchase a new unloader valve, they usually aren't worth rebuilding. I would like to have a picture of the set up that you have, if you can send me a picture of the unloader region of the pump I can get you are price on a new one. email ... Honda Pressure Washer PSI 3000
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1334 seconds