Having problems with your Danby counter dishwasher ?

Says e2

Our Danby counter dishwasher says e2 could you explain te meaning please

Answers :

Repair Help & Product Troubleshooting for Danby counter dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher will not start. If you unplug it and plug it back in it says 1H, no matter what button you press it then says 2H and if you press another button it will say 3H until it runs through to 9H then will display --. It will continue to do this until you leave it alone and walk away. Then after a few moments it will clear itself out and the 'Normal' light under cycles will continue to blink. The dishwasher is 3 maybe 4 years old. Please help, I have a 3 year old and an 18 month o


Hi,There could be Few Possibilities.Let's try to Reset. 1h, 2H -----9H usually shows delay X hours Display where X would be 1,2...9.Turn the Power OFF for few minutes, say 5 Minutes and then Turn it ON. ... Dishwashers

Dishwasher sounds as if it starts cycle, then stops, bleeps, and Fat and prewash lights come on. Manual says to turn off machine, turn off tap, wait 30 seconds and turn it all back on, but it doesn't make any difference. Manual says 'If the above does not solve the problem, check that the water feed pipe is not blocked' however, it doesn't say where this is, or how to do it. Please help!


Hi.You need to check the water inlet hose, that is the hose connected to house water faucet at the back of the dishwasher.Checck for blockage in the hose and ensure that the inlet hose is not blocked or kinked.If t ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Purchased 3 days ago. How do you know when cycle is complete? Lights never go out, doesn't say in owners manual? What dry setting should I use? Manual doesn't say, dishes are still wet when I let


... Electrolux EIDW6105GW 24 in. Built-in Dishwasher

I have a Kitchenaid Dishwasher Model KUDC25CHSS1. (Manual says KUDC25CH). The Delay Hours button is stuck on 2 hours. The manual says to cancel it, press it until no lights are on, but when we press it, the Child Lock light comes on. I tried pressing Energy Saver Dry to cancel the Child Lock, but that didn't cancel it. I tried turning off the circuit breaker for 5 minutes, but the same light(s) come back on when I re-set it.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

We have just had a Hotpoint FDD912 dishwasher delivered but we can not change the language to English from Italian. The manual says turn on then press the P button and start button together but this does not work. When you power on it says Benventui but quickly goes to Autosuperwash and we you press P and start it just starts the programme.


... Dishwashers

I am looking at buying two different ( I think) GE Dishwashers. 1 The "GDWT260R10SS" which in the Sears site says its Energy Guide rating is 280 or the GDWT260RSS which the GE site says 384 kWh. ARe these the same units and if so why the different model numbers and energy ratings?


... Dishwashers

Where can I find parts for a Model GLDB653AB2? Says Frigidaire on the outside, but the sticker inside says Electrolux.


Try repairclinic.com ... Frigidaire Dishwashers

I have had a repairman come out and look at this and he says all the diagnostic test say everything is okay. My problem: my dishes come out dripping wet...like it hasnt dried anything. Sometimes dishes are still dirty. I don't think there is any heat getting to anything. I run the water in the sink beforehand to try to get the water hot. I used this dishwasher for 1-1/2 years with no problems and now I have this problem. What is going on?


I am having the same problem but do not see any posted solutions. Have you solved this problem? ... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher

Dishwasher will not drain. Red light flashing / on. Manual says undo "stopcock". Manual does not say what a "stopcock" is


Stop **** resembles a threaded hole with a bolt screwed into that hole. Basically its a manual drain similar to any cars radiator's drain plug/****. There must be something which is blocking the normal drainage tube, hence the machines is indicating ... Dishwashers

On the front of my dishwasher it says add salt add rinse aid check water. the red light comes on when i need to fill it up. Now the red light has come on saying check water... I don't no wht to do


This solution is for a Bosch, Siemens or Neff d/w. Please repost with Make and model if you d/w is none of the above.\015\012The tap signs or 'check water' means there is a problem with the water flow in or out of the machine. if you remo ... Dishwashers

My maytag eq plus dishwasher will not work. the delay button says "2" and the heavy duty says"9"... nothing else responds


... Maytag MDB7100AWB Dishwasher

The cycle is mistiming--it will start out saying 70 minutes, but 10 minutes later it says 29 minutes.


... GE Profile PDW7700G Built-in Dishwasher

I cannot unlock the controls on the panel - i just bought a house that has the whirlpool gold quiet partner dishwasher and when i press any button nothing happens but says controls locked - i unlock the controls and try to turn on the dishwasher and still happens and says controls locked again. can you help?


Try turning the circuit breaker off for 30 minutes. Then turn back on and see. If it keeps locking you may need new control console. Hope this helps. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I have a murray lawn mower powered by briggs and stratton, i'm trying to fing a manual on the internet but it says to put my model number, and on my engine it says that my model number is lev100 but nothing on the internet comes up, i need help. it also has a date (1995-1998). i don't know how many horse power it is.


The model numbers on a briggs engine are stamped into the metal cover above the spark plug and are the first 6 digits the rest are engine codes and type. ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

I actually don't know what type of Bosch I have. I know that is a problem, but maybe you can still help. It has a simple panel that says: Pot Scrubber, regular wash, quick wash, rinse and hold. When I turn on quick wash, sometimes it says 38 min. 45 min. 56 min. We want to keep it at 38 minutes and we don't know why it varies. If we have to open it mid-cycle, it switches to a higher cycle time. How do we set it for 38?


On a Bosch dw, it has a light sensor to sense soil in the water.. if the control feels that the water going through the sensor is not clean/ or clean it will add or minus time..one thing you can do is make sure that your drain line from dw to sink dr ... Bosch 24 in. SHU43 Built-in Dishwasher

Hi I have a bosch diswahser smu 7000. No power when I push button. Manual says its could either be fuse or circuit breaker. Checked breaker its ok. My manual does not say anything about location fuse. Called bosch. And they said they cant tell me. I nee to have a service call. Any help. Thanks.


... Dishwashers

My ge dishwasher will not start its cycle when I press "Start" - the screen that usually says the time remaining says what appears to be "lh" instead. I do not see in the manual what this means!


Problem solved - I turned the power to te dishwasher at the breaker, waited about a minute, and then turned it back on. Everything worked fine after that. ... GE 24 in. GLD5500L Built-in Dishwasher

Bosch Dishwasher SHU42 Stainless Steel Burning smell I had Bosch replace the faulty piece that was part of the recall (it was fine before) I bought two of these the other one is still totally fine NOW the tenant is saying that is smells like its burning.. so they turned it off at the breaker.. Its full of water... now they say its going moldy? UGH. What can be causing the burning smell and how do i fix it please? Thanks


Disconnect the drain hose from under the sink and use a wet dry shop vac to remove the standing water.Then check the main wirng coming to the machine and make sure they are connected properly.there is also an inline fuse located bottom ride side of t ... Bosch 24 in. SHU42L05UC Stainless Steel Built-in Dishwasher

Soap dispenser need to know where the soap dispenser is all i see is a trough that says detergent on one side and the othe side is a dispenser which manual online says its for a rinseing agent


There is a screw cap on the back wall of the dishwasher,unscrew the cap and place your rinse agent in there.I groove on the door is for your dishwasher powder ... Equator 20 in. CD 400 Compact Dishwasher

DU1100xtpt6 stopped working - blinking clean light. Reapir tech says needs new logic board and heating element. Says logic board is under warrenty... can I get board from whirpool with out tech? Where I can buy correct heater? thanks!


If you have "good hands" and a technical orientation, you can manage it by yourself\015\012(board and heating element).\015\012In any case, before buying a new heating element, check element's resistance with a multi-meter, maybe there is no problem ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

My dishwasher will not start. It is a frigidaire / electrolux FDB1050REQ. I have checked thepower....and reset the circuit breaker.......then pushed the start button.....the light comes on on the front of the washer like normal but no water starts filling. I have jiggled the anti water overfill device but still nothing. HELP!!! The front of the dishwasher says Frigidaire, however, the inside of the door where the model# is says Electrolux


... Frigidaire Dishwashers

I just finished a service call for my 5312UC/UC12. The tecnician says he saw water leaking under neath the machine but hoses were secure and no visible crack to the motor housing, The machines pump works but very little water is actually put into the tub, hence no dishwashing. This technician says that this is a repair that most technicians avoid because it takes a long time and costs alot and violated some sort of warranty. He recommend replacement after only 7 years!


This leekage may come from thermostads water isolation ring, just under rezistance leads. There must be a ceramic holder to fix it to rezistance. İf it is broken, thermostad may go down, or rezistance leads isolation (lastic washer) may leak wat ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

My KitchenAid undercounter Sculptura dishwasher Model KUDV24SE will not work. There is a message panel that says: "Rinse and empty energy monitor". The Use and Care Guide does not say where this is or how to find it. Where is it and is this something I can do myself?


I am pretty sure you are reading two different indicaters. One says Rinse Aid Empty, which means your rinsing agent dispenser is empty, This is in the door, unscrew and fill, don't overfill, usually lasts 3 months. Energy monitor is under this and ... KitchenAid Dishwashers

Got a hoover hed 6612/80 been working fine today all four lights flashing and beeping. manual says too much water inlet. one soltion on here says to check water inlet sensor. How do i do this. please help.


... Hoover Dishwashers

When you switch the dishwasher on, where the programme time cones up it says F. we tried to switch it on n restart again but it still says F and makes noise


Says here the overflow pipe night be blocked and needs to be cleared. When it's cleared if you still get a code "F" and it is still trying to pump dispite no water then remove the side panel and you will more than likely see you have water in the bas ... Neff 24 in. S5453X1 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0284 seconds