Having problems with your Danby DDW1899WP Portable Dishwasher ?

New dishwasher already wet inside when opened for first time! Is it ok?

\015 I just bought a Danby DDW1899WP portable dishwasher. When I got it home and unpacked it, the interior of the washer already is wet. Even the plastic-wrapped manual is soaked! Is my washer okay to use or should I send it back?\015

Answers :

My counter-top dishwasher Danby DDW611WLED delivered was wet inside, a strong humid air came out from inside when I opened the door at the first time, I suspected it a returned item but after reading several forums, it looks like that it's normal to have some water inside since the manufacturer makes some tests before ship out. I guess in the normal condition you may not see it wet but when it's been put up-side-down or put on its side, some test water left inside at the bottom may come out and leak to everywhere. The fact is my UPS delivery guy rolled the dishwasher box from his car over the stairway up to my door instead of carrying straight up. If it's true then it's stupid that the manufacturers don't mention this situation could happen in their manual or big notice label on the front door of the machine. Everyone sees this kind of situation can suspect it as a used item, frustrated and then return their products. Anyway, you can call the customer service and let them confirm to you if it's normal or not.
Sounds like it was in a flood.
I'd sure try to send it back.
Be blessed.
Repair Help & Product Troubleshooting for Danby DDW1899WP Portable Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New dishwasher already wet inside when opened for first time! Is it ok?


My counter-top dishwasher Danby DDW611WLED delivered was wet inside, a strong humid air came out from inside when I opened the door at the first time, I suspected it a returned item but after reading several forums, it looks like that it's normal to ... Danby DDW1899WP Portable Dishwasher

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

Do4esnt clean My Bosch SHX33a05 dishwasher has a problem. It fills and drains well but nothing gets clean. It appears as if the arms are not rotating but the inside is wet when I look inside. I have put a bit on catsup on the inside door and even that is on at the end of the cycle. I have opend and clodes the door multiple times during the cycle and bot arms appear to not be rotating. Nothing is blocking them. I have clean the microfilter, the drain screen and open up the impeller to make sure t


... Integra SHX33 Dishwasher

Inside of my dishwasher is always wet - the door especially. Even when I dry it thoroughly, the next time I open the door it is wet. What can I do?


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Bosch SMS6032GB/20 worked fine the first time but does not pump water inside hence the dishwasher stops. There is 1/4 water already inside on the left hand side.


TRy filling it with the sprayer from the kitchen sink . If it washes properly this way, look at the fill valve and the float assembly. Bosch uses a seperate pump for wash and drain. See if it can drain after the test. ... Bosch Dishwashers

Good mroning after starting any program first the pump will run followed by water intake. After a while the machine stops and the light intake/drain starts blinking. Most of the time water will stay in the machine. After pressing the on/off bottom first switching the machine on again and starting a new program the machine pump start running emptying the water but than stops after a short water intake again. I opened the water stop but it seems to be ok. The filter inside the machine is cle


Good morning don't get shocked because ullu ki to abhi subah hi hui he ... Miele 24 in. G892SCU Plus Built-in Dishwasher

Whirlpool dishwasher Model #DU945PWSQ. Soap dispenser opens, but the soap is still there at the end of the cycle. This is a new dishwasher and the first time we used it, it worked perfectly.


... Whirlpool Dishwashers

My Amana ADB1500AWW3 Dishwasher won't allow me to change cycles. I used the quick cycle as I was going out of town. Had my daughter stop by in the evening to open the door so the light didn't stay on. This is the first time I have tried to run it since and it won't let me out of quick cycle. New in September.


... Amana 24 in. ADW862EAS Dishwasher

Matsui mf145 dishwasher appears not to finish its washing/drying cycle. first couple of washes machine bleeped 8 times and dishes were clean and dry. now after around 2 hours machine bleeps for around 1 minute and when opened a lot of suds are left in the bottom of machine and dishes are still wet.


... Dishwashers

I have a Sears Kenmore Elite Ultra dishwasher 665.1315 model. For the last 3 weeks, it keeps having the clean light blinking 6 times pause then 1 blink and pause and repeats cycle again. I have turned off the breaker...I have reset by pressing the heated dry and normal wash until all lights are flashing. It then completes some type of cycle and looks ok. When I opened the door, steam came out and all was hot inside. However, once I try any new wash cycle, it seems to wash but after 1-2 hours and


Call sears service and tell them you need service there is a service flash and will be no charge ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a brand new Blanco dishwasher but im unsure if it is a DWF6XP, DWF4X or DWIN7 model. It does not have a salt dispenser if that helps. Last night when running for the first time i had a plumbing issue where the drain pipe was not set high enough as it states it has to be 500 to 100cm of ground height. Also had a leaking sink drain pipe. Fixed all that and turned machine back on and it pumped all the water that was inside to drain. I have cancelled the program and restarted but now it is ru


Unplug it and wait 5 minutes. Plug it back in. This will reset the machine. Put it on full cycle and allow it to do a full cycle. It should work just fine. ... Dishwashers

I have a frigidaire FDB1050REC0 dishwasher that is working fine most of the time. Sometimes about 40 percent of the time, when we open the main door after it is finished with a normal cycle, we find a big clump of detergent left in the main detergent compartment and the detergent door is open. It is like the detergent is getting wet with the detergent door closed and then when it is supposed to open, the detergent is wet and clumps. We switched to liquid detergent and the same thing is happening


... Frigidaire Dishwashers

Crosley CDC610B Freestanding dishwasher The dial hums when I try to start the dishwasher. If I open the door and bang on the inside of where the timer is a few times, then slam it shut, the dishwasher kicks in and runs the cycle normally. This has been happening the last three times I've run the machine. Any ideas? Thanks!


... Crosley CDC610 Free-standing Dishwasher

I just recently purchased a new fridgidare dishwasher and have tried it four times. the first three times i tried using a tablet and it didn't dissolve at all. this last time i used liquid and it all was piled up by the drain in the front left corner...is there something that i'm doing wrong? or is it a problem with the dishwasher...


Your water is not entering the dishwasher. Could be a kink in your water supply hose or the water supply is not fully on. Perhaps during installation the wires came loose from the water valve underneath.Check these things and report back. ... Frigidaire Dishwashers

I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?


The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

Leaky Dishwasher I recently moved into a new house that has a brand new Magic Chef dishwasher. We haven't even had a chance to use it, but last night discovered water leaking from the bottom onto the floor. When I opened the door, there was about 3-4 inches of water inside. I baled as much of the (slimey) water out as I could, and that stopped the leak. Now afraid to run the dishwasher for fear that it might leak even worse. E71195 Type 777-0


... Magic Chef 24 in. DC4000 Free-standing Dishwasher

I have a bosch SHU8815UC dishwasher. It was already installed when i moved into my apartment - so I'm unsure of the age. The dishwasher isn't functioning. When I open the door, the "Clean" light and the PowerScrub button are red. When i close the door, the light go off but nothing happens. One time I closed the door, it started to rev up but would shut off and beep three times after about 1 min. No water comes out. Any ideas? Thanks! June


... Dishwashers

Kuds301xbt7 Used for the first time and had moisture on the inside of the stainless steel dishwasher door. Is this normal? Controls used were Normal Wash and Heat Dry. Didn't have rinse aid for the dishwasher at the time.


... KitchenAid Dishwashers

Dishwasher FDB4315LFC0 Error code ER uo Second time it has happened. First time, a repairman came and said I needed a new "vent assembly", but I asked if he could "un stick it," so he took it apart and fiddled with it, and it worked for about a month. Now the error code is back, and he warned that if it came back, I should have it replaced. I've only had this NEW machine 10 months -- this shouldn't happen, right? Any suggestions? Thanks.


Who's to say what should or shouldn't happen?Sounds like you need a new vent assembly. ... Frigidaire Dishwashers

I have a Candy CD650 dishwasher which is not washing properly. Basically, the detergent tablets seem to be getting stuck in the tray. Most times I open the door, the tablet is a pile of mush inside the tray. Other times it is on the bottom of the dishwasher - again a pile of mush! Sometimes, it starts the program & sounds like it's about to start a wash cycle, but then gives up! it gives one short woosh, the stops again. Any ideas how to fix this? I don't have a manual so can't look there.


... Candy 24 in. CD650 Free-standing Dishwasher

Have a whirlpool gold dishwasher.The problem is that the clean lite on the control panel flashes not allowing the unit to work.I installed a new disposal and forgot to remove the plug for the dishwasher drain hose.When the flood happened I opened the door in order to stop the dishwasher.Now the unit will not work.The lite flashes 7 time ,then it pauses and flashes 7 times etc.Is there a reset procedure to run in order to get the unit to work or do I need to buy a new control panel?


HI,Can you please give the make and the model no. so that i can give you the manual.Waiting for your reply ... Dishwashers

I have a Miele Dishwasher 2430 Sci. It's been not used for 5 months and when I returned it worked fine for several times (at least 6). NOW the intake/drain light keeps blinking. I have already cleaned out the drain and replaced it properly (there was nothing in there and it was clean). No water is coming into the dishwasher?however I know that the water hook-up is on (the first thing I checked). I turned the water on and off several times and AM SURE it's on now. What else could be


The usual course of events is to check and clean the filter, check and clean the water pump and well, check and clean the waste pipe and any connection to a sink or waste disposal system, then check the inlet warer pressure, then the machine level / ... Miele G2430SCi Dishwasher

The dishwasher sat for 4 weeks in our basement while we remodeled our kitchen. When we ran it for the first time, the soap is just driping down the door..either it isn't opening at the right time, or the water isn't spraying where the soap is opening on the door. HELP


Two things will cause this problem ,1low water pressure to the machine.2blocked pipes check all filters and run the hotest tempture wash on the machine also put two tablets in the hot wash it should be ok.adrian;;;;; ... Kenmore 24 in. 15079 Built-in Dishwasher

SOAP DISPEN DISHWASHER SOAP DISPEN NOT OPENING I bought a brand new LG dishwasher about 6 months ago. I've had a few problems with it. First, it gives off a smell when it operates. Secondly, more often than not, the soap dispenser does not open. I have read the manual and have tried putting a lot less soap but it still does not work. Should I try switching to liquid soap instead?


Is the machine heating ok?, if so then the dispenser and or the electronic control board is most likely faulty. \015\012if the machine is still in warranty call your lg service agent and when the tech is on site, reque ... Dishwashers

Hello, Firstly, thank you for what you do, you help so many people and I know it takes time. I have a Bosch SHE44C06-UC Dishwasher. I fixed the E1 (Heating Circuit) error. First, before I found the writeup about the solder joint, I bougut a new heater and replaced it, ithe part included the element, flow switch and high temp sesor soall are new, then I fixed the solder and E1 went away and the cycle finsihes and the dishes are clean and dry. Still I check the error codes and still have


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1852 seconds