Having problems with your Danby DDW497W 22 in. Countertop Dishwasher ?

About 20 minutes into a cycle (I usually use a rapid wash cycle-P3) the machine makes a loud clicking and grinding noise that lasts for about 1 minute. Any ideas what this could be and how to remedy the problem?


Answers :

Danby customer service told me that it was built into the machine. The machine would shut off for about 15 minutes after that loud noise occurs. Then would finish the cycle after that point? Got infants, buy one of these products! LOL
Repair Help & Product Troubleshooting for Danby DDW497W 22 in. Countertop Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

About 20 minutes into a cycle (I usually use a rapid wash cycle-P3) the machine makes a loud clicking and grinding noise that lasts for about 1 minute. Any ideas what this could be and how to remedy the problem?


Danby customer service told me that it was built into the machine. The machine would shut off for about 15 minutes after that loud noise occurs. Then would finish the cycle after that point? Got infants, buy one of these products! LOL ... Danby DDW497W 22 in. Countertop Dishwasher

The water is pumped out after the rinse cycle then it continues to run and make an unusual noise but nothing happens. The noise is almost a grinding sound. There is also a smell like some part may be hot or the wiring may be hot. I can reset the dishwasher and re-run the cycle up until that same point and it does the same thing again. I have had a repairman out twice in the last six months. The first time he could find nothing wrong because the problem was intermittent and he couldn't see anythi


Timer \015\012\015\012or\015\012\015\012 ... Bosch Dishwashers

My Maytag dishwasher model MDB7130AWB started making a grinding noise tonight during drain cycle. We just had some work done on the sprinkler system and the water main to the house as well as the check valve for the sprinkler system have been turned off and on a lot the last two days. I noticed that we had some dirty water come out of a sink in a bathroom, after that repair. Don't know if that could be related to this problem but it was worth mentioning.


Shut off water to the machine, remove the hoses at the machine and inspect & clean the mesh filters in the water inlets. If dirt did get into the line, it would be from the water main work, not the sprinkler work.It doesn't hurt to clean the ... Maytag MDB7130 Dishwasher

I have a maytag dishwasher. The wash cycle runs for approximately 10 minutes, then shuts off. The timer will say 90 minutes +/- then will go to 1 minute and turn off? There is a grinding noise when the cycle first starts. Any ideas?


... Dishwashers

I have a kitchenaid dishwasher model kuds24se with a problem. I MUST hit cancel before I hit start. Note that it doesn't matter how long it's been since the last cycle. It could be a few minutes or a day or more. I have to hit start to get a complete wash cycle. If I don't hit cancel, the washer goes through some sort of cycle and stops. It seems like a normal cycle but of course it is not because I don't hear any water and, upon completion, when I open the door there is heat but the soap dispen


... KitchenAid KUDS24SE Built-in Dishwasher

My LG Dishwaser LDS4821 all of a sudden has been making a very load noise after a few minutes. This has been happening the last 3 times I have ran it. (also ran it empty, noise is still there.) Is this a problem with the motor? I don't hear it on the rinse cycle. This is less than 2 years old.


First, remove the sump cover in the bottom of the tub to check if any object (like a part of a broken glass or plate) is being knocked around by the impeller or hard food cutter blade. (Note: The screw on the end of the motor shaft has a left hand ... LG LDS4821 24 in. Built-in Dishwasher

I HAVE A BAUMATIC D/WASHER BHD5 TYPE DW-24E1,(ABOUT 8 YEARS OLD) IT IS A WHILE SINCE LAST USED THEN 1 NIGHT AS IF IT HAD STARTED BY IT'SELF IT STARTED MAKING A BEEPING NOISE ALL 4 INDICATING LIGHTS AS WELL AS SALT AND RINSE AID WERE FLASHING HAVE SINCE TOPPED UP SALT AND RINSE AID BUT ROUGHLY 1 MINUTE AFTER STARTING IT BEGINS TO BEEP AND ALL LIGHTS FLASH. COULD YOU TELL ME THE PROBLEM. MANY THANKS


... Baumatic Dishwashers

My Bosch dishwasher, model SHX46A05UC/30 has been working fine. I ran it once today on the Power Scrub Plus cycle (always use this one). Shortly after unloading the dishwasher I needed to run it again with more dishes. Within a few minutes of running the dishwasher I heard loud, almost grinding noises. Nothing appears to be stuck. Any ideas on what to do? This dishwasher has always been quiet up until today.


... Bosch 24 in. SHX36L05UC Stainless Steel Built-in Dishwasher

I have a Beko DWD5410W dishwasher. It has been working well for a couple of years now. Last week is stopped during a wash cycle and now when you switch it on, it fills with water to the top of the filters (as normal?) and stops. Nothing further happens no matter how long I wait unless I switch the machine to drain mode. Do you have any idea what the problem could be or how I can go about investigating further? Many thanks in anticipation


Hi, this is a control fault that is localized in the logic sector of the control board. the logic chip which holds all wash programing is damaged. you will need to replace the control asap if possible...thank u rate me ... Dishwashers

Our LG dishwasher makes loud noises during the wash cycle. It rumbles like the machine is being rocked by an internal force. Could it be a problem with the plumbing? It happens for about 20 minutes of the 2 hour wash/dry process. ... And, the dishes aren't getting as clean as they should, especially where there's grease.


You may have a model which qualifies for a no cost service upgrade. Contact your local LG servicer with the model and serial number. They may replace the sump (AJH31248604) a drain hose (AEM69493803) and a guide assemble (4975DD1001), depend ... LG Dishwashers

I have a GE Quiet Power 3 dishwasher that was working fine last week. Over the weekend I ran it and we could hear a banging noise, so my boyfriend opened it three or four times in a row (during the cycle) to figure out what it was. The fourth time, it went dead. I checked and it had tripped the breaker. I reset the breaker and the dishwasher seemed to be working again, however the lights on the front were flashing (they hadn't previously), and now it will run for about 10 minutes but no water ru


Were you able to figure this out? We have the same problem here! ... Maytag Dishwasher

Hi, I've got a GE dishwasher (model GSD3207P00WW) which is making a horrible grinding noise... it still seems to work, however, it's loud enough that my girlfriend is terrified the machine is going to explode/light on fire/burn the house down/etc... It seems to happen intermittently (although lately it's been worse) and generally only goes on for about 2 minutes, around 2-3 times during each cycle. Any ideas?


I am not able to see the suggestions made by the other fixya consultants but I would suggest the best bet is to open the pump motor assembly (item 310) in ... Maytag Dishwasher

My LG dishwasher is working perfectly, but it seems to be making a disturbing grinding sort of noise washing no matter which cycle I use. i frequently clean the filters, and if it needs oil or salt. What could be the problem???? I hope I get a quick reply. thankyou


Knmv;lkbncvgmj ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I have an kenmore elite "ultra wash" model 665. not sure the rest.. about 7/8 years old, making loud buzzing sound during wash cycles,starts about 5 minutes into the normal wash cycle. i removed the inlet protector and the chopper area and all was clear.clean...it's running now and seems to be pumping the water, but can live with this buzzing noise,,, any idea, is the pump on it's way out ? just stopped as it kicked into another cycle, at 42 minutes...but it will be back, any ideas ? (back alrea


Buzzing sound may be coming from a solenoid that is mounted under the dishwasher, below the tub ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a Bosch SMU2046UC/14 dishwasher that makes some noise but will not start the wash cycle. I found that the noise was from the timer motor by removing the front of the door. The timer continues to run and but only advances until half way through the wash cycle where it stops permanently. Is this a problem with the timer or could something else be causing this problem.


HI. The timer motor mechanism regulates the length of time power is to be routed to each component. If the timer motor does not advance properly, it can result in a wide range of problems. Common symptoms will usually include sticking in a cycle(fail ... Bosch 24 in. SMU40 Built-in Dishwasher

Our LG dishwasher (model LD-1416T), age about 2 years, makes a lot of noise. Could it be the motor, anything we could do to fix it? The noise is especially bad after 2 minutes when you put it on for about 3 minutes and then on and off as the cycle continues.


It would have been easier if you had described the noise I will assume it is a sort of clanking noise. If this is so check that the rotating shower arm is not catching on the basket or any part of the insideYou can usually simulate ... Dishwashers

I have a couple of problems. Firstly, the auto programme now shows a cycle time of 199mins but actually takes much longer than that to complete - more like 4 hours. On the quick (!) wash cycle the time is 97 minutes, whereas it should be less than 30 mins. Second problem, the detergent box flap won't stay shut when loading, so I have to put the tablet in loose in the bottom. Could the 2 problems be related?


There is an issue with the machine not heating properly, it could be the control panel or the thermostat, The flap not staying shut is not connected to this. ... Dishwashers

Eurotech Model EDW254EWXX runs a 13 minutes cycle before washing like usual, but now it is getting stuck and not doing anything during that 13 minute cycle. No water is running, and it makes NO noise at all. We are not getting any errors displayed. I have unplugged it, and shut off the circuit breaker for 20 minutes, but the problem is still there.


... EuroTech 23 in. EDW254E Built-in Dishwasher

Dishwasher makes grinding noise during wash cycle (after pre-wash). noise persists for 15-20 minutes. It seems as though the inlet valve doesn't open during this phase of the cycle. adding water to the dishwasher manually eliminates the noise and water circulates through the wash arms. I'm trying to determine if this is a controller issue or a valve/pump issue.


Water-inlet valve\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012\015\012\011\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\01 ... KitchenAid Dishwashers

When I start the dishwasher, it sounds normal. A few minutes after it starts, it makes a loud, thumping noise that lasts for several minutes. After a while, it stops making noise, but about half way through the cycle, it starts making the loud, thumping noise again. It's loud, annoying, and does not get our dishes clean. We have to wash several dishes by hand AFTER we have run the dishwasher.


I have made the assumption that your d/w is a siemens machine, however if not pls repost with the make and model.\015\012There are a few possibities...check the spray arms are clear by removing any blockages in the holes, check that there ... Dishwashers

Our moffat quiet 2 dishwasher has recently developed the problem that the dishes are not cleaned properly. It does drain water. We've opened the drain cover to check that. There does not seem to be a problem there. We've also started hearing a buzzing sound that lasts a minute or so between cycles. (Not between every cycle though) It's random. We rinse our dishes thoroughly before running a cycle. This unit is approx. 5 years old. Any suggestions?


Check to make sure there are no obstructions blocking the washer heads from spinning. ... Dishwashers

I have a Bosch SHU43 dishwasher, about 6 years old. After starting a cycle, it will run for a while, perhaps 1/2 to 2/3 of the way through the cycle, then shut off. After 10-20 minutes it will start up again, run for a few minutes, then shut off again. It ends up taking about 12 hours for a cycle to finish. The problem started off somewhat intermittent and has gotten worse over the last few weeks. I've checked the electrical box in the front right bottom, and the connection is good. I've even


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012I`m not sure since you didn`t mention it or perhaps I just interpreted it this way, but is it consistent at the same time or approximately or is ... Bosch 24 in. SHU43 Built-in Dishwasher

I just moved into a house that has a Maytag Quiet 300 dishwasher. After about 2 weeks, I'm hearing a VERY loud, almost grinding noise about 6-7 minutes into the wash cycle, then again near the end of the wash cycle. It sounds like a motor thing and I'm hoping to avoid a repair bill right now, the cost of the move wiped us out. Is this something that I can fix, and if not, will continuing to run the dishwasher with the noise kill it?


You can continue to run it. it may correct or else it will get worse.......then u can get back and i will help u decide what to do ... Dishwashers

Miele dishwasher makes grinding noise when turned on, there is a light on front next to inlet/drain. So I poured some boiling water into the dishwasher and then left it turned on and could feel the boiling water coming out of the drain hose so I am assuming it is an inlet problem, as it will drain but will not fill or otherwise work.There are a few small cracks in the outer hose of he inlet hose just below the grey box thing, could that be enough to cause the problem? They are only small so I di


... Dishwashers

Model#lds5811bb--started making noise coming from the water inlet area(bottom left). 3/4's of the way through the cycle, noise became louder and then an error code "le" came on. We tried turning breaker off, then we tried in the rinse only cycle, but 5 minutes into it the "le" code error came on again. I'm fairly handy, so I'm not sure what part I can replace to maybe solve the problem. I can't afford to spend a couple of hundred dollars for a repair man to fix it. I'll appreciate any suggestion


The LE code is a locked motor code. Something may have gotten into the pump impeller. I would take the screens and filters off and clean the and check the pump for something stuck in it. It could also be the motor going bad but I would check the obvi ... LG Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1735 seconds