Having problems with your Dewalt 3800 PSI Pressure Washer ?

Does briggs and stratton make the engine for dewalt pressure washers


Answers :

If it is a DPH it has a Honda engine. If it is a DPD it has a Dewalt engine that is made by either Honda or is a Chinese copy of the Honda engine. I looked at a photo of the engine and it looks like a Honda engine not a Briggs engine. Look on the engine data plate and if it says Made In China it is a chinese copy. If it say's Made In Japan it is a Honda. Some Briggs engines are made in China also so it is hard to tell except by the looks of the engine. The Chinese copy of the Honda engine looks exactly like a Honda.
Repair Help & Product Troubleshooting for Dewalt 3800 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Does briggs and stratton make the engine for dewalt pressure washers


If it is a DPH it has a Honda engine. If it is a DPD it has a Dewalt engine that is made by either Honda or is a Chinese copy of the Honda engine. I looked at a photo of the engine and it looks like a Honda engine not a Briggs engine. Look on the eng ... Dewalt 3800 PSI Pressure Washer

I have a Briggs & Stratton gas power washer. This is the 1st time this year that I have used it. I put in fresh gas, hooked up the water supply. The engine started and then quickly stopped. I had to release the water pressure in the hose before I could pull start the engine. The only way to keep the engine running is to hold down the spray nozzle trigger. Once that is released the pressure in the hose builds up and the engine stops.


Sounds like the unloader is not working correctly. Try replacing it and see what happens. ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Briggs and stratton engine hunting - Briggs & Stratton Pressure Washer Projectpro Spray Nozzle


What is the question??? ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Have a Craftsman 2550 MAX PSI, 2.3 MAX GPM, Briggs & Stratton Powered Pressure Washer seems like the engine is ceased how can I fix it? need a copy of the manual with exploded pic of engine


... Craftsman 2500 PSI Briggs Stratton Powered Pressure Washer

I have a Briggs and Stratton 5.5 hp 2250 PSI pressure washer that lacks PSI. How do I make sure the upload valve is free. It just doesn't appear to be adding pressure to the tank.


... Pressure Washers

I have a Briggs Stratton Model# 020228 Gasoline Pressure washer with a Faip Brand Pump. The engine starts, the water supply goes thru the pump under its' own pressure. When I pull the trigger on the handle, there is not increase of force nor does the pump engage. I had this same problem several years ago and sent it to a dealer for service. His service tag indicated a stuck unloader. Where is the unloader located on this pump. The indentification on the pump is MTPV90736 191693 Order # 52


... Briggs & Stratton Pressure Washers

Two problems please: craftsman 2150psi briggs and stratton engine washer, will not start when hot. and secondly, i was washing with regular pressure, then noticed a pressure drop at the nozzle, then the unit shut down. no water leaks at the manifold. water supply was strong. any ideas?


Nozzle dirty, clean out with small diameter wire. ... Pressure Washers

Home Depot has a lawn mower with the Honda GCV160 Electric start version engine. They also have a pressure washer with the Honda GCV160 engine. I have a disability that makes it difficult to pull the starter rope. I would like to get the electric start on the pressure washer. My local Honda bike shop service center said they use different blocks. Can I get a pressure washer pump mounted to the Honda GCV160 Electric start version engine? If necessary, are there adapter plates that can be purchase


... Karcher 2500 PSI Pressure Washer

My briggs and stratton pressure washer starts up fine but when in hit the trigger the engine cuts off immediately, does anyone know what could be causing this?


... Briggs & Stratton Pressure Washers

When I start my pressure washer on full choke it works fine when I place choke in wide open position gas runs out of the carburetor.what could be wrong.the engine issas by Briggs and Stratton.


You need to take the float bowl off the carb from the bottom . You haven't given a lot of information about who did what to the carburator but somebody must have screwed with the float pisition for this to be happening . The way all carburtors work i ... Simpson WS4050V Water Shotgun 4000 Psi Cold Water Electric Start Gas Powered Pressure Washer W/ Vanguard Engine

How to drain oil from engine - Craftsman 3000 PSI 27 GPM Briggs Stratton Powered Pressure Washer


Square socket on the bottom of the engine. I think a 3/8 extension on a ratchet is correct. ... Craftsman 3000 PSI 27 GPM Briggs Stratton Powered Pressure Washer

Engine wont start. - Briggs & Stratton Pressure Washer Projectpro Spray Nozzle


REMOVE plug and put on to lead and rest plug thread on to a good earth on engine and pull starter cord ,, if spark you have fuel problem ,,If no spark try a nother plug if still no spark remove cowling and Flywheel assy and the spark coil is under t ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Cannot start engine after rebuild - Craftsman 2500 PSI Briggs & Stratton Powered Pressure Washer


... Craftsman 2500 PSI Briggs & Stratton Powered Pressure Washer

Briggs and Stratton pressure washer will not spray water. The engine is fine but water does not flow.


The nozzle on the end of the spray wand has a very small hole in it that can be easily clogged by any sort of debris that comes through the water supply.If the nozzle can be removed, just take a pin & clear the hole from the outside & rinse i ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

How do you start the engine - Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer


Well without knowing your specific engine I will give you the general steps.\015\012make sure there is fresh fuel in it (everyone has forgotten this sometime)\015\012there is possibly an ON/OFF switch on it somewhere. turn that on \015\012then there ... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer

Gas is leaking into the oil tank on a craftsman pressure washer. it will do this while it is running or sitting in storeage. it has a briggs and stratton intek engine.


... Karcher 2500 PSI Pressure Washer

Engine runs fine but will not spray - Briggs & Stratton 2200 PSI Gas Pressure Washer


Check all of your inlet hoses, one may have a kink or a blocked up filter screen. If nothing is clogged your pump has broken and will need replaced. ... Briggs & Stratton 2200 PSI Gas Pressure Washer

ENGINE WILL NOT START - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer


My power-washer suffers from same problem after sitting idle.After paying for a new carburetor, I discovered how important it is to drain the gas if washer is going to sit idle.Another time, we had a problem with the screen co ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

I have a 2550 psi pressure washer with a 6.75 hp briggs and stratton engine with ready start. i wont start. has gas and oil plug looks good. any solutions?


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

I have a Craftsman 2700 psi pressure washer with a Briggs and Stratton 850 engine (80 year anniversary special addition) . It is about 2 years old and used very little and will not start. I filled it with fresh fuel and checked the oil. I also replaced the spark plug and air filter. I checked the fuel line thinking it may not be getting fuel, but there is no obstruction from the tank to the end of the fuel line. I am out of TS options short of taking it to a service center.


Here is the long answer with everything we learned while using a power \015\012washer twice a day for years::\015\012It sounds like could be one of the problems listed below or a \015\012combination of those things.\015\012\015\0121 ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Engine Stops after 10min run time - Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer


Check the breather hole on the gas cap.\015\012run the engine with the cap off and see if it still stalls. ... Briggs & Stratton 020272 Elite Series Portable Gas Pressure Washer

Hello, I have a Craftsman Clean N Carry® 2150 psi Gas Pressure Washer w/4.0 hp Briggs and Stratton Engine. My problem is that I can't get any water to come out of the nozzel. What can I check to fix the problem? Also, where can I get a book to look at for parts and problems?


... Pressure Washers

Campbell Hausfield Pressure washer model 1549. After a few years of storage, I cannot prevent the powerful spray leaking from the connection between the Gun and the Lance. I replaced the O-Ring, and tried other means unsuccessfully. Spray from the joint is almost as powerful as spray from the lance nozzle. The Briggs and Stratton engine has been cleaned and operates well. The pump operates well. But the lance connection refuses to seal.


Hello,Most likely, the housing has split and seal is not being made. There is a chance that the hose is leaking where the fitting is crimped on (my experience, but different pressure washer). Are you able to see a leak when turned off b ... Campbell Hausfeld Pressure Washers

Need a carburator for a generac 6670cp pressure washer with briggs & stratton engine


... Briggs & Stratton Pressure Washers

I need diagram for Craftsman 2200 psi Gas Pressure Washer with 4.5 hp Briggs and Stratton Engine


... Campbell Hausfeld Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1078 seconds